205/55R16 tires have a section width of 8.1 inches, a height of 24.9 inches, and a diameter of 16. The circumference is 78.1 inches, or 811 miles per rotation. They can typically be installed on wheels with a rim width of 16 x 5.5 to 7.5.
In This Article...
What size wheels come on Honda Civics?
The Civic LX Hatchback has 16-inch alloy wheels with 215/55 R16 all-season tires on them. 235/40 R18 all-season tires are mounted on 18-inch alloy wheels on the Civic Sport Hatchback. The Civic EX-L Hatchback comes equipped with stylish 17-inch alloy wheels that are shod in 215/50 R17 all-season tires as standard.
Can a Honda Civic be fitted with 17 tires?
17.5″ wheels In this generation of Honda Civics, 17×8 wheels can be mounted flush or almost flush with offsets ranging from +45 to +35.
Which tires are standard on Honda Civics?
Depending on the model level, the 205/55R16 or 215/40R17 tires are standard on the majority of Civics. Nevertheless, some of the sportier variants have bigger, more aggressive tire sizes, including 235/40R18 tires or even 245/30R20 tires.
How can the size of your tires be determined?
The outer and inner “walls on the sides of a tire are known together as a tire’s sidewall. There are three primary portions to the information on each sidewall, each of which is distinct:
Department of Transportation Safety Code
By doing this, you may be sure that your tire conforms with all DOT safety regulations. Your tire’s identification number, which starts with the manufacturer and plant code where the tire was made, appears after the DOT emblem (two numbers or letters). The tire’s production week is indicated by the ninth and tenth characters. The final number or numbers denote the year the tire was made.
UTQG code
The National Highway Traffic Safety Administration (NHTSA) created the Uniform Tire Quality Grading (UTQG) to evaluate tires using government-approved test procedures and grade each tire on three key factors:
Treadwear: This is the tire’s rate of wear, which is only comparable to tires from the same manufacturer. The starting point grade is 100. On the government’s plan, a tire with 200 would therefore theoretically last twice as long as a tire with 100.
Grades for traction are AA, A, B, and C. (with AA being the highest grade). They serve as a measurement on a predetermined government track of the tire’s ability to stop straight on wet pavement. For use on roads, tires with ratings lower than C are not suitable.
Temperature: The degrees of temperature are A, B, and C, from highest to lowest. These show how well the tire can dissipate heat during controlled indoor testing. Any tire with a C or lower rating is inappropriate.
Icons
The initials M and S (M +S) signify that the tire satisfies the requirements set forth by the Rubber Manufacturers Association for a mud and snow tire. There are three possible letter combinations for the letters: M+S, M/S, and M&S. These tires are all-season.
- Typically, those components include all the details about your tire’s size, characteristics, and recommended tire pressure.
- You can find this information on the tire information sticker on your driver’s side door or in the glove box of your car in the owner’s handbook.
A detailed explanation of the numbers and letters may be found under the “Find your tire size on your tire” link.
Are the wheels on the Honda Civic exchangeable?
You can select a different size and offset for your replacement wheels, but they must have the same bolt pattern as your factory-installed wheels. In general, we DO NOT advise getting a wheel that is wider or taller than your factory wheel by more than 2 inches.
What distinguishes a 205 tire from a 215 tire?
You should be aware that installing 215 tires on a vehicle that was originally equipped with 205 tires will probably result in a slight rise in ride height. The difference in tire diameter between 205 and 215 tires is 0.4 inches, making 215 tires 0.2 inches taller than 205 tires. Even though this won’t have a significant impact, it is nevertheless important to note.
There are many advantages to having a greater ground clearance, including the ability to go through more difficult terrain, improved vision, and improved shock absorption. However, a higher ground clearance also elevates the center of gravity, which makes the car less dynamic and causes it to roll further into the corner.
What automobiles have a 5×114-3 bolt pattern?
Honda Civic or Mazda Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3 are the most popular vehicles with PCD 5×114,3.
How can I tell which wheels fit my car?
The two simplest methods are to look at your car’s sticker plate, which should be inside the driver-side door, or to search online for the precise make and model of your car’s characteristics. You can get the typical rim size from there.
What is a 5×114 3 bolt pattern?
The 5×114.3 Bolt Pattern or Pitch Circle Diameter (PCD) is made up of the stud count (5) and the bolt circle measurement (114.3), the notional circle determined by the center position of the studs.
The 5×114.3 bolt pattern is common to Acura, Alpine, Aston Martin, BAIC, BYD, Baojun and Changan automobiles. The following is a complete list of car makes and models: