The oil capacity of your 2008 Toyota Tundra relies on the engine it has. The oil volume with a filter for the 2008 Toyota Tundra is as follows, based on engine types: 4.8 quarts, 4.0L 6-cylinder, engine code 1GR-FE Z. 4.7L 8-cylinder, 2UZ-FE 9 engine code, 6.6 quarts.
In This Article...
What type of oil will fit a 5.7 tundra?
All of Toyota’s vehicles are advised to use a certain brand of oil. The Toyota Genuine Motor Oil is the name of this brand, which is produced by Mobil. The most popular weights in this brand for engines using synthetic oil are 0w-20, 5w-30, 10w-30, and 5w-20.
According to the Toyota owner’s manual, SAE 0w-20 is the ideal weight for the Toyota Tundra and should be used in that vehicle. You can use SAE 5w-20 if this isn’t available, though. At the subsequent oil change, make sure to change it back to the 0w-20 weight.
Your Tundra’s age, how many miles you’ve driven it, and the temperature where you drive will all affect how much oil you consume.
How frequently should I have my Toyota Tundra’s oil changed?
For traditional oil, Toyota advises changing your 2020 Toyota Tundra’s oil and filter every 3,000 to 5,000 miles. Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles. Remember that the best way to choose the intervals for your car is to consult your owner’s handbook and your dealer.
How is the oil changed in a Toyota Tundra from 2008?
No parts are mentioned.
- Step 1: Take the skid plate off. Locate the skid plate first.
- Step 2: Continued Removal of the Skid Plate
- 3. Open the system.
- Draining the Oil in Step 4.
- Reattaching the Oil Drain Plug in Step 5.
- Remove the oil filter cap in step six.
- 7. Draining the oil filter.
- Step 8: Replace the oil filter after removing it.
Is 0W20 preferable to 5W20?
The Society of Automotive Engineers assigned these oils a viscosity grade, which is a numerical value (SAE). The numbers before and after the W denote the oil weight in cold and warm temperature settings, respectively, while the W stands for “Winter.”
These motor oils both have a comparable, wide working temperature range, and are typically used as winter viscosity oils.
On closer investigation, you will see a few slight variations:
A. Cold Viscosity
The ability of an oil to flow is measured by its viscosity. It also describes the thickness of the oil at various temperature levels.
When operating in freezing temperatures, 0W-20 motor oil performs like an SAE 0W weight oil. While 5W-20 oil functions as an SAE 5W weight oil.
The better the motor oil performs at low temperatures, according to SAE nomenclature, the lower the number before the ‘W’ is. Since 0W20 is much thinner than 5W-20, it is more stable at low temperatures and flows easily through the essential engine components.
A more suitable oil for a typical operating temperature range of -22F to 68F is 5W-20, which has a viscosity that is relatively thicker.
B. Hot Viscosity
At higher temperatures, both oils behave as SAE 20 weight oils. They offer reasonable fuel consumption, improving fuel efficiency while lubricating all of your important engine components.
Both of these grades perform well up to 68 F in terms of their operational temperature range. Under circumstances of high oil pressure and higher temperatures, they are resistant to issues like oil burning and excessive oil consumption.
C. Performance
The thinner oil grades 0W-20 and 5W-20 both work best in cold winter climes.
The 0W-20 oil grade performs better with cold starts due to its reduced viscosity. Additionally, it guards against issues including varnish buildup, engine wear, sludge formation, and low oil pressure. With 0W-20, you may anticipate faster oil circulation and a smoother flow.
Therefore, 0W-20 oil grade would be the best choice for you if you plan to travel frequently in regions with below-freezing temperatures and infrequently in regions with higher temperatures.
However, 5W-20 performs a little bit better in seasonal climates due to its higher viscosity. Because of its somewhat greater thickness, it resists oil thinning at higher temperatures better.
There are some vehicles that can use both 0W-20 and 5W-20 oil. However, consult with your mechanic regarding the suggested oil for your vehicle before switching to a different viscosity grade.
D. Fuel Economy
The mileage and fuel efficiency of both 0W-20 and 5W-20 oil are essentially the same.
Due to its thinner oil flow and low viscosity, 0W-20 oil may provide you somewhat improved fuel efficiency and less carbon emissions.
The type of motor oil you useconventional, synthetic blend, or totally syntheticalso makes a difference. The 0W-20 and 5W-20 motor oils are fully synthetic and will provide the best possible fuel economy.
E. Pricing
Typically, 0W-20 oil costs a little bit more than 5W-20 oil. This is due to the fact that it is more stable than the latter due to being a full or semi synthetic oil.
Your engine oil’s cost varies from provider to seller as well. To choose the most economical alternative for your car, be sure to consult your mechanic!
What are some things you need to understand about these multigrade oils keeping these in mind?
What volume of liquid does a 2008 Tundra hold?
The oil volume with a filter for the 2008 Toyota Tundra is as follows, based on engine types: 4.8 quarts, 4.0L 6-cylinder, engine code 1GR-FE Z. 4.7L 8-cylinder, 2UZ-FE 9 engine code, 6.6 quarts. 7.4 quarts, 5.7L 8-cylinder, engine code 3UR-FE 5.
When should I replace my synthetic oil?
Synthetic oil is more refined than ordinary auto oil, which can cut friction, lessen engine sludge, and improve engine performance. Depending on the vehicle and the brand of synthetic oil used, it is advised to replace the oil every 7,500 to 15,000 miles.
What kind of oil is recommended for a Toyota Tundra?
The greatest option for high fuel efficiency and starting in cold conditions is 0W-20. In the absence of 0W-20, 5W-20 may be utilized. However, the following oil change requires that it be swapped out with 0W-20.