Your Toyota’s timing belt is crucial to its proper operation. The valves can open and let air into the engine at the appropriate time because to its connection between the crankshaft and the two camshafts. The engine won’t start properly if the timing of the airflow in your engine is not exact.
Comparatively speaking to their timing chain cousins, timing belts are renowned to operate more softly. Although not as durable or strong as chains, belts are significantly less expensive and typically simpler to replace. On the other hand, if you delay in replacing your timing chain, it could seriously harm your engine.
Is there a timing chain or belt on your Toyota car? To determine which is in your car, look at this detailed chart:
In This Article...
Maintaining your timing belt
Timing belt inspections and replacements should take place at specific intervals during the life of your car as specified in your Warranty and Maintenance Guide, depending on your model.
Many drivers find that having the timing belt replaced rather than having it examined is more cost-effective because the inspection fee is frequently close to the cost of having the entire system replaced. For the majority of mechanics, this is a rather simple and inexpensive fix. Depending on how fast your car is moving, if the belt snaps while you’re driving, your engine can sustain serious harm. In general, the faster you go, the more harm your engine will take.
Are there timing chains or belts on Toyotas?
Timing chains are more enduring and last a lot longer even if they are heavier than belts. The 2020 Toyota Corolla, 2020 Toyota RAV4, and even the 2020 Toyota Yaris all have timing chains rather than timing belts as standard equipment. Timing belts, however, might still be present in some older Toyota vehicles.
Which Toyota models use timing chains?
So, that is how the timing chain and belt operate. Which one, though, does your Toyota use? Here is a quick list of the components used in the engines of various Toyota vehicles:
Sedan And Hatchback Models
- All Avalon models from 1995 to 2004 feature timing belts. Timing chains are used in the vehicles from 2005 through 2020, including the 4-cylinder Avalon Hybrid.
- Toyota Camry: The timing belt is used in all models from 1990 to 2001 as well as the V6 model from 2004 to 2006. The timing chain is utilized by the 20022020 4-cylinder and 20072020 V6 vehicles.
- Toyota’s well-known Corolla compact vehicle has a timing belt from 1990 to 1997. Timing chains, however, were introduced in models starting in 1998. The Corolla Hybrid and Corolla iM/Scion iM models are included in this.
- Cressida: The straight-six engine of the Toyota Cressida from 1990 to 1992 had timing belts.
- This subcompact’s timing chain-powered 4-cylinder engine was sold from 2000 to 2005.
- Timing chain for all models, 20032013, shown as a matrix.
- Timing belt for all Paseo models from 1992 to 1997.
- Prius: From 2001 to the most recent models, all Prius models share the same timing chain. The Prius C, Prius V, Prius Prime, and Prius Plug-in are all included in this.
- All Tercel models produced between 1990 and 1998 had engines with timing chains.
- Timing chains are used in all Yaris vehicles produced from 2007 through 2020, including the Scion iA and Hatchback variants.
Crossover Models
- Toyota’s C-HR is a brand-new compact crossover with a strong emphasis on lifestyle.
- Timing chains are used in all 4-cylinder engines in the Highlander from 2001 to 2007; timing belts are used in V6 vehicles. From 2008 through 2019, timing chains are used in all V6 vehicles. Except for the V6 hybrid, it employs timing belts from 2006 to 2010 and timing chains starting with the 2011 model year.
- RAV4: From 1996 to 2000, all 4-cylinder models of the RAV4 used timing belts; starting in 2001, timing chains were used. Timing chains are also used in the V6 version from 2006 to 2012. Timing chains are used in the hybrid cars from 2016 to 2020.
- Venza: The timing chain for the Venza ranges from 2009 to 2015.
Minivan Or MPV Models
- Timing chains were employed in the engines of this storied Toyota minivan from 1991 to 1997.
- The Sienna sports a V6 engine with timing belts and was manufactured from 1998 to 2006. The V6 vehicles from 2007 through 2020 then employ timing chains. Timing chains are used in the 4-cylinder variant from 20112012.
SUV And Trucks
- 4Runner: Timing chains are used in the four-cylinder 199020002010 4Runner. Timing belts are used on the 19902002 vehicles for the V6 variations. Timing chains are then used for the 4Runner’s V6 engines from 2003 to 2010. If your engine is a V8 model (20032009), a timing belt is used.
- FJ-Cruiser: This mid-size SUV with classic styling was sold from 2007 to 2014. They were all powered by V6 engines with timing chains.
