Rough Country’s 40-inch LED Upper Windshield Kit for Honda Talon models lets you COMMAND THE DARK. This convenient upgrade kit comes with everything you need to install a 40-inch LED light bar on your Honda Talon UTV in the ideal forward-facing position for off-road illumination.
You can continue exploring the trails well after sundown because to the 488 watts of high-intensity CREE LED output that can produce up to 36,000 lumens! These outdoor lights come with a superior wire harness, a toggle switch, and an in-line fuse in addition to having a tough, IP67 waterproof, die-cast aluminum shell.
The best part is that this simple-to-assemble kit has a 100% bolt-on installation process that makes upgrading your Talon quick and simple. Take advantage of this chance to upgrade your UTV with one of the top Honda Talon Accessories on the market!
In This Article...
A Honda Talon uses what kind of bolts?
BOLT PATTERN 4/136 Both Talons have 15-inch wheels that are 8 inches wide in the back and 6.5 inches wide up front. The rear wheels have a 33mm offset. The Talon R has black wheels, while the X wheels have a machined appearance. They all feature a bolt pattern that Honda rates as 4/136.
What distinguishes the Honda Talon 1000R from the Honda Talon 1000X?
Honda created the 1000R for high-speed SXS circumstances, whereas the 1000X is a SXS designed with maneuverability in mind. This is the main distinction between the Honda Talon 1000X and the Honda Talon 1000R.
The same engine powers both the Honda Talon 1000X and 1000R. The Honda Pioneer is also powered by a 999cc liquid-cooled parallel twin engine with a maximum output of 104 horsepower. The 1000X and 1000R Talon versions both transmit power through a dual-clutch transmission, so while this may appear to have a bit less power than the well-known Polaris RZR on paper (DCT). More directly, this transmission sends power to the Honda Talon’s four wheels.
The two have the same hi-low sub transmission and DCT. This implies that the Honda Talon becomes a 12-speed vehicle when the paddle shifters are used. This improves the driving experience in terms of obstacles or speed.
Worth buying the Honda Talon live valve?
Though it might not be the greatest in every performance category, overall performance is pretty close in many respects. Is it worthwhile to update Live Valve? Absolutely. If you’ve ever had to replace suspension parts on an ATV or even a side-by-side, you know how expensive it can be.
Can a Honda Talon be fitted with 14-inch wheels?
The editors of UTVGuide.net ran several hundred kilometers of difficult terrain on a brand-new Honda Talon equipped with STI X Comp tires mounted on HD9 Beadlocks. The whole report is available on the UTVGuide.net website, and you can view some of the highlights and pictures below.
said UTVGuide:
- It’s a fantastic vehicle with a lot to offer the enthusiast who spends most of their time outside of sand dunes. Among the features are the plush suspension, plenty of bottoming resistance, excellent turn-in, and a reliable motor.
- The 14-inch tires that STI offers do fit after extensive testing in-car with both prototype Talon units and their own company-owned Talon 1000R.
- Since STI has done its research, they already sell offset-compatible 14 and 15-inch wheels that will fit the Talon X and R.
For a Honda Talon, what offset?
Every Honda Talon wheel comes with a 4×136 bolt pattern as standard, although Honda claims that running rims with a 4×137 bolt pattern is also safe. The Talon also employs 12mm x 1.5 lug nuts, same like the Pioneer. The Honda Talon R 1000 and the Honda Talon X 1000 both come standard with 15 rims, in contrast to the Pioneer. The front and rear tires on these rims are 28 x 9 and 28 x 11, respectively.
The hub-to-hub width at the front of the Honda Talons is about 3 inches smaller than the rear, and the wheels have a 6+1 offset out of the box. You’ll need wheel spacers to retain factory tracking if you want to run the same offset on the front and rear. Alternatively, there are options like STI rims with an offset of 6+1 in the front and 4+3 in the rear, or System 3 rims with an offset of 5.5+1.5 in the front and a 4+3 offset in the rear that will put the front and rear widths within an inch of each other if you want your bike to have a similar front and rear width.
Where was the Honda Talon made?
Honda created the Talon UTV to directly compete with the well-liked Polaris RZR. There are versions of this side-by-side (SXS) with two doors and four doors. It is a Honda off-road vehicle with a 999 cc engine that has enough power for both work and play. Where, though, is the Honda Talon made?
