Tire pressure on a Hyundai Elantra is 33 PSI. Tire pressure on a Hyundai Elantra GT is 32 PSI.
In This Article...
What are the tire size, pressure, and wheel size for the Hyundai Elantra?
The 2017 Hyundai Elantra has tires that measure 195/65R15, 205/55R16, 205/50R17, 225/45ZR17, 225/40ZR18, 225/35ZR19, and 235/35ZR19. I can also list the tire pressure if You’re interested. The Elantra’s tires should be inflated to 33 psi for rims with 15, 16, 17, and 18 inches. This car has wheels that are 6Jx15 ET46, 6Jx16 ET50, 6.5Jx16 ET50, 6.5Jx17 ET50, 7Jx17 ET53, 7.5Jx18 ET55, 7.5Jx19 ET55, 8Jx19 ET50, and 7.5Jx18 ET55 in size. Always keep a watch on your tires to check if they appear low, is what I would advise. Check the tire pressure to see whether it has to be adjusted if they do appear low.
The 2017 Hyundai Elantra has 15-inch wheels, 195/65R15 tires, and a 36 psi recommended tire pressure. Depending on the model, the 2017 Hyundai Elantra’s standard wheel size will change. The base variant of the 2017 Hyundai Elantra comes with 15-inch silver aluminum wheels as standard.
How much pressure should the 2012 Hyundai Elantra’s tires have?
The recommended tire pressures have been set to offer a secure driving environment, stable vehicle operation, and a comfortable ride. The label that came with the car (often on the driver’s door opening) will have the recommended tire pressure standard. The manufacturer recommends maintaining the 2012 Hyundai Elantra’s tire pressure at 32 psi (220 kPa) for all 4 tires.
To check tire air pressure, a reliable air pressure gauge is advised. Once a month, the cold tire pressure should be checked. When the weather’s temperature is unpredictable, check your tires’ pressure more frequently. When the temperature outside drops, tire pressure will also decline. Replace the valve cap with a finger-tight seal after verifying the air pressure.
The tire’s cold inflation pressure is always used to determine the inflation pressures listed on the tire inflation pressure label. After the vehicle has been idle for at least three hours, or after the vehicle has been idle for three hours and less than one mile, cold inflation pressure is obtained. During operation, tire inflation pressures may rise by two to six pounds per square inch (psi). Do not lessen this pressure buildup, which is typical.
- Inadequate inflation can result in:
- Variable wear patterns
- reduced tread life
- lower fuel efficiency
- Ride was unsatisfactory
- the moving vehicle
Tire inflation levels can impact how a vehicle handles. Vehicle control may be lost if a tire fails suddenly.
- Rapid shoulder wear, tire flexing, and possible tire failure are all symptoms of under inflation.
- Overinflation hastens the wear of the tire’s center and reduces its shock-absorbing capacity.
How much pressure should the 2020 Hyundai Elantra’s tires have?
The right tire pressure is essential for safe driving, optimum traction, and agility on the road. The recommended tire pressure for the Hyundai Elantra is 33 PSI for all four tires.
On a Hyundai Elantra, how do you reset the tire pressure light?
Set the key to the “On” position in the ignition with the car off, but don’t push the starter. Once the TPMS light has flashed three times, let go of the tire pressure monitor reset button. Start the vehicle, then wait 20 minutes for the sensor to re-calibrate.
What tire pressure for a Hyundai should I use?
The pressure on your Hyundai tires will change depending on the year, manufacture, and model. Most tire pressure levels lie between 32 and 35 PSI on average, although the recommended pressure can be found in your vehicle’s owner manual or on the tire itself.
Can 32 psi be too high?
After conducting many tests and calculations, the manufacturer has calculated the recommended tire pressure for each vehicle model. On the sticker or card inside the driver’s door of most recent cars, you may find the recommended tire pressure. The owner’s manual typically contains the information if there isn’t a sticker. When tires are cold, the normal tire pressure ranges from 32 to 40 psi (pounds per square inch). As a result, after a lengthy stay, check the tire pressure; often, this may be done first thing in the morning.
30 PSI—is that too much?
Technically, any PSI that is lower than the advised value is too low. However, most people believe that a variance of more than 10% is inadequate. A measurement of 31 or 32 PSI is regarded as being underinflated for a vehicle whose tires must be inflated to 35 PSI.
Should the pressure in all tires be 35 psi?
The psi requirement for the majority of passenger cars will be between 30 and 35 psi, however a number of vehicles fall outside of that range and each vehicle will have unique requirements. A smooth ride, evenly distributed tire wear, and improved fuel economy are all benefits of proper tire inflation.
50 PSI: Is it too much?
We’ll look at some more crucial information in the fine print on the side of your tires today as part of our series on tire information. A rated maximum inflation pressure is specified for each tire. It is frequently written in tiny text around the sidewall’s rim edge. It will read something along the lines of “Max. Load 340 kPa (50 PSI) Max. Press 670 kg (1477 lbs)”. This indicates that the tire may be securely inflated to 300 kPa (Kilopascal), or 50 psi, and will carry up to 1477 lbs. For reasons of ride comfort and handling performance, the vehicle manufacturer will frequently specify a little lower pressure on the door jamb label. It can occasionally be beneficial to inflate the tires to a pressure that is closer to the rating on the tire than the rating on the door jamb of the automobile for optimal tread life and fuel efficiency, but doing so might occasionally have a detrimental impact on ride comfort and perhaps traction.
