Your 2009 Hyundai Sonata’s original tire size is P215/60R16 94V. Below is a color-coded description of the tire size for the 2009 Hyundai Sonata.
The tire size was made to accommodate wheels or rims with a 16-inch diameter.
With a load index of 94, this tire can support a load that weighs no more than 1474 pounds (670 kg). A greater number indicates that the tire can support more weight. Lower values indicate the reverse.
This figure indicates that the aspect ratio of your tire is 60%. In other words, 60% of the width is represented by the sidewall height of your tire, measured from the rim’s edge to the tread. The sidewall height in this instance comes out to be 129 millimeters.
This letter indicates the design of your tire. About 99% of all tires sold today are made using the traditional manufacturing type, radial.
The highest speed that may be maintained for 10 minutes on this tire is 149 mph (240 km/h), according to its speed rating of V. A faster pace becomes risky.
In This Article...
What size steering wheel comes standard with a 2009 Hyundai Sonata?
The 2009 Hyundai Sonata has a size rating of C and a 15″ X 4″ steering wheel (with a 15″ wheel diameter and a 4″ grip circumference).
Which tire manufacturer does Hyundai use?
The best tires for Hyundai are available from Michelin(r) to satisfy your needs for safety and performance in every season and application.
What is the Hyundai Sonata’s lug pattern for 2009?
We’ve written in-depth articles about the Hyundai Sonata and answered a lot of your questions about it. We’ll discuss the knowledge you need to have in order to choose the best replacement tires or rims for your Sonata today. We’ll focus on the bolt pattern for each generation in particular. Let’s begin with a brief response:
All Hyundai Sonata generations produced after 2009 feature a center bore of 2.64 inches (67.1mm), a bolt pattern of 5×4.5 inches (5×114.3mm), and five lug nuts with a thread size of M12 x 1.5 that require 78.9 to 93.7 lb-ft (107 to 127Nm) of torque to be tightened.
The bolt pattern on Hyundai Sonata models made before 2005 is 4×4.5 inches (4×114.3mm). The rest of the requirements stay the same.
That, however, hardly captures the entire picture. For each iteration, we’ve provided a more thorough description of the bolt pattern below. We also go through the individual lugs/bolts used, the center bore hub’s exact diameter, and the bolt torque requirements. Additionally, we have details on the precise tire and rim sizes for each engine type. You should be well aware of what you can and cannot purchase in this manner. Read on!
Are the wheels on Kia and Hyundai the same?
I currently have a Hyundai Kona that I am driving on winter tires that I had previously owned on rims from a Hyundai i30/Elantra GT.
The speedometer will deviate too much if your tire diameter doesn’t stay the same.
Which bolt pattern is employed by Hyundai?
Although the majority of Hyundai models feature a 5×4.5 lug pattern, there are other dimensions you should be aware of if you intend to change your tires.
A
Hyundais make excellent family vehicles that are suitable for both long road trips and regular commutes. However, before you can switch out your set of tires after all that activity wears out your current set, you must first be aware of your Hyundai’s lug pattern. A
Which alternative automobile wheels will fit your car?
Fortunately, any car has a replaceable rim available. All you need to do is make sure the new wheel’s bolt patterns, size, and offset match those on the old one.
By looking at the sticker label on the inside of the driver’s door or measuring the rim, you may determine the new wheel’s proper size. Take your car to a mechanic if you are not the do-it-yourself kind.
How can I tell if new wheels will fit my car?
The two simplest methods are to look at your car’s sticker plate, which should be inside the driver-side door, or to search online for the precise make and model of your car’s characteristics. That should indicate the typical rim size.
What automobiles have a 5×114-3 bolt configuration?
Honda Civic or Mazda Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3 are the most popular vehicles with PCD 5×114,3.
Can I use 16-inch wheels instead of 14-inch ones?
The only factor that matters is YOUR TIRES’ outer diameter. There is no difference if the outside diameter of the 14- and 16-inch tires is the same.
What automobiles have Mercedes’ bolt pattern?
What Vehicles Share Mercedes’ Bolt Pattern? The standard bolt pattern for Mercedes vehicles is 5 x 112. For luxury car brands like Audi, Volkswagen, Maybach, and Chrysler, this is a typical bolt pattern.
Which offset works with my car?
Simply put, to determine if your wheels will fit your automobile, measure the distance from the center of the wheel to the mounting point. The offset is as shown. To determine the back space, multiply it by the width of your wheel, and to determine the front space, subtract it. To see if it fits, compare this to your wheel well.
A wheel offset is what?
The distance between a wheel’s hub mounting surface and centerline is known as the offset of the wheel. There are three different forms of offset (measured in millimeters). * The distance between a wheel’s hub mounting surface and centerline is known as its offset.
Are spacers for wheels safe?
Wheel spacers that are placed correctly are therefore completely secure. The wheel is held to the hub by the clamping force of the wheel stud. The wheel studs elastically stretch as the lug nuts are tightened, acting as very firm springs. To 90% of the stud’s elastic limit, the lug nuts should be tightened.
When is an offset too much?
- Your daily driver can look and handle much better with new wheels and tires.
- Measuring offsets can be challenging. The incorrect offset can reduce vehicle stability even if the tire and wheel are sufficiently spaced apart. In general, you don’t want the new offset to depart from the old offset by more than 5 millimeters when using new wheels.
- Backspacing must be taken into account in addition to offset, particularly if your new wheels are wider than the originals.
- Ask a tire expert for help to make sure your tire and wheel combo fits properly, stays within load capacity, and provides you with the handling and stability you require.
Would you like to see some fitting alternatives for your vehicle? Look through the wheels that fit your make and model.
Important Notice: The information above is generic in nature and was compiled from a number of sources considered to be reasonably reputable. Your vehicle may operate differently than a regular vehicle, or its components may need to be repaired or replaced. For specific cautions, notifications, and other guidance related to the topics covered here, please refer to your owner’s handbook.