Honda Powersports claims that the Honda Talon is “manufactured in the USA. The entire project is still global. According to Marysville, Ohio’s Chief Engineer of Development Planning, Jeremy McGuire, “HGA is still ultimately responsible for the engine and transmission” (Honda Giken Asaka, or Honda Japan). Since McGuire has worked for Honda since 1999, it is safe to assume that he is familiar with how the company’s product development process operates.
The transmission and engine are the only parts of Honda’s U.S. Powersports products for which Japan is ultimately responsible. They provide the engine, and we build everything else around it, according to McGuire. The final Complete Build Unit is entirely the Ohio side’s responsibility. With U.S. associates under the direction of the project leaders within the corresponding function groups, we are in charge of the complete frame, body, plastics, electrical system, and suspension. Although there are also Japanese technical professionals present, U.S. employees are mostly in charge of the development itself.
Honda’s U.S. Powersports division is in charge of creating and manufacturing the Talon and other off-road vehicles, aside from the engine and transmission. Additionally, Honda of South Carolina production facilities produce the Honda Talon as well as additional ATVs and SXS products.
How quickly can the Honda Talon 1000 travel?
Surprisingly, the 2021 Polaris Ranger XP 1000 Trailboss accomplishes 64 mph, compared to the 2021 Honda Talon 1000X’s peak speed of 73. Even so, the utility rig is still quite rapid.
Polaris RZR vs. Honda Talon: Which is better?
However, a 999cc, 106 horsepower engine powers the Honda Talon 1000X and 1000R. The Polaris RZR’s twin-cylinder engine can produce up to 110 horsepower. Although there isn’t a huge disparity here, the Polaris UTV wins on paper.
However, like the Honda Africa Twin, the Honda UTV side-by-side has a dual clutch transmission (DCT). Contrarily, the Polaris RZR XP1000 uses a continuously variable transmission (CVT) that is belt-driven. The Honda Talon will have an advantage in some off-road driving circumstances thanks to the more direct power from the dual clutch system.
How quiet is the Honda Talon?
The Talon exhaust is as quiet as we would expect from Honda, yet it makes a fantastic sound as the engine shifts gears while accelerating. Compared to a CVT sound, it is more pleasurable. The Talon boasts composed and reliable handling, in part because of its long wheelbase.
Can you trust Honda talons?
The Talon is a very high-quality device. It might not be the vehicle for everyone because it lacks a turbo or a long-travel option for the four seats, but it is a vehicle that can withstand the abuse of practically anyone. With this equipment, Honda continues to uphold its stellar reputation for creating durable, dependable products.
What horsepower is a 2022 Honda Talon 1000R equipped with?
Powertrain: Performance, Engine, and Transmission The 999cc parallel twin with 105 horsepower and the six-speed dual-clutch transmission are carryovers from 2021.
What does the Honda Talon’s Fox Live valve do?
A game-changer is FOX Live Valve. Because the shocks automatically adapt in real time, suspension performance, handling, and ride comfort are all increased. Forget about using a soft setting for leisurely cruising or a firm setting for rapid handling or bottoming resistance in shock adjustment.
What size wheels fit the Honda Talon?
Although you may use a variety of alternative size wheels on the Honda Talon 1000, going with the OEM 15″ wheels is the way to go if you want to maintain the factory look. This section contains a list of all of our 15-inch wheels “size. There is undoubtedly a wheel that will suit your needs among the wide selection of models we provide in both beadlock and non-beadlock wheels.
For reference, the Honda Talon’s bolt pattern is 4/137, and its factory wheels measure 15×6.5 up front and 15×8 back. most 15 aftermarket “You can run wheels that are 15×7 all the way around and will make up the difference.
Honda Talon wheels would they fit?
The Talon’s lug has a different thread than the Can Am’s, despite the fact that their bolt patterns are identical. The same bolt pattern will therefore function, but if your spacer uses CanAm lugs, your Talon’s lug nut will not fit.
How big are the tires on a Honda Talon?
The 28-inch height of the Talon Maxxis OEM tires. Without changing the suspension, the 32-inch-tall EFX tires we installed produce a lift of almost 2.5 inches.
Why are Honda side-by-sides hard to come by?
What explanation has Honda provided for this sporadic release of bikes in 2021? As it happens, the ‘Rona’s aftereffects are the cause of this. As a wager that Honda would similarly reduce production, the suppliers of parts for Honda’s bikes, ATVs, and SXSs reduced their output.