This pickup truck comes in trims with beds ranging in size from 67.2 to 97.2. The Limited trim offers a 78.7-inch bed length compared to the SR5 CrewMax’s 66.7-inch bed. The bed depth and wheelbase of every 2021 Toyota Tundra trim are 22.2 and 145.7, respectively.
In This Article...
Tundra Double Cab Interior Dimensions
- 41.0 inches of front headroom
- 38.5 inches of rear headroom
- 41.2 inches of front legroom
- 33.3 inches of rear legroom
- Back Shoulder Space
- 6.5 inches
- 63.4 inches of rear shoulder room
- 62.6 inches of front hip room
- Back Hip Space
- 614 inches
Toyota Tundra Bed Lengths and Dimensions
Any pickup truck’s greatest asset is its utility, and the 2022 Toyota Tundra won’t let you down with a selection of three different bed lengths: a 6.5-foot regular bed, an 8.1-foot extended bed, and a 5.5-foot short bed. 20.9 inches deep, 58.7 inches broad, and 48.7 inches wide between the wheel wells are the dimensions of the Toyota Tundra truck beds. For drivers who require additional space for freight on the back end, Tundra Double Cab models are available with the 6.5-foot standard bed and the 8.1-foot extended bed, both of which have a maximum payload of 1,940 pounds. The 6.5-foot regular bed and the 5.5-foot short bed on the Toyota Tundra CrewMax Cab models each have a maximum payload capacity of 1,830 pounds.
How long is the truck bed on the Toyota Tundra?
This pickup truck comes in trims with beds ranging in size from 67.2 to 97.2. The Limited trim has a 78.7-inch bed length compared to the SR5 CrewMax’s 66.7-inch bed. The bed depth and wheelbase of every 2021 Toyota Tundra model are 22.2 and 145.7, respectively.
What distinguishes the Tundra CrewMax from the Double Cab?
The Toyota Tundra’s Double Cab and CrewMax models differ primarily in that the Double Cab has less space in the back seat. The occupants in the backseat have 8.3 less inches of legroom.
Both vehicles can hold 5 passengers and have 2 sets of fully functional doors. However, the Double Cab’s back doors are a little bit smaller.
The back doors on the Double Cab are smaller than those on the CrewMax, as seen in the image above.
They significantly improved the design over earlier iterations and included conventional handles as opposed to more recessed and difficult-to-use ones (like in the 2021 model below).
Since I don’t personally own this truck, the video below does an excellent job of demonstrating how the two cab sizes differ.
A Toyota Tundra Double Cab with a 6.5-foot bed measures how long?
You will have two available cab options from which to choose to design your appearance.
Drivers have the option of starting with a conventional Double Cab, which has two large doors up front and two smaller doors behind.
Four full-size doors will be accessible if you decide to upgrade your car to the CrewMax cab, allowing your passengers convenient access to the back seats. For drivers who wish to go to a job site with their entire family or as a group, this is a fantastic alternative.
The basic Double Cab has an overall length of 228.9 inches and a 6.5-foot cargo bed, which drivers can use. This gives you great parking flexibility and still leaves plenty of room in the cargo bed.
How long is the bed of a Tundra CrewMax with the tailgate is down?
You can transfer huge objects without renting a larger vehicle if you have a truck. There are numerous automakers who produce vehicles in various configurations. The length of the bed supports this. Depending on the model level you choose, there are three distinct bed lengths for the Toyota Tundra. The many sizes that you may anticipate to locate for this particular truck have been investigated and compiled by us.
There are three alternative bed lengths available for the Toyota Tundra: 5.5 feet, 6.5 feet, or 8.1 feet. There is only one 5.5-foot bed option for the CrewMax. The beds on Tundra Double Cabs can be 6.5 feet or 8.1 feet long.
Learn more about the bed lengths for previous Tundra models, the distinctions between the Crewmax and Double Cab trims, and which trims provide each length by reading on.
Truck beds are measured in what ways?
To ensure appropriate installation, measurements of your truck bed are necessary for accessories like truck bed covers, bed liners, and some nerf bars. To estimate the size of your truck bed, simply follow these easy instructions:
Extend the measuring tape from the inner border of your bed rail to the top of your tailgate. Keep a record of the inch measurement.
