Specifically, the 5×120 bolt pattern, I was simply curious about what other automakers utilize for their wheels. additionally the right offset and hub size.
I seem to remember reading somewhere that the wheels on subarus and mitsubishis (evo) are interchangeable and have a similar pattern.
It would be good to obtain a list of compatible wheels if someone has more information on this. I’m sure you could find some lovely, inexpensive ones.
What offset, too, would be helpful. I’ve also been interested in this. Recently, I’ve been examining some 17 x 7.5 and 17 x 8.0… I believe a 17 x 7.5 will work with a 45mm offset, but I’m not sure about a 17 x 8.0.
The wheels from that vehicle won’t fit the BMW. All of the center bores and offsets are unique. Eigentlich wäre es nur BMW. There are no other vehicles that fit.
There isn’t a BMW wheel with a load capacity large enough to accommodate the Honda Odyssey. Additionally unusual is the center bore. The bolt pattern is the only item that is same, and the offset is close.
In This Article...
What vehicles share BMW’s bolt pattern?
Knowing your car’s bolt pattern is essential since it enables you to understand how your wheels are fastened to your vehicle using lug nuts or log bolts. The wheels on your car will therefore fit snugly if your bolt pattern is ideal. But which automobiles share BMW’s bolt pattern?
The bolt pattern on a BMW is first and foremost 5X120 or 5X4.72 inches. Acura, Bentley, Buick, Cadillac, Chevrolet, Honda, Hyundai, JAC, Land Rover, Lexus, MINI, Opel, Rolls-Royce, Tesla, Toyota, and Volkswagen all have vehicles with a similar bolt layout.
There are over 168 different car types that use the 5X120 bolt pattern altogether. The majority of vehicles having a 5X120 bolt pattern are produced by BMW. 24 BMW vehicle models use this bolt pattern. However, JAC with 12 and BYD with 9 are closely behind it, and Land Rover and Volkswagen with 8 each.
However, it’s also crucial to remember that some older BMW vehicles use a 4X100 bolt pattern. These models include the BMW 320 & 323 from 1979 to 1983 and the BMW 318, 323, 325, 328, and 330 from 1992 to 2008. However, the most of these models are no longer being made and are difficult to acquire in stores.
Additionally, the G01 7-Series employs a 5X112 bolt pattern as of 2009 or later. The 5X112 bolt pattern, which has the same number of lug bolts but an 8mm tighter circle than the conventional BMW bolt pattern, is used by all G-Chassis BMWs as a result.
Which wheels from other cars will fit yours?
You should choose a replacement for your car with the utmost care because rims are crucial to vehicles. It would look out of place and interfere with your drive if you made the wrong choice.
Usually, you are able to swap your wheel for one from another car. The size (diameter and width), center bore, offset, and bolt pattern of the corresponding rims are some of the variables that affect this. Both sides ought to have similar characteristics overall.
BMW wheel bolt configuration? similar to who?
Hello, I recently purchased a set of HRE P40s for my E92 M3, and they look fantastic! But I was wondering what other cars the wheels would fit because I’m thinking about selling the car. Is the bolt pattern exclusive to BMW, or is it also used by other manufacturers? tks
The fact that BMW wheels fit on pre-1986 Opel Monzas and Senators is convenient for me because offsets are important.
I already asked for this one and requested 17 “steels from a cheap donor for my e36. Evidently, later T5 Volkswagens have the similar layout, but only go as high as 16 “typical aiui.
Excellent, so I take it that the E60 M5 is fine? What other Manufacturers are there? Including Merc, Aston Martin, Porsche, and Audi?
It is impossible to answer without knowing the size and offset of your wheels whether the offsets are acceptable. Hubcentric spacers could be used if the offset is too high, but not if it is too low.
130 Porsche 5 x. Merc 5 x112. TTs with an Audi 5 x 112 or 5 x 100. Model-specific, however 5 x 120 is not applicable to any astons.
Will Mercedes wheels fit BMW’s?
I have a 20-piece set “I now have alloy wheels on my M3, but I want to keep them so I can use them on the next vehicle I buy. Do you know of a bolt that will convert a BMW wheel (HRE P40 20) to a another manufacturer’s wheel bolt pattern? I know that you can purchase bolts that do this “) to a C-class Mercedes? (C63)
This is not accomplished by the bolt. Because it is a thick spacer, it may simultaneously have the BMW and Mercedes bolt pattern drilled into it.
Thus, after installing the spacer on the vehicle, the wheel is then bolted straight into the spacer using 10 lugs or bolts altogether. I’m not sure if they have BMW to Mercedes adapters, but they would be useless given that they are typically 20 to 25 mm thick. The difference in offsets between your Mercedes and the extra spacer thickness will prevent the wheels from fitting.
With the use of an adaptor, 5-120 bolt pattern wheels can be mounted on 5-112 bolt pattern wheels.
These adapters are 20mm thick, though. The M3 typically has roughly 20+ offset, while the C63 typically has 40+ offset. Therefore, even if the bolt pattern issue was resolved, it would still be extremely difficult to mount the M3 wheels on the C63.
Can any car be used with any wheel?
Car wheels all appear to be essentially the same when you look at them. Of course, their appearances are different, which is one of the first reasons you are thinking about switching to new wheels. But having a distinct appearance is only the beginning. Based on their intended use and the vehicles they are intended to be mounted on, wheels can have a wide range of features. They are not a one-size-fits-all type of thing.
