On your central console, in front of the shifter, is the Drive Mode button. Once the car begins, your Elantra is immediately in “Normal” mode. For “Smart” mode, press the button once, and for “Sport,” press the button twice. Your instrument cluster will display the mode you have selected.
The standard driving experience that you have come to expect from Hyundai is offered in normal mode.
Your Elantra becomes a performance vehicle in sport mode. As the throttle response improves, you can move forward more quickly. At greater RPMs, the transmission will shift. Additionally, the steering tightens up, improving handling and control at greater speeds.
The Elantra’s Smart mode, which maximizes fuel efficiency, may be the most used driving setting. You will accelerate more slowly but more smoothly, and you will steer more gently. In order to improve fuel efficiency and save money, the air conditioning performance will also be reduced.
Your Elantra will go up to an EPA-estimated 41 mpg on the highway when in Smart Mode.
These driving modes have the unique feature that you can switch between them whenever you want, even while the car is moving. On a long drive, you can go in Smart mode, change to Normal when going up a hill, and switch to Sport to take advantage of a straightaway.
In This Article...
PMCErnie
Here, OP. Thank you for your comments, however I should add that I wasn’t talking about what I could “see” on the display when using smart mode; rather, I was referring to how the transmission made me feel. I’m stating that the transmission shift locations and gear holding feel precisely the same in Smart Mode as they do in Comfort Mode. The handbook gave me the notion that in Smart mode, it would observe your behavior and switch to Sport mode when it was suitable. In Smart mode, it has never provided me with Sport mode shift points.
There is no Eco mode on the ’21. I was using the term “eco” to refer to the peculiar circumstance where the transmission in Comfort mode repeatedly upshifts, leaving the engine idling at 1200–1300 rpm and unable to summon real power, necessitating that I put the car in Sport mode or floor it until it wakes up, which it occasionally resists doing. When it does, it usually happens at a speed of between 30 and 40 mph. At certain occasions, the transmission has likely upshifted one or perhaps two gears excessively and simply won’t let go.
Given that the transmission isn’t set up to prevent the rpm from falling below 1600, I would prefer it if it were, but since it isn’t, I was hoping Smart mode would figure out that if I semi-floor it, it should automatically kick itself out of the higher gears it’s clinging to. Instead, Smart mode seems to have the same effects as Comfort mode. Sincerely, I’ve never noticed, felt, or been aware of any distinction between the two.
Put SMART on your selection. Up the speed to 20 mph. Hold the pedal down at the floor position. You will see the word SPORT in your gauge cluster. You have briefly entered SPORT mode. Your car is operating as it was intended to.
You might not get a response because this is an old thread, and you might be restarting an old thread. Consider starting a new thread, please.
Hyundai Forum is a place where all Hyundai Owners can gather to discuss and learn everything there is to know about Hyundai vehicles, including the Sonata, Elantra, and even the brand-new Kona!
You can utilize Hyundai Drive Mode to immediately change the driving characteristics and feel of your Hyundai while driving, with options for Normal, Eco, and Sport.
How does the Hyundai smart mode function?
When you put your 2021 Palisade in Smart mode, it will observe how you’re driving and decide how to react. Your Palisade, for instance, will detect when you’re driving to enter a highway and switch to a sportier drive mode to maximize its power, acceleration, and handling.
Describe smart mode.
- Determine if you are operating in Smart Mode or Expert Mode. You’re in Smart Mode if your Google Ads account’s top-right icon is labeled “Settings.” You are in Expert Mode if the icon is labeled “Tools & settings” or “Tools.”
- Determine if you are in summary or detailed view if you are already in expert mode. You are in summary view if only the “Tools & settings” icon shows. You’re in detailed view if “Tools” and “Settings & Billing” have their own icons. To switch between views, click the icon next to the date range selector.
Whether you’re in Smart Mode or Expert Mode will have a modest impact on how you use Google Ads.
The streamlined version of Google Ads is called Smart Mode. In order to save time setting up and administering campaigns, it was created to make the advertising process simpler, enabling businesses to produce genuine results.
In Smart Mode, every campaign is a Smart campaign. Smart campaigns let advertisers select their marketing objectives and the platforms on which they wish to run ads. Google then uses machine learning to deliver results that are specific to these objectives, such as phone calls, website actions, and in-store visits, making it simple to reach a wider audience.
The complete complement of Google Ads capabilities and campaign types are available in Expert Mode. It provides advertisers with more comprehensive control over their bidding methods, but it also necessitates more intricate management. We advise it for experienced marketers and advertising because of this.
Does the Hyundai Smart Mode conserve fuel?
The performance of your Hyundai instantly improves when you select a setting from the numerous drive modes. The Drive Mode system from Hyundai has seven recognizable drive modes. What each of them performs is as follows.
Normal: This is the default setting for your car. Your vehicle’s acceleration and handling are adjusted in this mode to meet all of the demands of typical city driving.
