Your 2017 Hyundai Accent’s original tire size is P175/70R14 84T. Below is a color-coded description of the tire size for the 2017 Hyundai Accent.
The tire size was created to accommodate 14-inch-diameter rims or wheels.
This tire can support a weight of up to 1100 pounds (500 kg), according to its load index of 84. A greater number indicates that the tire can support more weight. Lower values indicate the reverse.
This figure indicates that the aspect ratio of your tire is 70%. In other words, the sidewall height of your tire, measured from the rim’s edge to the tread, is 70% of its width. The sidewall height in this instance comes out to be 122 millimeters.
This letter indicates the design of your tire. About 99% of all tires sold today are made using the traditional manufacturing type, radial.
The highest speed that may be maintained for 10 minutes on this tire is 118 mph (190 km/h), according to its speed rating of T. A faster pace becomes risky.
In This Article...
2017 Hyundai Accent RB 1.6i
Standard equipment for the Hyundai Accent RB 2017 1.6i includes 5.5Jx14 ET43 rims wrapped in 175/70 R14 84T tires. What is:
- Rim width in inches is 5.5J;
- a rubber fitting with a diameter of 14″;
- ET43 is the disk’s offset in millimeters.
The 175/70 R14 vehicle tire marks are interpreted as follows:
- 175 — PROFILE width, measured in millimeters (cross section of the tire);
- 70 – profile height as a proportion of breadth;
- R: The cord’s radial wrapping;
- Tyre diameter in inches is 14.
Rubber can also be used to apply information about its load index and speed index, which measure its carrying capacity and speed parameters, respectively. The speed index is represented by Latin characters, such as 84T, while the load index is a two- or three-digit integer.
- 84 — 500 kg is the maximum weight the tire is permitted to support;
- T – the 190 km/h top speed limit for motor vehicles.
Utilizing the suggested tire sizes will aid in avoiding issues with driving control, safety, and other challenges. Which atypical sizes can be fitted? For possible alternate sizes for tuning, please see the chart above. Even so, the table may not include all of the available choices. For instance, discs with a larger diameter than themselves. Or, you might use wheels that are the same width but larger in diameter, which is a common choice among car owners. There is a vast selection of disks available; you can discover duplicates with the same specifications but an offset size of 1-2 millimeters more or less. There are too many alternatives to list them all.
The bolt pattern in this instance is 4×100, which is the same for all types of wheels. As a result, each disc is fixed to four bolts with a precise 100-millimeter gap between them. Diameter of a car hub: 54.1 mm.
Which Hyundai Accent wheels size?
The P205/45HR17 and P185/65TR15 tire widths are available for the 2020 Hyundai Accent. The wheel (rim) sizes for the 2020 Hyundai Accent are 17 x 6.5 and 15 x 5.5 inches.
What brand of tires does Hyundai use?
The best tires for Hyundai are available from Michelin(r) to suit your needs for safety and performance in any situation and circumstance. Enter your vehicle’s information again to view the full selection of Hyundai tires from Michelin.
What is the cost of a Hyundai tire replacement?
Best in Automotive Repair The average price to repair a wheel on a Hyundai Elantra ranges from $631 to $643. Between $44 and $56 is projected to be the cost of labor, while $587 is the cost of the parts.
What size lug nuts come on a Hyundai?
The wheel lug nuts have a diameter of 21mm. It may take numerous short throws and wrench resets to use a lug wrench like the one that came with the car. Once they are initially freed, the lug nuts might be removed the rest of the way much more easily with a ratchet, even a 20 volt battery-powered driver, and a 21mm deep hole socket, preferably six-sided. The spare tire can also be raised and lowered using the lug wrench.
Are the wheels on Kia and Hyundai the same?
I currently have a Hyundai Kona that I am driving on winter tires that I had previously owned on rims from a Hyundai i30/Elantra GT.
The speedometer will deviate too much if your tire diameter doesn’t stay the same.
Does Hyundai offer a tire warranty?
Hyundai offers a 5-year/60,000-mile New Vehicle Limited Guarantee, which is often known as a “bumper-to-bumper” or “basic” warranty. This warranty covers brake pads, tires, and windshield wipers.