The Department of Transportation (DOT) mandates that each tire sold in the US bear a unique number. The DOT number is a safety certification number that contains details about who made the tire, where it was made, and when (week and year), among other things. If a recall is necessary for a certain batch of tires, this number can be helpful. It is a good idea to register your tires with the manufacturer in case there are any potential safety or recall issues. You can submit a DOT registration card or do it online.
A directional marking is another feature you may notice on some tires. One side of some tires is intended to be positioned towards the inside or outside of the vehicle depending on the tire’s design. These tires should be mounted appropriately because they will either say “Inside” or “Outside” on the tire. Other tires can only be used in a specific direction to deliver good traction and treadwear. These tires are known as directional tires, and they contain a marker on the outside sidewall of the tire—usually an arrow—that indicates which way the tire should be placed for forward rotation.
That’s all there is to it. That is all the information that can be found on the majority of passenger car tires sold in the US. You can now make informed purchasing decisions and dazzle your friends with your tire expertise.
What occurs if psi is excessively high?
Tire Wear and Damage In addition to changing the tire’s shape, excessive air pressure can cause wear and tear in the tire’s center and reduce traction. Depending on the situation, tires that have been frequently overinflated may deteriorate more quickly.
When driving, how much PSI do tires increase?
Air contracts as a result of a change in temperature, and when molecules draw closer together, the volume decrease causes tires to lose pressure. Soon enough, your tires will not be properly filled. During the winter, be sure to check the pressure in your tires frequently.
Warm outside air causes the air within your tires to expand in the summer, just as cold outside air causes it to contract in the winter. The general rule of thumb is that tire pressure will increase by roughly one pound per square inch (PSI) for every 10 degrees Fahrenheit increase in temperature. So, if the manufacturer’s recommended tire pressure is 35 PSI, your tire pressure may be close to 40 PSI on one of those record-breakingly hot August days.
Driving means friction between the road and your tires, which equals heat, which equals — you got it — a rise in tire pressure. This is something to keep in mind especially in the summer. Because of this, your air pressure may rise by roughly 5 PSI in the first 30 minutes of driving, regardless of the conditions, before stabilizing. That number may increase, and not in a good way, during hot summer days when people are traveling at fast speeds for extended stretches of asphalt.
40 PSI—is it too much?
For some vehicles with specs within this range, a pressure of 40 psi may be suitable. But for some other tires, this number can likewise be too high or too low.
For example, sports automobiles or passenger cars may be suitable with a pressure level of 40 psi. However, this is too low for heavy trucks and below the recommended pressure of 35 psi for small cars.
The recommended pressure range for tires on well-known sports cars and passenger vehicles is 32 to 40 psi. Depending on the type of vehicle, a specific index will be given. It should be noted that this level is suggested while the tire is cold, so after a lengthy trip, you must check it again to ensure proper adjustment.
There are many various car models available today, and each will utilize a different type of tire. Therefore, the manufacturer will decide in advance what pressure should be used in each of these tires.
It is your responsibility to maintain the best level for the car to run safely and smoothly. To find out whether or not this 40 psi pressure level is good for your car, you must first verify the tire specifications.
Do tires need more than 38 PSI?
Hello, Car Talk! Our 2015 Toyota Camry’s owner’s manual advises keeping the tires inflated to 35 psi on all four wheels. Every month when I check the pressure, I find that a few tires may have lost one to two psi. After several attempts, I eventually got exactly that one psi in there as I turn the compressor up. Sometimes while adding air, I’ll overshoot by a half or a full psi, which I then bleed off. Does that need to be done? What tire inflation range between over and under is considered acceptable? — Jay
Jay, you don’t have to do that. You can mess around and get near enough with tire inflation while still leading a full and happy life. Under-inflation of your tires poses the greater risk of the two methods to miss your target.
Underinflated tires run hotter because they have a wider rubber contact area on the road, which increases friction. The belts of the tire may also detach and disintegrate due to heat. The Tire Pressure Monitoring System (TPMS), which is a built-in gauge and a means of communication with the car’s computer, is now a standard feature in every car. Furthermore, a dashboard idiot light turns on whenever any tire pressure falls by around 10% below the acceptable level.
You should let the pressure drop to 31.5 psi before adding air if your Camry calls for 35 psi. On the higher end, your options are more varied. You can overinflate your tires by 10% or even more with little to no repercussions as long as you keep them below the maximum tire pressure indicated on the sidewall of the tire (which is different from the recommended pressure). For instance, if 35 psi is advised yet 44 psi is specified as the maximum safe pressure on your sidewall, you can put 38 or 40 psi in your tires without risk.
The maximum pressure is 44 psi. Although the ride will be tougher, there won’t be a blowout risk. You might even notice faster cornering and better fuel efficiency.
Therefore, the suggested tire pressure is the ideal balance between handling, comfort, fuel efficiency, and safety when it comes to filling your tires. But it’s perfectly acceptable to exceed the advised inflation by one or two psi. Additionally, going over is always preferable to going under.
Get the day’s top news, local, sports, business, entertainment, and opinion headlines from the Union-Tribune delivered to your inbox every morning throughout the workweek.