Let’s get right to the point: the 1.8-liter 4-cylinder engine in the 2010 Toyota Corolla has a 13.2-gallon oil capacity. And sure, regardless of the trim or model you own, the oil capacity stays the same. Your engine will still require 13.2 gallons of oil whether you drive a 2.4-liter 4-cylinder XRS sedan or a manual transmission.
Pro tip Do not equate oil capacity with your engine’s displacement or the 1.8-liter volume the cylinders occupy. Never mix up these numerals since they stand for different things.
In This Article...
What kind of oil does a 2010 Toyota Corolla need?
Okay, so now that we’ve discussed the engines oil capacity, you’ll also need to think about the type of oil required to keep everything functioning properly. Don’t just grab any old oil off the shelf; look for SAE 5W-20 grade full synthetic oil instead.
What do we actually mean by SAE 5W-20 oil then? The viscosity of the oil is shown by the numbers, which essentially just indicate how thick it is. The oil has a low viscosity at 0F if the number 5 is placed before W, which stands for winter, and maintains a relatively thin consistency even at 212F.
It’s important to follow the manufacturer’s advice, so look for Toyota original motor oil or an alternative that complies with the International Lubricant Specification Advisory Committee’s (ILSAC) 5W-20 recommendations.
Your engine will run at its peak efficiency and be protected from harsh aging if you use the right oil. This is so because synthetic oil is created specifically with more stable synthetic chemical components, which makes it more resistant to deterioration.
To acquaint yourself with possibilities, you can explore online for oil before visiting the store, but your neighborhood car parts and service shop should be able to give you the complete lowdown on what’s best. Use the Toyota-approved alternative, Mobil 1 Advanced Fuel Economy 0W-20 Full Synthetic Motor Oil, if in doubt.
The amount of oil a Toyota Corolla uses.
Follow these instructions to replace the oil:
- Look for the drain oil plug by climbing underneath the Corolla. It is located beneath the engine.
- Slide the drain plug with the oil collection container underneath. The drain plug should be loosened using a socket wrench and a 14-mm socket.
- You can fully loosen and remove the plug to hasten the procedure by waiting until the oil begins to drain from the engine.
- Once the oil is finished, you must find the oil filter.
- Remove the oil filter using a socket wrench or other removal tool and an oil filter socket.
- Wait until all extra oil has finished draining before emptying the oil from the filter into the pan.
- Clean the area surrounding the oil filter fitting on the engine block using a rag.
- Then, take a clean rag and dab some fresh oil on it. Wipe the new oil filter’s edges clean with this oil.
- Reverse the removal instructions to install the new oil filter.
- Reinstall the drain plug and make sure not to overtighten it while doing so.
- The oil cap is located on top of the engine when the hood is opened. Add 3 to 4 liters of fresh oil. Take your time when adding fresh oil to prevent spills and/or overfilling.
- Check the dipstick after you’ve filled it to make sure you have the right amount of oil.
The maintenance light needs to be reset, last but not least. Turn the key to the accessory (ACC) position to accomplish that. Turn off the key after setting the odometer to mileage rather than trip. As you turn the key back to ACC, press and hold the button you used to switch to trip. While you press and hold the button, the light ought to blink.
What is the 2010 Toyota Corolla’s liter capacity?
A 1.8 liter or 2.4 liter four cylinder engine is available for the 2010 Toyota Corolla. The standard 1.8 liter DOHC Dual VVT-i engine in the Toyota Corolla LE, XLE, and S produces 132 horsepower at 6,000 revolutions per minute. There are two gearbox options for the 1.8-liter engine: a 5-speed manual and a 4-speed automatic (ECT-i). Only a four speed automatic transmission is available in the Toyota Corolla LE and XLE.
Toyota Corolla XRS is the only vehicle to offer the 2.4 liter engine. At 6,000 rpm, the engine produces 158 horsepower. Either a five-speed manual or five-speed automatic transmission is available in Corolla XRS models (ECT-i).
Is 0W20 preferable to 5W20?
The Society of Automotive Engineers assigned these oils a viscosity grade, which is a numerical value (SAE). The numbers before and after the W denote the oil weight in cold and warm temperature settings, respectively, while the W stands for “Winter.”
These motor oils both have a comparable, wide working temperature range, and are typically used as winter viscosity oils.
On closer investigation, you will see a few slight variations:
A. Cold Viscosity
The ability of an oil to flow is measured by its viscosity. It also describes the thickness of the oil at various temperature levels.
When operating in freezing temperatures, 0W-20 motor oil performs like an SAE 0W weight oil. While 5W-20 oil functions as an SAE 5W weight oil.
The better the motor oil performs at low temperatures, according to SAE nomenclature, the lower the number before the ‘W’ is. Since 0W20 is much thinner than 5W-20, it is more stable at low temperatures and flows easily through the essential engine components.
A more suitable oil for a typical operating temperature range of -22F to 68F is 5W-20, which has a viscosity that is relatively thicker.
B. Hot Viscosity
At higher temperatures, both oils behave as SAE 20 weight oils. They offer reasonable fuel consumption, improving fuel efficiency while lubricating all of your important engine components.
Both of these grades perform well up to 68 F in terms of their operational temperature range. Under circumstances of high oil pressure and higher temperatures, they are resistant to issues like oil burning and excessive oil consumption.