What do the three numbers on a tire size signify?
Tire width, B The tire’s width in millimeters (measured from side to side, with the tire facing you) is indicated by the three-digit number that comes after the letter. The section width is another name for this. Aspect Ratio: C The two-digit aspect ratio is separated from the tire width value by a forward slash.
Which bolt pattern is employed by Hyundai?
Although the majority of Hyundai models feature a 5×4.5 lug pattern, there are other dimensions you should be aware of if you intend to change your tires.
A
Hyundais make excellent family vehicles that are suitable for both long road trips and regular commutes. However, before you can switch out your set of tires after all that activity wears out your current set, you must first be aware of your Hyundai’s lug pattern. A
Which alternative automobile wheels will fit your car?
Fortunately, any car has a replaceable rim available. All you need to do is make sure the new wheel’s bolt patterns, size, and offset match those on the old one.
By looking at the sticker label on the inside of the driver’s door or measuring the rim, you may determine the new wheel’s proper size. Take your car to a mechanic if you are not the do-it-yourself kind.
Where can I get my tire size?
The initials M and S (M +S) signify that the tire satisfies the requirements set forth by the Rubber Manufacturers Association for a mud and snow tire. There are three possible letter combinations for the letters: M+S, M/S, and M&S. These tires are all-season.
- You can find this information on the tire information sticker on your driver’s side door or in the glove box of your car in the owner’s handbook.
- Typically, those components include all the details about your tire’s size, characteristics, and recommended tire pressure.
The entire explanation of the numbers and letters may be found under the “Find your tire size on your tire” link.
How can I tell if new wheels will fit my car?
The two simplest methods are to look at your car’s sticker plate, which should be inside the driver-side door, or to search online for the precise make and model of your car’s characteristics. That should indicate the typical rim size.
What does LT on a tire mean?
When a tire size ends in “LT,” it refers to a specific type of “Flotation Light Truck” tire. These tires are capable of hauling high loads and handling heavy loads, but their tread pattern is designed to prioritize off-road traction so that they can “float” over sand and loose silt.
Can the same rim be used with different tire sizes?
Your car’s performance may be impacted by the condition of your tires, which are also necessary for safe driving, turning, and braking. You might be wondering if you can buy different-sized tires while still using the same rims if you are not content with the tires you now have.
As long as the tire and rims have the same internal diameter, you can change the size of your tires while keeping the same rims. However, because tires are flexible, the width and height can be altered. When selecting tires, be sure to pay close attention to the manufacturer’s specifications.
Understanding how tire specs operate is the key to adjusting your tire size. Once you comprehend the system used by all tire manufacturers, you should be able to locate tires that will fit your rims. I’ll demonstrate how to achieve it in this piece.
What automobiles have a 5×114-3 bolt configuration?
Honda Civic or Mazda Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3 are the most popular vehicles with PCD 5×114,3.
What does the Hyundai warranty not cover?
Hyundai vehicles come with bumper-to-bumper warranties that last for five years or 60,000 miles, whichever comes first. The coverage extends to manufacturing flaws that appear despite routine maintenance and operation of the vehicle. This is relevant to numerous chassis, electronic, interior, and outside components. The paint, which is protected for three years or 36,000 miles, is one of the exclusions.
For the first year or 12,000 miles, a few basic service adjustments, parts, and accessories are included. Routine maintenance tasks like replacing filters, wiper blades, burned-out bulbs, and fuses, as well as oil and other fluid changes, are not included. Additionally, the majority of warranty coverage may not apply to modified or damaged automobiles.
A wheel offset is what?
The distance between a wheel’s hub mounting surface and centerline is known as the offset of the wheel. There are three different forms of offset (measured in millimeters). * The distance between a wheel’s hub mounting surface and centerline is known as its offset.
A 4×100 bolt pattern: what is it?
The stud count (four) and bolt circle measurement (one hundred), the notional circle determined by the studs’ centers, make up the 4×100 Bolt Pattern or Pitch Circle Diameter (PCD).