1,560 pounds may be loaded onto the Toyota Tundra. This indicates that if all of the seats are filled by passengers, a load weighing more than 1,000 pounds may be placed in its bed.
The number and weight of people in the truck will determine how much weight you can put on the bed.
Except for the driver, every passenger in the vehicle reduces the payload capacity by a percentage of their weight.
The weight of the passengers and any stuff in your cabin, less the truck’s payload limit of 1,560 pounds, determines how much space you have in your Tundra’s bed.
In This Article...
Can I put a lot of weight in my Toyota Tundra?
You can always load a hefty load onto the back of your truck and carry it that way if a trailer isn’t an option. Although you can’t carry as much, the Tundra is equipped to handle a cargo of up to 1,660 lbs. on several trims when you need to save time. At 1,620 pounds, the Platinum trim has a slightly lower weight rating. That will allow you to fill up more than 42 full-size cinder blocks without exceeding that weight restriction. Avoid exceeding this limit to prevent damaging your suspension.
How much weight is allowed in the bed of a Tundra?
Every 2020 Toyota Tundra will have the same 5.7L i-FORCE V8 engine as standard equipment. With only a touch of the gas pedal, you can feel its strength and hear its roar thanks to its 381 horsepower and 401 lb-ft of torque.
Payload and Towing Features
The Tundra has a powerful engine, but its exceptional towing capacities wouldn’t be feasible without the aid of a number of features and a sturdy frame. The heavy-duty TripleTech frame that is included into the 2020 Toyota Tundra enables the body to endure extreme strain from the truck bed and towing hitch. The Tundra can tow up to 1,730 pounds with this frame in the truck bed.
The TOW/HAUL mode, 4-/7-pin connector, Trailer-Sway Control, optional Integrated Trailer Brake Controller, optional deck-rail system, and the optional 38-gallon fuel tank are additional features that are intended to make towing easier. To summarize what these features do, the driver must manually switch into TOW/HAUL mode for improved braking, pulling power, and throttle responsiveness. The 4-/7-pin connector enables compatibility with a wide range of trailers. While Integrated Trailer Brake Controller gives you control over how much braking force is used for the amount of weight being pulled, Trailer-Sway Control aids in trailer stability. The deck-rail system that is available has four strap-down cleats that can hold up to 220 pounds each. Finally, the big 38-gallon fuel tank that comes standard on the Tundra enables you to go extended trips without worrying about refueling while hitched.
How much weight can the bed of a 2015 Toyota Tundra accommodate?
The 2015 Toyota Tundra is a special breed of tough that is built in America. It’s difficult at work and at home. The Tundra’s optional 5.7L V8 engine can haul more than 2,000 lbs. and tow over 10,000 lbs.
How much weight can the bed of a 2017 Toyota Tundra accommodate?
Maximum Towing: The Tundra can tow up to 10,500 lbs when properly equipped. Maximum Weight: With a 1630 lb. maximum payload, you may pile the bed high and heavy.
Can you put a lot of weight in the bed of a 2019 Toyota Tundra?
Payload: The Tundra has great payload capacity with both engine configurations. With either the 4.6-liter V8 or the 5.7-liter V8, the bed can accommodate upwards of 1,600 pounds.
How much weight can the bed of a 2020 Toyota Tundra support?
You must have the cargo volume and payload capacities to transport your things when you’re on the move. Depending on the configuration, the 2020 Toyota Tundra has payload capacities of 1,520 to 1,730 lbs. There are three different bed sizes available for the Tundra, giving you the opportunity to select the one that best suits your lifestyle: 5.5 feet, 6.5 feet, or 8.1 feet.