The front and rear tires of the 2013 Hyundai Elantra are 205/55R16 in size. This indicates that the vehicle’s regular size tires fit its 16-inch silver aluminum wheels. The front tires should be inflated to 32 psi, and the back wheels to 35 psi. Use the tire pressure monitoring system (TPMS) located on your instrument dashboard to check your tire pressure if necessary. If it isn’t working, you can pick up a tire gauge for $2 to $8 at the majority of car accessory and part stores. You should budget between $50 and $240 each tire if you decide to replace the tires.
The 2013 Hyundai Elantra comes standard with 16-inch wheels. The 2013 Hyundai Elantra’s tire size is P205/55R16. The 2013 Hyundai Elantra’s recommended tire pressure is 32 psi.
In This Article...
215/45R17 XL
If the vehicle model is offered in one or more sizes, verification of the rim size must be done.
O.E. rim width alternatives or if the car already has rims that aren’t factory-installed.
Original equipment dimensions are based on the most up-to-date information. The original equipment size of your car may fluctuate due to choices or manufacturer modifications. Please make sure the indicated size corresponds to the tire size specified on your car (often found in the door jamb) or in the owner’s manual. Performance and handling may be affected if tires that have a lower speed rating than the original equipment tires are replaced.
NOTE: We take great care to offer the following search results in an accurate and current manner. Incorrect data may be the consequence of certain factors, such as vehicle changes, “Plus Size” fitments, or search menu selection problems.
NOTE: Driving in the winter poses unique mobility issues. Winter tire use, which increases traction performance in snow and ice, necessitates extra caution when accelerating, braking, turning, and speed. Driving carefully is essential on all types of roads, including dry and rainy ones, as well as on snowy and icy ones.
The rear tires are especially important for vehicle control and safe operation during braking and turning in winter driving conditions. Winter tires are therefore best used on all wheel locations.
Winter tire usage and fitting instructions may vary from vehicle to vehicle, so always refer to the owner’s manual or tire placard before making any decisions.
- All wheel positions benefit most from the use of winter tires.
- Any vehicle that has winter tires on the front axle must also have those on the back. All passenger cars, SUVs, and light trucks, including front-wheel drive, 4X4 and all-wheel drive vehicles, should have winter tires on both axles.
- It is advised (but not essential) that winter tires be mounted on the front axle of any vehicle if winter tires are used on the rear axle.
- The speed rating of each set of winter tires should be uniform. For use in winter circumstances, it is generally allowed to utilize winter tires that have a lower speed rating than the original equipment/all-season tires; however, speed should be lowered correspondingly. Vehicles should never go faster than the lowest speed-rated tire on the vehicle’s “maximum speed.” Failure of the tires could happen otherwise.
- Winter tires that are used in summertime conditions may quickly wear out.
- Where permitted by law, studded tires adhere to the same guidelines as above.
What is the price of changing the tires on a Hyundai Elantra?
The Best in Auto Repair The price to replace a wheel on a Hyundai Elantra ranges from $631 to $643 on average. Between $44 and $56 is projected to be the cost of labor, while $587 is the cost of the parts.
What size is the steering wheel on a 2013 Hyundai Elantra?
Size of 2013 Hyundai Elantra’s Steering Wheel The 2013 Hyundai Elantra’s steering wheel measures 14 1/2″ in diameter and 4 1/4″ around the grip.
What type of bolt pattern is used on a 2013 Hyundai Elantra?
We’ve written in-depth articles about the Hyundai Elantra and answered a lot of your questions about it. We’ll discuss the knowledge you need to have in order to choose the ideal replacement tires or rims for your Elantra today. We’ll focus on the bolt pattern for each generation in particular. Let’s begin with a brief response:
All Hyundai Elantra models produced after 2007 feature a center bore of 2.64 inches (67.1mm), a bolt pattern of 5×4.5 inches (5×114.3mm), and five lug nuts with a thread size of M12 x 1.5 that require 78.9 to 93.7 lb-ft (107 to 127Nm) of torque to be tightened.
That, however, hardly captures the entire picture. For each iteration, we’ve provided a more thorough description of the bolt pattern below. We also go through the individual lugs/bolts used, the center bore hub’s exact diameter, and the bolt torque requirements. Additionally, we have details on the precise tire and rim sizes for each engine type. You should be well aware of what you can and cannot purchase in this manner. Read on!
Which tire manufacturer does Hyundai use?
The best tires for Hyundai are available from Michelin(r) to satisfy your needs for safety and performance in every season and application.
What Hyundai lug pattern is it?
Although the majority of Hyundai models feature a 5×4.5 lug pattern, there are other dimensions you should be aware of if you intend to change your tires.
Hyundais make excellent family vehicles that are suitable for both long road trips and regular commutes. But before you can replace your set of tires after all that activity wears out your current set, you must first be aware of your Hyundai’s lug pattern.
How can I tell if the wheels will fit my vehicle?
The two simplest methods are to look at your car’s sticker plate, which should be inside the driver-side door, or to search online for the precise make and model of your car’s characteristics. That should indicate the typical rim size.
What is the Hyundai Sonata’s bolt pattern for 2011?
We’ve written in-depth articles about the Hyundai Sonata and answered a lot of your questions about it. We’ll discuss the knowledge you need to have in order to choose the best replacement tires or rims for your Sonata today. We’ll focus on the bolt pattern for each generation in particular. Let’s begin with a brief response:
All Hyundai Sonata generations produced after 2009 feature a center bore of 2.64 inches (67.1mm), a bolt pattern of 5×4.5 inches (5×114.3mm), and five lug nuts with a thread size of M12 x 1.5 that require 78.9 to 93.7 lb-ft (107 to 127Nm) of torque to be tightened.
The bolt pattern on Hyundai Sonata models made before 2005 is 4×4.5 inches (4×114.3mm). The rest of the requirements stay the same.
Are the wheels on Kia and Hyundai the same?
I currently have a Hyundai Kona that I am driving on winter tires that I had previously owned on rims from a Hyundai i30/Elantra GT.
The speedometer will deviate too much if your tire diameter doesn’t stay the same.
How can I determine my rim size?
The size of the wheels on your car should come first. You can discover that on the inside of the driver’s door frame or on the sidewall of the tires on your original wheels. For further information, see Tire Size Explained (Reading the Sidewall).
The fifth set of numbers and characters represents the wheel diameter (in inches or millimeters). What do the numerals on rims mean? The distance between the two bead seat regions, where the tire is secured to the wheel, is indicated by this number.
The width and offset of a wheel are also included in its size. The breadth equals the separation between each bead seat (from inside to the outside). The wheel and tire set’s alignment with the wheel well is determined by the offset.
Can wheels from one car be used on another?
You could decide to upgrade the wheels on your cars at some point. However, you might not be aware of which wheels from other cars will fit your automobile.
Fortunately, any vehicle’s wheel can be used as a replacement. The original wheel should, however, have the same bolt pattern, wheel offset, and size as the replacement.
By looking at the sticker plate on your door, you may determine the appropriate size of the replacement. Measure the wheel or get guidance from an auto retailer for a suitable replacement.
By choosing the incorrect size wheel, you run the risk of harming your car’s suspension, wheels, and brakes. You could even need to stop at the petrol station more frequently for refills.
What is a 5×114-3 fit?
Honda Civic or Mazda Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3 are the most popular vehicles with PCD 5×114,3.