- The Land Cruiser offers a wide range of engine configurations. The gear drive system is used with the 19901992 straight-six engine (the same function, but uses a set of gears rather than belts or chains). Timing chains are used in the 19931997 straight-six engine. The V8 models from 1998 to 2007 make use of timing belts. While the V8 versions from 20082011 and from 20132020 employ timing chains.
- 20012009 4.7L V8 Sequoia Timing belts are used in Sequoia. Timing chains are used in both the 20102012 4.6L V8 and the 20082020 5.7L V8 models.
- Toyota T100: Timing belt for the 19931998 V6 engines and timing chains for the 19951998 4-cylinder engines
- Toyota Tacoma: The Toyota Tacoma and the 4Runner share the same base, but the engines are different. Timing chains are used on all 4-cylinder vehicles from 1995 to 2020. Timing belts were used on V6 vehicles up until 2004, however starting with the 2005 model, they were replaced by timing belts.
- Toyota Truck: Timing belt for 19901995 V6 engines and timing chains for 19901995 4-cylinder engines.
How long do Toyota’s timing belts last?
Although they can last up to 100,000 miles, it’s always a good idea to change them before that. The valves, pistons, and other internal engine components can sustain significant damage in the event of a belt failure.
Should Toyota timing chains be changed?
While everyone is aware that a car’s timing belt needs to be replaced at suggested service intervals, what about the timing chain? What distinguishes a timing belt from a chain? A timing belt is a toothed belt that travels outside of the engine and is constructed of high-quality rubber. It is protected by a cover.
A bicycle chain-like timing chain is constructed of metal. Because it requires engine oil for lubrication, a timing chain operates inside the engine. Depending on the vehicle, a timing belt normally needs to be replaced between 40,000 and 100,000 kilometers. The fix costs a few hundred dollars. It is not necessary to replace a timing chain unless there is an issue with it.
Does the timing chain have a mechanical immunity? No, it is not, is the clear-cut response. Timing chain issues are prevalent, particularly in automobiles with heavy mileage.
A timing chain can wear out just like any other moving mechanical part within an engine. The engine oil lubricates a timing chain. The timing chain can wear down more quickly due to insufficient oil changes, low oil levels, or bad oil quality.
A chain tensioner maintains the correct tension on a timing chain. An oil pressure or spring-loaded device could be used to run a chain tensioner.
Timing chains: how long do they last?
When should a timing chain be changed? Unless there is a specific issue, the timing chain typically needs to be replaced between 80,000 and 120,000 miles. In automobiles with higher mileage, chain problems are frequent.
Is there a timing belt or chain on a 2012 Toyota?
AutoTrader: The 2.5-liter inline 4-cylinder and 3.5-liter V6 engines in the 2012 Toyota Camry use timing chains rather than belts. This is critical since a rubber timing belt must typically be replaced every 75,000 to 90,000 miles, necessitating a high mechanic charge.
Which motors include timing chains?
The timing chain, which is found in the engine of the car, synchronizes the various components so they can operate together. It is constructed of metal links that function as a chain to transfer the crankshaft’s motions to the camshaft. This enables it to grasp onto the various wheels and gears.
Depending on the model of your car, the timing chain may be a single, double, or triple chain. A hydraulic tensioner is present to keep it tight.
Timing chain vs timing belt
As previously mentioned, the timing chain is utilized to coordinate the motion of some engine components. The timing belt and this are comparable. The timing belt’s ability to power the water pump on some automobile types may be the only distinction. Other than this, synchronizing the crankshaft, camshaft, pistons, and valves is essentially their shared responsibility.
Timing belt or chain: Which is better?
- The timing chain’s key strength is how durable it is. Due to its high strength, it should typically not need to be replaced and should last the whole life of the vehicle.
- A timing chain only needs to be checked every 125,000 miles of use. Otherwise, it requires no maintenance.
- The metal in the timing chain is resistant to temperature changes, in contrast to the rubber that makes up the timing belt.
- A timing chain weighs more than a belt, which increases fuel consumption (and the pollutants it causes), which over time reduces fuel efficiency. Additionally, its weight affects engine output.
- Timing belts are much quieter than running timing chains.
- It is typically only feasible to equip big cylinders due to its weight.
- It costs a lot more to buy than a timing belt would.
- Because the timing chain is constructed of metal links, engine oil must be used to lubricate it continually.
What cars have timing chains instead of belts?
Timing chains are being installed in more and more vehicles. The majority of Mercedes and BMW vehicles come with timing chains.