To find the length of your truck bed in feet, divide the number of inches by 12. Your bed’s length, in feet and remaining inches, is 5’8″.
Is there a Toyota Tundra with an 8 foot bed?
Three different bed lengths are available for the Tundra: 8 foot 1 inch, 6 foot 6 inch, and 5 foot 6 inch. Not all cab configurations come with every bed option.
How long is a crew cab full-size truck?
The lengths of the top ten most popular pickup trucks range from 209.1 to 252.2 inches. This translates to 17.5.120.
The mid-size trucks only span a width of 210.7 to 224.9 inches, but full-size trucks span the entire range.
The Ford F150 (2021), which has a conventional cab and a 6.5-foot truck bed, was the shortest truck discovered.
The Toyota Tundra (2022) double cab with an 8.1-foot truck bed was the longest vehicle.
A 6.5 foot bed is available on what trucks?
Making a decision on a new truck is difficult; there are many factors to take into account before handing over your hard-earned money at the showroom. To get the most out of your purchase, size is the most important factor to take into account, both for passengers and for towing. With our selection of available 4-door full-size and mid-size trucks with long beds, we’ve got you covered so you may have the best of both worlds.
Long-bed 4-door vehicles include:
- Supercrew Lariat Ford F-150
- F-150 XLT Supercrew by Ford
- Lariat Ford Super Duty F-250
- Silverado 1500 LT Trail Boss 4WD from Chevrolet
- Chevrolet Silverado HD 2500
- Chevrolet Silverado HD 3500
- Crew Cab Dodge Ram Tradesman
- GMC Sierra Height
- XD Nissan Titan
Mid-sized pickups:
- Ranger Supercrew Ford
- Crew Cab Chevy Colorado LT
- Tacoma SR5 Double Cab Toyota
- Crew Cab Long Bed Nissan Frontier SV
- SLE 4WD Crew Cab Long Bed GMC Canyon
- Subaru Ridgeline
- Gladiator Jeep
Wow! That is a lengthy list. We’re just getting started, so we hope you’re fired up and ready for more. The next section will provide a thorough breakdown of bed lengths, second-row legroom, and overall length as well as information on which trucks have the longest beds and the most second-row legroom.
How long is the bed of my truck?
A pickup truck is a one-of-a-kind vehicle with unparalleled adaptability because to its truck bed. A pickup truck bed is helpful for a variety of situations, whether you want to assist a friend with a move or store tools when you go camping on the weekends.
It’s crucial to evaluate your vehicle bed and comprehend its load capacity before organizing your weekend camping trip or purchasing a new sectional. Bed rails, truck bed covers, and tool boxes are examples of truck attachments that need certain dimensions in order to be installed correctly. You don’t want to spend money on a tonneau cover just to discover that your particular truck bed length prevents it from fitting.
If you want to make the most of your pickup truck, we’ve put together a straightforward, easy-to-follow instruction on how to measure a truck bed.
The distance from one inner sidewall to the other inside sidewall of a truck bed determines the width of the bed. If you want to haul broad products or buy a crossover tool box, it’s crucial to measure the width of your bed.
Grab a measuring tape that reaches more than 10 feet to start. Take note of the number of inches displayed after positioning the tape measure so that it fits between each side wall. Always check to see that the tape measure is balanced, straight, and not bent.
Now is the moment to determine the length of your bed. The distance between the inside of the bulkhead and the interior of your tailgate determines the length of a truck bed.
Make sure your tailgate is up and that you have your tape measure on ready. Place the tape measure in the space between your tailgate and the interior of the bulkhead. Note the number of inches displayed.
Make sure the tape measure is straight this time and not crooked. Don’t include the truck’s exterior in your calculations.
Divide your breadth by your length to find the square footage of your bed space. The area of the truck would be 60 x 80 = 4800 inches, for instance, if your truck bed is 60 inches wide and 80 inches long (400 sq. ft.).
You might have noticed that your truck bed’s real length is different from the length listed for your car model. This does not imply that you are a terrible measurer. The actual bed length frequently varies somewhat from the advertised length.
Look through the following table for some typical deviations:
Was this article useful to you? View our additional advice and knowledge for pickup vehicle owners here: