NOTE: Watch out for the spring in the filter cover behind the filter popping out with the old filter. To help you install the replacement filter correctly, Honda labels which side of the oil filter faces out.
Step 8: Replace the oil filter cover, then hand-tighten the 8mm bolts. To prevent leaks, use your socket and ratchet to evenly tighten each screw.
NOTE: The spring beneath the oil filter may require some pressure to be applied to the lid in order to thread the 8mm bolts.
9. Use the fill port on the left side of the engine, which is located opposite the dipstick port on the right, to add Honda 10W-30 motor oil to the engine.
NOTE: The Honda Rancher 350 only requires slightly more than 2 quarts of oil, so start with that amount.
Step 10. After letting the engine run for a while, check the dipstick to determine the exact oil level. If necessary, top off the oil to the proper level.
In This Article...
A Honda Rancher has an oil filter, right?
In our Rancher front crankcase cover schematic, the filter is labeled as #4 and is located on the right side of the engine. Get a rag below it so you won’t make a mess if some oil leaks out. Pull the filter out after removing the three 8mm bolts that secure the lid to the filter.
Can I run my ATV on synthetic oil?
My friend from out of state came to see me. He wanted to ride our motorcycles and four-wheelers around my city and for a while.
He checked off items on a pre-ride checklist as soon as he got here to make sure everything was prepared for our journey. He saw that his quad needed more oil, so he inquired if I knew of any motorcycle shops around where he could buy some ATV oil.
He should use the Mobile 1 synthetic motor oil I gave him. It’s not the same, he claimed, so he couldn’t.
Since I’ve spent the majority of my life riding four-stroke motorcycles and ATVs, I was unaware that the oil was different. I’ve only ever used 10w-40 designed for automobiles.
I added it to my article list and started searching for a solution, just like I do with every question that is posed. Here’s what I discovered:
If necessary, you can use automotive oil in an ATV or UTV. However, it’s not always advised. If you must, synthetic car oil in the weight of 10w-40 is your best choice. Your best bet is to use oils designed specifically for ATVs, motorcycles, and UTVs because they are designed to safeguard those smaller engines.
What kind of oil is required for a four-wheeler?
Traditional automotive motor oils typically have a viscosity of 10W-30 or 5W-20, whereas Polaris, for example, employs a viscosity of 5W-50 for their off-road engines.
Use 10W30 or 10W40, please?
Yes, to answer briefly. You can use either oil without any risk because they are both designed to operate equally well. Viscosity and base oil are two aspects of the two oils that differ from one another.
Viscosity describes how fluids move via pipes. A fluid is more difficult to move via a pipe or an engine the greater the viscosity value. The viscosity of an oil is inversely proportional to its thickness; in general, thicker liquids have lower viscosities than thinner liquids.
The heat index value indicates how effectively these oils flow at operational temperatures and during hot weather. The ability of a particular type of FZPNP or API Certified engine oil to keep your car’s components from being harmed by excessive pressure and high-temperature variations will depend on how highly rated it is.
The thickness at operating temperatures of the oils is the only distinction between 10W30 and 10W40. Since both formulations have a viscosity of “10 when reacting with air or other gases, they will both flow equally effectively at cold starts (surplus).
Use 10w30 oil to hasten the warming up of your engine. As it chills down with a lot less energy than standard oils do on hot summer days while they’re overheating, this will lessen the high temperatures and drag caused by cold weather.
This winter, replace your vehicle’s old high-performance fluids with new ones that are made specifically for these seasons to ensure that it runs smoothly.
You’ll immediately notice a difference in the acceleration time, allowing us to return to our cars without incident after spending the entire day outside. Whether something happened while I was simply going down the street or whether I had been traveling too far from home.
Summer is not the appropriate season to use 10w40 oil if you wish to prevent metal-on-metal contact between moving parts. It’s vital to keep our cars cool with a yearly tune-up as in hot temps even light greases might start melting and running out of control.
It’s a good idea to start with the proper fluids when you’re prepared for some winter driving.
Unless we have snowy circumstances, 10w30 is perfectly suitable for the summer and will help keep everything running smoothly throughout the entire season (which would be bad news).
The base oil lubricates moving parts in your car’s engine and makes an oil useful for lubricating them. Petroleum distillates are included in 10W30 while synthetic base oils including polyalphaolefin (PAO) and synthetic mineral oils are present in 10W40 (SMO). Although the physical characteristics of these two oils differ, they both have comparable chemical bases and behave similarly in your engine.
Will 10w30 work in my ATV?
The engines are constructed to maximize the performance of the selected viscosity. According to the start temperature, 0W30, 5W30, or 10W30 would be suitable options because the manufacturer in the aforementioned example guideline demands grade 10w30.
How frequently should a four-wheeler have its oil changed?
How frequently should the oil be changed should be your first concern. The reply is that it varies according to your ATV. Generally speaking, you should change the oil in your ATV once a year, or every 100 hours of use. To learn more about your particular ATV, though, make sure to consult your owner’s manual. As you read the instructions, make a note of the recommended oil and filter types and purchase them. Don’t just assume what you should get; utilize the necessary ATV oil change supplies if you want to maintain your vehicle operating properly. Consult your owner’s handbook for guidance on this choice.