Comfort: The Comfort setting is simply the Normal setting with a better name. The Comfort setting can be found in Hyundai’s more expensive models, such as the Palisade. Because Comfort and Normal are distinct names for the same option, you won’t find both settings on the same car.
For extended trips, Eco mode slows down your car’s acceleration, changes the transmission’s gearshift points, and makes adjustments to the air conditioning to help your Hyundai use less gasoline.
A
Sport: Select Sport mode to increase your vehicle’s acceleration and horsepower. By delaying gear changes in this configuration, your car can benefit from the torque produced at higher RPMs. The driver has more input and control as the steering gets heavier and more precise. A
Smart: The Smart mode combines the features of Normal and Sport modes. In essence, your car will operate in Normal mode settings but will convert to Sport mode when necessary, such as when passing another car on the highway. Unlike Eco mode, Smart mode is not intended to aid in fuel conservation.
Snow: Driving in the winter can be tiresome. In order to help you retain traction in snowy situations, snow mode restricts the RPMs and torque of your car while reducing acceleration.
N-Mode: Take your Hyundai to the racetrack and engage N-Mode if you’re searching for some thrills. This setting sharpens your Hyundai’s steering and throttle for high-performance driving. Additionally, settings for suspension, engine responsiveness, and exhaust sound can be changed.
What does Elantra’s Sport mode do?
Sport: Be sure to try out Sport mode for a more spirited driving style. To maximize performance, turn on this level to increase steering wheel sensation and engine response.
What does a car’s comfort mode do?
For frequent and lengthy drives, this mode is appropriate. The most balanced driving option is your Comfort mode, which strikes a decent mix between Eco and Sport settings. Additionally, it provides a smoother suspension feel and lighter steering to reduce the driver’s steering effort.
The vehicle will soften the suspension and reduce the steering feedback in Comfort mode, providing a comfortable ride with simple handling. In other words, you’ll feel like you’re “flying down the highway on clouds.”
What different driving modes are there?
There are driving modes for various off-road situations on many pickup truck and SUV models; typical off-road modes include settings for:
- navigating mud
- driving in snow
- Driving in rocky terrain or climbing over rocks
- navigating soft sand
- On-grass driving
- dragging gravel
Read about how AWD and 4WD differ from one another in this article. Check out our car features for intriguing articles on a variety of topics, including how to optimize and customize your off-road vehicle for the bush, engine swaps, fascinating SUVs we’ve forgotten about, and automobile comparisons.
Why is the gas consumption on my Hyundai Elantra so high?
Oxygen sensor that is dirty: An oxygen sensor determines how rich or lean the exhaust gases are as they exit the combustion chamber. The data is utilized by the car’s computer to modify how much fuel is injected into the engine. A decrease in miles per gallon may result from a dirty or malfunctioning sensor. It may also result in a rough idle and failed emission testing.
Fuel injectors that are dirty shoot fuel into the cylinders, where it ignites when it comes into contact with air. The fuel injector system is susceptible to clogging over time. This may result in decreased fuel efficiency, poor acceleration, and insufficient power for the vehicle. If discovered early, the issue can be resolved by simply cleaning the injectors. The injectors could need to be changed as it develops.
Spark plugs that are faulty or dirty light the fuel in the combustion chamber. They can cause the engine to misfire and perform poorly if they’re unclean or operating improperly. This may result in both a loss of power and a significant drop in fuel efficiency.
Mass airflow sensor malfunction: A mass airflow sensor measures the volume of air entering the fuel injection system. It sends that data to the computer of the car, which computes the data and then injects the right amount of gasoline into the car’s air. As the issue worsens, a filthy airflow sensor can efficiently deteriorate fuel, cause a rough idle, and possibly cause stalling.
Tires that are out of alignment or that are low in the air might reduce fuel economy. Regularly checking the alignment and tire pressure can also help to avoid this issue.
Gasoline supply problems, such as a defective fuel pump, can significantly reduce fuel economy. Fuel is transported to the fuel injectors by the fuel pump from the gas tank. The gasoline pump may develop a blockage or stop working. A malfunctioning fuel pump can cause an engine to run poorly because it is not receiving enough fuel. Gas mileage will decrease as a result of this. If this problem is not fixed, the engine will run rough, idle, splutter, and stall.
Fuel filter blockage: A fuel filter clog will also result in poor gas mileage. The gasoline filter removes impurities from the fuel, however it will eventually become blocked. Periodically, fuel filters must be updated.
Stuck Brake Caliper: A jammed caliper on a drum brake or a jammed shoe on a disc brake can significantly reduce fuel efficiency. Furthermore, any brake problem can make driving the car risky. The brake system needs to be checked right away if the car pulls to one side along with the efficiency reduction.
How can I improve the fuel economy of my Hyundai Elantra?
Most people can start by improving their driving efficiency. Although it is simple to state, most people are unaware that there is a speed range or ideal speed for cars to achieve their best MPG. When a car is moving more than 50 miles per hour, gas mileage often drops significantly. Your car’s fuel efficiency suffers greatly as a result of your aggressive driving and abrupt stops.