Only Solution. Only Toyota cars (apart from 3UR-FBE Engines*) that require 0w-20 synthetic oil have been given the go-ahead for longer oil change intervals of 10,000 miles or 12 months. (You should, though, keep checking the oil level frequently and topping off as necessary.
In This Article...
How frequently should you have your 2010 Toyota Corolla’s oil changed?
You were supposed to replace your oil every three months or 3,000 miles, whichever came first, according to an old proverb. This is no longer the case, though, as engine technology has developed and become more effective. Toyota advises consumers to have their vehicle’s oil changed professionally or by themselves every six months or five thousand kilometers, whichever comes first.
Recommended Oil Viscosity for Toyota Models
Toyota owners who enjoy DIY projects might be interested in changing their own car’s oil. We endorse this course of action because it offers customers a lot more cost-effective option than even bringing their car to one of the more reasonably priced service facilities nearby. Make sure you are using the right oil if you plan to change your Toyota’s oil on your own. Naturally, as Toyota Genuine Motor Oils are created exclusively for use with Toyota engines, we advise using these. But another choice that is suitable as well is synthetic oil with a viscosity of 5W-30!
Is 0W20 preferable to 5W20?
The Society of Automotive Engineers assigned these oils a viscosity grade, which is a numerical value (SAE). The numbers before and after the W denote the oil weight in cold and warm temperature settings, respectively, while the W stands for “Winter.”
These motor oils both have a comparable, wide working temperature range, and are typically used as winter viscosity oils.
On closer investigation, you will see a few slight variations:
A. Cold Viscosity
The ability of an oil to flow is measured by its viscosity. It also describes the thickness of the oil at various temperature levels.
When operating in freezing temperatures, 0W-20 motor oil performs like an SAE 0W weight oil. While 5W-20 oil functions as an SAE 5W weight oil.
The better the motor oil performs at low temperatures, according to SAE nomenclature, the lower the number before the ‘W’ is. Since 0W20 is much thinner than 5W-20, it is more stable at low temperatures and flows easily through the essential engine components.
A more suitable oil for a typical operating temperature range of -22F to 68F is 5W-20, which has a viscosity that is relatively thicker.
B. Hot Viscosity
At higher temperatures, both oils behave as SAE 20 weight oils. They offer reasonable fuel consumption, improving fuel efficiency while lubricating all of your important engine components.
Both of these grades perform well up to 68 F in terms of their operational temperature range. Under circumstances of high oil pressure and higher temperatures, they are resistant to issues like oil burning and excessive oil consumption.
C. Performance
The thinner oil grades 0W-20 and 5W-20 both work best in cold winter climes.
The 0W-20 oil grade performs better with cold starts due to its reduced viscosity. Additionally, it guards against issues including varnish buildup, engine wear, sludge formation, and low oil pressure. With 0W-20, you may anticipate faster oil circulation and a smoother flow.
Therefore, 0W-20 oil grade would be the best choice for you if you plan to travel frequently in regions with below-freezing temperatures and infrequently in regions with higher temperatures.
However, 5W-20 performs a little bit better in seasonal climates due to its higher viscosity. Because of its somewhat greater thickness, it resists oil thinning at higher temperatures better.
There are some vehicles that can use both 0W-20 and 5W-20 oil. However, consult with your mechanic regarding the suggested oil for your vehicle before switching to a different viscosity grade.
D. Fuel Economy
The mileage and fuel efficiency of both 0W-20 and 5W-20 oil are essentially the same.
Due to its thinner oil flow and low viscosity, 0W-20 oil may provide you somewhat improved fuel efficiency and less carbon emissions.
The type of motor oil you useconventional, synthetic blend, or totally syntheticalso makes a difference. The 0W-20 and 5W-20 motor oils are fully synthetic and will provide the best possible fuel economy.
E. Pricing
Typically, 0W-20 oil costs a little bit more than 5W-20 oil. This is due to the fact that it is more stable than the latter due to being a full or semi synthetic oil.
Your engine oil’s cost varies from provider to seller as well. To choose the most economical alternative for your car, be sure to consult your mechanic!
What are some things you need to understand about these multigrade oils keeping these in mind?
Toyota started using synthetic oil when?
In the early 2010s, Toyota switched the majority of its vehicles over to entirely synthetic oil. 0-20 oil was the standard synthetic oil to use at the time. Toyota switched for a variety of reasons, including:
- There is less sludge produced by synthetic oil.
- On the interstate and in the city, synthetic oil can improve fuel economy by almost 1 mpg (depending on driver and conditions).
- The stricter EPA oil regulations are compatible with synthetic oil.
- Because synthetic oil lasts longer than regular oil, oil changes are less frequent.
- The harder driving conditions and lower temperatures can be handled with synthetic oil.
Most importantly, synthetic oil increases the longevity of your engine. Your car will function at its peak when used in conjunction with Toyota oil filters. With one straightforward switch, you may extend the lifespan of your car. In the long run, synthetic oil is preferable than regular oil.
Spend a few dollars more the next time you have your oil changed to prolong the life of your vehicle.
Does using synthetic oil matter?
Yes, synthetic oil is superior to regular oil for engines. While conventional oil, or mineral oil, can provide enough lubrication, it cannot match the overall engine protection and performance offered by synthetic oils.
When opposed to the less refined base oils used in conventional oils, synthetics use higher grade base oils, making conventional oils:
- Less stable chemically
- easier to oxidize and acidify
- faster to degrade and lose protective properties
In general, full synthetic motor oils outperform traditional and synthetic blend motor oils in terms of engine protection and performance. The sophisticated complete synthetic motor oils from Mobil 1TM are precisely developed with an additive system that offers performance advantages over conventional and synthetic blend oils by:
- preventing sludge and deposit accumulation
- safeguarding against extreme temperatures
- preventing oil deterioration
Therefore, all of the chemistry that is developed in a lab has a significant impact on the road.
What kind of oil does Toyota advise using?
In addition to preventing corrosion and lumping, the ideal mixture of Toyota Synthetic and Mobil 1 Synthetic Motor Oil functions smoothly in both low and high temperatures. Every six months or 10,000 miles, Toyota advises having factory-trained technicians perform an oil change (whichever comes first).
How long does a Corolla last before needing an oil change?
How often should I change the oil in my Toyota Corolla? One of the most essential and vital procedures for your car is an oil change. Every 7,500 to 10,000 miles, synthetic oil needs to be changed. For traditional oil, Toyota suggests changing your Toyota Corolla’s oil and filter every 3,000 to 5,000 miles.