C. Performance
The thinner oil grades 0W-20 and 5W-20 both work best in cold winter climes.
The 0W-20 oil grade performs better with cold starts due to its reduced viscosity. Additionally, it guards against issues including varnish buildup, engine wear, sludge formation, and low oil pressure. With 0W-20, you may anticipate faster oil circulation and a smoother flow.
Therefore, 0W-20 oil grade would be the best choice for you if you plan to travel frequently in regions with below-freezing temperatures and infrequently in regions with higher temperatures.
However, 5W-20 performs a little bit better in seasonal climates due to its higher viscosity. Because of its somewhat greater thickness, it resists oil thinning at higher temperatures better.
There are some vehicles that can use both 0W-20 and 5W-20 oil. However, consult with your mechanic regarding the suggested oil for your vehicle before switching to a different viscosity grade.
D. Fuel Economy
The mileage and fuel efficiency of both 0W-20 and 5W-20 oil are essentially the same.
Due to its thinner oil flow and low viscosity, 0W-20 oil may provide you somewhat improved fuel efficiency and less carbon emissions.
The type of motor oil you useconventional, synthetic blend, or totally syntheticalso makes a difference. The 0W-20 and 5W-20 motor oils are fully synthetic and will provide the best possible fuel economy.
E. Pricing
Typically, 0W-20 oil costs a little bit more than 5W-20 oil. This is due to the fact that it is more stable than the latter due to being a full or semi synthetic oil.
Your engine oil’s cost varies from provider to seller as well. To choose the most economical alternative for your car, be sure to consult your mechanic!
What are some things you need to understand about these multigrade oils keeping these in mind?
Need synthetic oil for a 2010 Toyota Corolla?
You should exercise caution because putting the incorrect type of oil in your car might seriously harm the motor. Synthetic motor oil of the grade 5W-20 is required for the 2010 Toyota Corolla to operate effectively.
Ask the staff member at your nearby auto parts store for advice on the best oil for your automobile if you have any extra queries regarding motor oil brands and grades. Most staff members will be pleased to assist you in finding the proper oil for your vehicle so you may keep on driving safely.
Check out the Jerry app to discover more about your alternatives for auto insurance while you’re learning about your car’s oil type. For additional information, download the app and respond to a few short questions.
Recommended Oil Change Intervals for Toyota Vehicles
You were supposed to replace your oil every three months or 3,000 miles, whichever came first, according to an old proverb. This is no longer the case, though, as engine technology has developed and become more effective. Toyota advises consumers to have their vehicle’s oil changed professionally or by themselves every six months or five thousand kilometers, whichever comes first.
Recommended Oil Viscosity for Toyota Models
Toyota owners who enjoy DIY projects might be interested in changing their own car’s oil. We endorse this course of action because it offers customers a lot more cost-effective option than even bringing their car to one of the more reasonably priced service facilities nearby. Make sure you are using the right oil if you plan to change your Toyota’s oil on your own. Naturally, as Toyota Genuine Motor Oils are created exclusively for use with Toyota engines, we advise using these. But another choice that is suitable as well is synthetic oil with a viscosity of 5W-30!
Will 5W 30 work in a Toyota Corolla?
* Recommended viscosity (SAE): SAE 0W-20, 5W-20, or 5W-30 engine oil is advised in severely cold temperatures since SAE 10W-30 or a higher viscosity engine oil may make it difficult to start the engine.
Here is an explanation of oil viscosity using 0W-20 as an example.
The characteristic of the oil that allows for cold starting is indicated by the 0W component of the oil viscosity rating. Engine starting in cold conditions is made easier by oils having a lower value before the W.
The number 20 in 0W-20 denotes the oil’s characteristic viscosity at high temperatures. If the vehicle is run at high speeds or with a heavy load, an oil with a higher viscosity (higher value) may be more appropriate.
What happens if you over-oil your vehicle?
It will be easier to comprehend how using too much engine oil is a bad idea if you have some background information.
Oil is necessary for optimal lubrication and smooth movement in all of the hundreds of precisely engineered pieces that operate in concert at high speeds and temperatures. The “Oil under the hood” cap on an engine is used by you or your mechanic to add oil to the crankcase. When the engine is not running, the oil collects in the oil pan. An oil filter removes impurities that can potentially cause damage as the engine is started. The oil then flows throughout the engine.
The level in the oil pan rises when too much oil is applied. This enables the crankshaft, a rapidly moving lobed rod, to make touch with the oil and basically aerate it. A foamy, frothy fluid that is unable to adequately lubricate the engine is the end consequence. Imagine this as the process your engine uses to whip cream. Nobody wants their engine to be lubricated with whipped cream.
Another issue is that the additional oil puts too much pressure inside your engine, and that pressure will try to escape through various gaskets and seals. Leaks and expensive repairs will result if any of those fail.
What is the Toyota Corolla’s liter capacity?
The 1.8-Liter 4-cylinder engine in the Toyota Corolla LE, L, and XLE generates 139 horsepower. The 1.8L 4-cylinder in the Hybrid LE variant is also equipped with intelligent variable valve timing and produces 121 horsepower.
Is 2010 going to be good for Corolla?
The 2010 Toyota Corolla isn’t as fanciful or fashionable as some of its rivals, but its high fuel efficiency ratings and plush front seats make it a serious compact car contender.