For your 2002 Toyota Camry, we now offer 9 Starter items to select from, with prices ranging from $116.99 to $339.99.
In This Article...
How much does a starter replacement for a 2002 Toyota Camry cost?
Best in Automotive Repair Replacement starters for Toyota Camrys typically cost between $333 and $500. While parts are priced between $224 and $364, labor is predicted to cost between $108 and $136.
How much does a Toyota Camry starter replacement cost?
The normal price range for a starter replacement is $440 to $551. Between $112 and $141 can be spent on labor, while between $307 and $410 can be spent on parts.
Why won’t my Toyota Camry start?
There are a few causes of Toyota Camry non-starters. The top five causes, according to VEHQ, include a dead battery, a faulty alternator, a damaged ignition switch, a clogged fuel filter, or a low gasoline level. Of course, a quick glance at the fuel gauge will eliminate the final problem.
How do you tell whether a car starter needs to be replaced?
Still, keep an eye out for these seven indications that your starter is failing.
- #1: The Engine Won’t Start.
- #2: Loud, grinding, or whirring noise.
- #3: Occasional Trouble Starting the Car.
- #4: The Starter Continues After the Start.
- #5: Smoke.
- #6: The starter engages but the engine won’t turn over.
- 7. Battery
How much does an Autozone starter cost?
Starting at $50 up to $350, rebuilding parts for a starter can be expensive. A new starter might cost anything between $80 and $350. You should budget between $150 to more than $1,100 for a trained mechanic to replace or rebuild your starter.
What results in the starter failing?
If you turn the key and are greeted by the clunk of the starting engaging but the motor doesn’t turn, there are a variety of possibilities, assuming your battery is healthy and properly charged. An electrical connection that is loose or rusted is the most straightforward source of this kind of failure.
The starter motor may lack the torque necessary to crank the engine if it has internal winding issues, worn-out brushes, or other electrical issues. Mechanical problems, such as worn-out starter bearings or ring gear teeth that are no longer meshing, are another possibility. When you turn the key, you could simply hear a click or thunk.
What should you do?
- The electrical connections between the starter, battery, ground, and, if it is situated remotely, the solenoid, must be examined. If all of those are tidy and tight and none of the cables appear to have interior corrosion…
- Test the starter’s functionality without the engine running by removing it. A mechanically flawed starter will create unpleasant noises when it is spun up without being connected to anything. If it spins easily when not in use and the car’s connections are all sound, it’s likely that the windings or brushes are defective.
Starter motor turns but doesn’t turn the motor
The ring gear on the flywheel is not always engaged by the pinion gear of a starter motor. Instead, using a component known as the Bendix, which is essentially a large magnetic, the starter forces the smaller gear out to interact with the flywheel. This caused the pinion gear to extend and make contact with the flywheel. When you turn the key, you might hear a grinding or whirling sound.
- The starter needs to be examined in order to check numerous items. The starter’s tightness with respect to the motor or transmission is the first consideration. Bolts are prone to coming loose, and even little movements can prevent the gears from meshing properly.
- The starter gear or ring gear teeth may be damaged, which is another potential problem. If there are good and bad locations on the gear and occasionally it doesn’t mesh, this is frequently indicated if the issue only infrequently occurs.
- Finally, if the starter’s Bendix component malfunctions, the smaller gear may not be forced out with enough force to fully engage.
Solution: It still functions to some extent because the starter motor turns. Typically, there is a mechanical problem here. A starter motor expert should be able to rebuild the device and swap out any worn Bendix components. However, repairing a damaged flywheel ring gear will require taking the gearbox apart.
Can I change a starter on my own?
The majority of people believe that if their automobile won’t start, the battery is to blame. They attempt to boost it, but it still won’t turn on. Obviously, it’s a beginner or something little more severe. The alternator receives a charge from the battery of the car through the starter. The alternator’s charge makes it possible for the car to start. The car is dead if the starter is worn out since it won’t accept or send a charge. A repaired starter is just as effective as a new one and is less expensive than buying a new one, which is pretty pricey [source: Allen]. Save money by replacing the starter yourself if it is the true source of the issue. How to change an automobile starter is as follows:
- In order to disconnect the negative battery cable from the battery, turn off the ignition.
- From the starter, unplug the positive cablethe substantial cable that connects to the battery.
- Using a ratchet, unplug each of the bolts holding the starter to the block.
- Any additional mounting brackets keeping the starter in place should be removed.
- The starter’s bolts must all be removed. Bolts that are difficult to remove or extremely tight should not be forced. Instead, use oil or lubricant to aid in removing the bolt.
- Take the starter out of the vehicle.
- The new starter should be mounted on the block and fastened with bolts. Reconnect the battery cable to the starter before tightening the bolts.
How much should a starting replacement cost?