They instead come in an enormous variety of various types, sizes, bolt patterns, and offsets. In order to determine which wheels will fit your car, you must be aware of these discrepancies.
Let’s see how a standard aluminum alloy wheel is built. A rim, spokes, and a hub are present. The middle section of the wheel that connects to the suspension is called the hub. The spokes of the wheel extend from the hub and are connected to the rim. The circular exterior circumference of the wheel, where the tire is mounted, is known as the rim. Some wheels don’t have spokes, such as the straightforward steel wheels that come standard on less expensive vehicles. Instead, from the hub to the rim, the wheel is practically made of a single piece.
Acura, BMW, Buick, Cadillac, Chevrolet, GMC, Honda, Land Rover, Lexus, Pontiac, Tesla, and Volkswagon are examples of common automobiles with a 5×120 bolt pattern.
- Honda MDX (2007-2013)
- Honda TL (2009-2014)
- Honda NSX (2016-2021)
- 1 Series BMW (2014-2020)
- 2 Series BMW (2013-2021)
- 3 Series BMW (1986-2019)
- 4 Series BMW (2013-2021)
- 5 Series BMW (1972-2016)
- (1976–1990) BMW 6 Series (2003-2019)
- 7 Series BMW (1977 – 2015)
- 8 Series BMW (1990-1999)
- BMW M1 (1978-1981) (1978-1981)
- BMW M2 (2015-2021) (2015-2021)
- BMW M3 (1986-2018) (1986-2018)
- BMW M4 (2014-2020) (2014-2020)
- BMW M5 (1985-1995) (1998-2017) (1998-2017)
- BMW M6 (2005-2010) (2012-2018) (2012-2018)
- Acura Allure (2010)
- Cadillac Lacrosse (2009-2016)
- Bugatti Regal (2011-2017)
- Chevrolet CT5 (2019-2021)
- CT6 Cadillac (2016-2021)
- CTS Cadillac (2007-2019)
- Corvette Camaro (2010-2021)
- Corvette by Chevrolet (2020-2021)
- Cadillac Equinox (2010-2017)
- CORVETTE MALIBU (2012-2018)
- Terrain GM (2010-2018)
- Civic Type R Honda (2015-2021)
- Honda Accord (2005-2021)
- Discovery 2 Land Rover (1998-2004)
- Discovery 3 Land Rover (2004-2009)
- Range Rover by Land Rover (1994-2021)
- Toyota LS (2006-2021)
- G8 Pontiac (2008-2009)
- S-model Tesla (2012-2022)
- Ford Model X (2015-2021)
- Renault Touareg (2003-2010)
Which wheels work with my vehicle?
The two simplest methods are to look at your car’s sticker plate, which should be inside the driver-side door, or to search online for the precise make and model of your car’s characteristics. That should indicate the typical rim size.
Which rims can be swapped out?
Fortunately, any car has a replaceable rim available. All you need to do is make sure the new wheel’s bolt patterns, size, and offset match those on the old one.
By looking at the sticker label on the inside of the driver’s door or measuring the rim, you may determine the new wheel’s proper size. Take your car to a mechanic if you are not the do-it-yourself kind.
Can I use 16-inch wheels instead of 14-inch ones?
The only factor that matters is YOUR TIRES’ outer diameter. There is no difference if the outside diameter of the 14- and 16-inch tires is the same.
What automobiles have Mercedes’ bolt pattern?
What Vehicles Share Mercedes’ Bolt Pattern? The standard bolt pattern for Mercedes vehicles is 5 x 112. For luxury car brands like Audi, Volkswagen, Maybach, and Chrysler, this is a typical bolt pattern.
What vehicles have a bolt pattern of 5 114.3?
Honda Civic or Mazda Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3 are the most popular vehicles with PCD 5×114,3.
Can a 5×114 3 fit a 5×120?
The fact that 5×120 to 5×114.3 wheel adapters can only fit on 5×120 vehicle hubs and convert 5×114.3 wheels is crucial to understand. To avoid wasting time or money, conduct some research before starting the project. Most of the time, you can quickly check the bolt pattern in your owner’s handbook or on Google by entering the model and year. However, there might be some exceptions, particularly if you don’t know the new wheels’ PCD.
It is best to measure the lug pattern size yourself, however. Choose one lug hole on a 5-lug wheel as your starting point, and then use a ruler to measure from the edge of that hole to the center of the hole next to it (skip the one bolt hole). The bolt pattern would be 5×4.5″ or 5×114.3 if the bolt pattern circle diameter is 4.5 inches (114.3mm). Of course, you can get help from your neighborhood auto shop.
How do I determine whether alloys will fit?
All you have to do is choose a vehicle using our simple vehicle selection. The distance between the hub-mounting surface and the actual centerline of the rim is known as the wheel offset, which is measured in millimeters and can be either positive or negative. The alloy wheel will protrude further from the vehicle the lower the offset.
What does a rim’s bolt pattern mean?
A bolt pattern, sometimes referred to as the lug pattern, is the measurement of an ideal circle made up of the lug holes at the center of your wheel, and it is provided in a two-number format. The wheel’s number of bolt holes is indicated by the first number. The second value represents the size of the hypothetical circle surrounding the holes.