A non-exhaustive list of vehicles that can have timing chains installed is provided below:
- many BMWs
- a lot of Mercedes
- Every Cadillac
- 159 Alfa Romeo
- Corvette by Chevrolet
- Duster, Sandero, and Sandero Stepway from Dacia
- Jazz Honda
- Skyactiv-G engine in Mazda
- Every SAAB has a turbocharged engine.
You may physically inspect your car’s timing belt or chain by removing a cover at the end of the engine, consulting your owner’s manual, or asking your mechanic. The timing chain is easily identified by its metal links when the cover is removed with the proper tool, whereas the belt is comprised of rubber and is considerably more flexible.
Ask your mechanic: “How do I tell whether my automobile has a timing belt or chain? if you are still unclear.
You won’t typically need to replace your car’s timing chain. Poor lubrication is likely to have ruined a chain that has to be replaced.
If the timing chain is determined to be damaged, it’s critical that you hire a reputable expert to handle the repair. In extreme cases, the mechanic will even need to completely remove the engine to get to the timing chain. If the timing chain breaks, it may harm other engine components like the valves, making the repair more involved and pricey.
How much does a timing chain replacement cost?
Being proactive is a good thing because an engine that has a broken timing chain could suffer significant damage.
Timing chain replacement might cost between $600 and $800 to do it yourself or $1,600 to $1,800 to have a technician do it. Due to how difficult it is to replace this element, the price is exorbitant.
The parts for a DIY timing chain replacement will run you about $650. But this is a job that’s best left to mechanics with a lot of experience.
Fortunately, timing chains are built to endure the lifespan of the vehicle, unlike rubber timing belts, thus it is rare that you will need to have it changed. Watch out for these signs if you think your timing chain may be broken:
- Noisy timing chain
- Starting the car is challenging.
- While idling, the engine shakes or vibrates
- Engine has poor performance or is misfiring
- The check engine light is on.
Bring your car to a repair as soon as you can if any of these symptoms persist. Quickly addressing the problem will stop further harm to your car.
Save money on other auto expenses, such as car insurance with Jerry, to make place in your budget for unforeseen auto repairs. In just a few seconds, the Jerry app can quickly scan rates from more than 50 of the best insurance providers, including Travelers, Nationwide, and Progressive! Once you’ve decided, they even assist you in canceling your old coverage.
With Jerry’s assistance, you may uncover $887 in annual savings on auto insurance and save time!
Do all automobiles have a timing chain or belt?
Now, timing belts are not a feature on all vehicles. Timing chains may be present. As the name suggests, they carry out the task using a chain rather than a belt. In the past, timing chains, which are incredibly durable, were employed in the majority of engines.
What does a new timing belt cost?
The engine of your car cannot function without a timing belt. Timing belt preventative maintenance is far less expensive than waiting for it to break. O’Leary’s Automotive provides skilled mechanics who can assist if you need high-quality timing belt repair in Wilmington, North Carolina.
The camshaft and the crankshaft are two different types of shafts found in your engine. These shafts are made to start the engine cycle and deliver torque while controlling the pistons in the engines. The camshaft and crankshaft are controlled by grooves or teeth on the timing belt. This makes it possible for the engine valves to open and close precisely when necessary for efficient operation.
Timing belts comprised of chains and gears are used in some automobiles. Although these timing belts are more resilient, they need lubrication to function. The timing belts in many modern automobiles are comprised of a rubber composition. These timing belts tend to wear out more quickly but are quieter and more energy-efficient.
Warning Signs a Timing Belt Replacement is Needed
The majority of timing belts require replacement every 60,000 to 90,000 miles. Because it is crucial to the engine’s functionality, the timing belt acts inside the engine. Don’t put off changing the belt until it breaks. Your engine won’t start if your timing belt breaks.
You might observe one or more of the following if your timing belt is broken or worn out:
- Rumbling or rough idling coming from the engine
- engine stalls
- the engine’s smoke
- lower oil pressure
- damaged pistons or valves
Timing Belt Repair & Quality Auto Repair in Wilmington, NC
It is best to have a qualified, quality auto repair technician evaluate your car as soon as possible if you have encountered one or more of the aforementioned symptoms. Expect to pay between $300 and $500 for the service if your timing belt needs to be replaced. Many automobiles’ timing belts require some disassembly and reassembly since they are not always easily accessible. Smaller engines in economy cars result in less work. However, larger trucks, SUVs, or premium cars can take a lot longer.