A brand-new starter might run you $50 to 350, and labor from a skilled mechanic could cost you $150 to 1,100. A poor starting motor replacement could cost anything from $200 to $1450 overall.
These numbers, however, can be lower if you can spot problems with the car starting at an early stage. By purchasing a rebuilt starter rather than a new one, you could also save a lot of money.
If the starter of your car suddenly stops working, you could also have to pay to have it towed to a shop unless you can arrange for a mobile technician to come to your house instead.
Let’s look at the variables that affect these pricing estimations now that you have a general idea of the average starter replacement cost.
What would prevent a Toyota from starting?
If the starting is spinning and you are getting power, the fuel system may be the source of the issue.
Power Connections
There are numerous electrical connections in your fuel injection system. They are joined at the top, on the cylinder heads, and on the intake airside. Check it whether there is a connection.
Pump and Relay for Fuel
If you have the necessary equipment, test your fuel system under pressure. Check all the electrical connections to the fuel pump with a circuit tester. On by turning the key. If there is a current, the pump is not the problem. Verify the fuse if there is no current. Replace the gasoline pump relay if the fuse is functioning properly. (This article has further information about replacing the fuel pump.)
Engine Filter
The fuel filter could be clogged even if the fuel pump is functioning. Replacing it if it’s clogged should be a part of your maintenance schedule. (This article has further information on gasoline filters.)
You can carry out each of these recommendations in your driveway at home. With the right tools, you can conduct more thorough tests.
- Starter Make sure your starter is bolted down because it can be loose.
- Poor injectors can prevent the engine from starting.
- Valve for Cold Start
- Your automobile may not start if the cold start valve is damaged and the engine is cold.
- Ring gear or a flywheel
- Your car may not start if these gears have worn teeth. When they are involved, they will shriek.
- A MAF or ECU
- The computer in your automobile can be broken. You must contact your dealership for help if that is the situation.
While any one of these elements is typically the cause of a car not starting, you can encounter a circumstance where it is outside the purview of these problems. If you have performed all the necessary inspections and the vehicle still won’t start, you might need to speak with your nearby Toyota dealership.
What does the Toyota Camry check charging system mean?
When this light illuminates, it indicates that the car is only powered by its batteries. The battery won’t be able to recharge and will eventually run out, leaving you with a dead battery if the issue persists and your charging mechanism fails. Nothing can ruin a day more than a dead battery, so if this light appears, it’s time to take your car to an experienced mechanic who can identify the issue.
Please be aware that your car may have a check charging system light or a battery light, depending on the model. To find out what warning lights your car has, consult your owner’s manual.
Can a car with a bad starter be jump-started?
Although a car with a defective starter can be jump started, the underlying problem will not be resolved. Your car’s battery is what gets boosted by a jump start, not the starter.
While a jump start can help the starter acquire the extra power it needs to start your engine because the starter is powered by the battery through a relay, it is not certain that a jump start will be helpful if the problem is with the starter.
For a proper diagnosis and solution to the problem, you are best off visiting a mechanic. Jumping your car every morning is not a workable approach, regardless of the circumstance!
A reliable strategy to make sure you’re taking good care of your set of wheels is to take it to the mechanic, along with giving it a robust vehicle insurance coverage.
In less than a minute, Jerry will produce comparable quotes from leading providers if you’re looking for auto insurance.
Something sounds off.
When you turn the key or press the start button, there may be a clicking sound, which is one of the signs of a defective starter. However, a starting can stop working altogether or make noises that signal its approaching demise, such as buzzing and grinding. Oh, listen!
You’ve got lights but no action.
You may have a problem with the starter if you try to start the engine and the dashboard illuminates but nothing happens to the engine.
Your engine won’t crank.
Even after attempting a jumpstart, does your engine still not start? At this point, you should dial a towing service and drive your vehicle to the closest Firestone Complete Auto Care. Nothing else than a qualified technician will start your engine if a jumpstart doesn’t work.
Smoke is coming from your car.
The starter is a component of your car’s electrical system and is vulnerable to short circuits and blown fuses. Your car’s starter may overheat if you’ve been trying to start it for a long time, which increases the likelihood of electrical problems and the accompanying smoke. Call for assistance if you see or smell smoke instead of twisting the key more.
Oil has soaked the starter.
If your vehicle has rear-wheel drive, the starter is often located on the passenger side of the engine, directly below the exhaust manifold. If it is a front-wheel-drive vehicle, look above the transmission on the driver’s side or under the exhaust manifold. On some automobiles, they may also be found just beneath the intake manifold. If you open the hood to discover that your starter is covered in engine oil, your broken starter may be a sign of an oil leak, which is another issue. Keep an eye out for oil leaks to prevent starter problems of this sort because, regrettably, what begins as a few droplets of oil can steadily and often unnoticeably evolve into a costly problem.