Filtered, 3.9 quarts Check the oil level after refueling.
In This Article...
The amount of oil a Toyota Corolla uses.
Follow these instructions to replace the oil:
- Look for the drain oil plug by climbing underneath the Corolla. It is located beneath the engine.
- Slide the drain plug with the oil collection container underneath. The drain plug should be loosened using a socket wrench and a 14-mm socket.
- You can fully loosen and remove the plug to hasten the procedure by waiting until the oil begins to drain from the engine.
- Once the oil is finished, you must find the oil filter.
- Remove the oil filter using a socket wrench or other removal tool and an oil filter socket.
- Wait until all extra oil has finished draining before emptying the oil from the filter into the pan.
- Clean the area surrounding the oil filter fitting on the engine block using a rag.
- Then, take a clean rag and dab some fresh oil on it. Wipe the new oil filter’s edges clean with this oil.
- Reverse the removal instructions to install the new oil filter.
- Reinstall the drain plug and make sure not to overtighten it while doing so.
- The oil cap is located on top of the engine when the hood is opened. Add 3 to 4 liters of fresh oil. Take your time when adding fresh oil to prevent spills and/or overfilling.
- Check the dipstick after you’ve filled it to make sure you have the right amount of oil.
The maintenance light needs to be reset, last but not least. Turn the key to the accessory (ACC) position to accomplish that. Turn off the key after setting the odometer to mileage rather than trip. As you turn the key back to ACC, press and hold the button you used to switch to trip. While you press and hold the button, the light ought to blink.
Describe SAE 5w30.
A popular motor oil for light-duty gasoline and diesel engines is 5w30. 5w30 is a multi-grade oil, like the majority of modern motor oils, ranging from a lower viscosity grade of 5 to a higher viscosity grade of 30.
The “W” stands for “winter; the number before it denotes the thickness or viscosity of the oil at low temperatures (thus the “W”); the number following it denotes the thickness or viscosity of the oil at higher temperatures, when the engine is operating.
Can I use 10W 40 for 5W 30?
5W-30 oil is not used in your car. According to Kia literature, 10W-40 oil viscosity is advised for your car. You can use 5W-30 oil if the outside temperature is considerably below 32 degrees when you are driving the car, but you can also use 10W-40 if the outside temperature is below freezing. Requesting an engine oil/filter change will have the answering mechanic take care of this for you if you prefer that this maintenance be done by a qualified Mechanic sent directly to your location by YourMechanic. Do not hesitate to get in touch with YourMechanic again if you have any more queries or worries.
How much oil should a 2003 Toyota Corolla have?
Save time, money, and expensive auto repairs by doing them yourself! Amsoil is there for you! Make the engine in your Corolla bulletproof!
Filtered, 4.4 quarts The capacity displayed is when used with the most recent dipstick, P/N 15301-22050. The capacity is 0.5L (0.5 quarts) less with the original dipstick P/N 15301-22030 fitted.