The next step, where to put coolant in a BMW 5 Series, is perhaps the one you are most interested in. Now that you understand how crucial it is to maintain the appropriate quantity of this coolant. Here are the many methods to help you identify the expansion tank that holds the coolant for your BMW 5 Series, and finding it is fairly simple:
- Wait a few minutes or so for your engine to warm up before taking any action to avoid getting burned when checking the coolant level.
- Your car’s hood should be opened.
- The expansion tank for your BMW 5 Series’ coolant must be promptly located; it is typically located in one of the four corners of your engine block. To find it, simply search for a plastic container with a black or yellow plastic cap and a hazard emblem or thermometer on top.
In This Article...
Procedure
- Hood is open. The hood release on your BMW 3-Series can be found underneath the dashboard. When you hear the BMW hood pop open, pull the lever.
- The hood safety clasp at the front of the car must then be released. The hood should be raised and locked open.
- the Coolant Reservoir’s location. The BMW’s coolant reservoir (tank) can then be found. Here, you may check the coolant level and top it out if necessary. The coolant expansion tank is found on the driver’s side of the engine in a 3-Series. Slowly remove the cover. Only after the engine has cooled should you open the cap.
- Remove cap to check the coolant level in a BMW 3-Series. Observe the low and high levels in the coolant reservoir tank. You must replenish coolant if the level falls below the minimal level, or your 3-Series risked overheating. The floating gadget is used by the BMW 3-series to gauge the coolant level.
- Add antifreeze and engine coolant. Only use the BMW-recommended coolant type.
- 316i
- 318i
- 320i
- 323i
- 325i
- 325xi
- 328i
- 328xi
- 330i
- 330xi
- 335i
- 335is
- 335xi
- 320d
- 320xd
- 325d
- 330d
- 330xd
- 335d
- M3, M3 GTS
The 2004–2013 BMW 3-Series Check Level & Add Coolant instruction is intended to be helpful. For additional assistance with your BMW, consult these troubleshooting and repair instructions.
How do I add coolant to a 2005 BMW?
The luxury of owning an expensive car, like a BMW, is enjoyed by many people. As many people are aware, driving can be challenging and may result in mishaps and repairs. Making sure that the coolant levels in any car are never low is essential since doing so could seriously harm the engine. As a result, the following is how to add coolant to your BMW 5 series: Items / Tools Required: -3-inch rubber or clear tubing -Coolant 1-gallon container -Ratchet wrench with an attached 10mm socket head Step 1: Before starting this method, park your BMW on a level surface. Step 2: Locate the coolant reservoir tank, which is close to the windshield wipers and beneath the right side of the hood compartment. A coolant tank on the left, a bit above your reach, may need its black cover removed. Step 3: After you’ve found the container, remove the bolt fastening it by using a wrench. It ought to be about 10mm in diameter. You will require this bolt shortly after filling with your new coolant mixture, so do not totally remove it. Step 4: Insert the hose end into the plastic container and tighten the cover. Make sure the hose does not bend at an angle or deviate from its straight position, as this could lead to subsequent breaks in the hose or the entry of air bubbles through the hose connection to the radiator. Step 5: Remove the bottle top and slowly pour one gallon of coolant fluid into the plastic reservoir tank into a clear jug or container. Step 6: After tightening the bolt with a ratchet wrench, reinstall the cap on the coolant reservoir tank. Be careful not to overtighten the bolt as this could harm the plastic tank. Step 7: Reattach the black lid to the tank containing the coolant reservoir. Your BMW 5 series now has coolant in it, congratulations! In the future, make careful to monitor the coolant levels and top it off as necessary. It’s crucial to keep on top of this crucial auto maintenance work because continuing to drive with low coolant levels could result in catastrophic engine damage in the future! Gratitude for reading.
How much coolant does a BMW 528i require?
A BMW 528i coolant change typically costs between $333 and $377. Between $166 and $209 is projected to be the cost of labor, while $168 is the cost of parts.
What occurs when a BMW’s coolant level is low?
The most frequent cause of the coolant indicator on your dashboard being activated is low coolant, so it’s critical that you have your car looked at right away to prevent the engine from overheating. You run the risk of costly and harmful damage to your car if you opt to disregard the warning light.
When the low coolant indicator turns on while you’re driving, you should stop as soon as it’s safe to do so. You must wait at least 30 minutes for the engine and fluids to cool down in order to avoid getting burned.
Check the coolant reservoir once your car has cooled off by opening the hood. If the reservoir’s coolant level is low, carefully open the reservoir and add enough coolant to fill it to the level indicated on the tank.
You may want to have your car towed to a repair if there are any obvious leaks, but if there aren’t any and you feel confident behind the wheel, you can drive it yourself to a nearby mechanic. In either case, you should have your car checked out and maintained by a professional technician as soon as you can to have any potential problems rectified.
How often should a BMW have coolant added?
Typically, every 30,000 miles or every two years, you should have a BMW coolant cleanse conducted. Your car may be able to go longer between flushes in specific circumstances.
How can I tell if the coolant in my BMW is low?
- Dashboard warning light: Your car’s dashboard may alert you when coolant or antifreeze levels are low.
- A rising temperature gauge could indicate that the temperature of your engine is rising.
What results in BMW losing coolant?
Your BMW might have one problem. Several issues, including a damaged radiator, a poor head gasket, or a frail radiator cap, might cause coolant leakage. You should contact a specialist as soon as you notice a coolant leak as this could cause very serious issues for your engine.
Can I substitute water for the BMW coolant?
Your radiator system becomes more contaminated when you use water. Although using water instead of low coolant is significantly better for the engine, you should switch the water out as soon as you can for the proper coolant for your car.
Any remaining coolant in the radiator is diluted when water is added to it. Preventing corrosion, raising the boiling point of water, and reducing the freezing point of water are just a few of the crucial jobs that coolant does. While using water in place of the coolant will allow you to drive the automobile for a brief period of time, your engine won’t be adequately protected.
This means that the radiator needs to be filled with a 50/50 mixture of coolant and water as soon as the issue that led to a low coolant level is resolved.
How much does a BMW coolant replacement cost?
Coolant leak repairs can be very expensive. Fixing this is expensive because it is a laborious operation. The price of BMW coolant repairs varies depending on a number of factors, but it typically ranges from $750 to $1,000. Although the parts themselves are not very expensive, the labor required by mechanics means that they may charge more for this kind of repair. The type of damage and the specific fixes the mechanic needs to do determine the costs of these repairs. You can be given a few alternative solutions for resolving your BMW coolant leaks by them.
Every option has pros and cons, so you should consider them all carefully before selecting one. Prior to selecting a mechanic, you should always collect various bids. Every repair shop will impose a different fee. If it does, it’s critical to decide which solutions are best for you and your circumstances.
They will be able to assist you during the entire decision-making process because you are working with reputable automotive shops. Since this is a significant purchase, you want the greatest possible workout for the money you are spending, thus you want someone to assist you.
Is the BMW coolant blue or green?
To maintain your cooling system operating at its peak, we advise using only German OEM BMW engine antifreeze, part number 83192468442. (83 19 2 468 442). Because they don’t include nitrites, amines, phosphates, or borates, BMW exclusively suggests specific coolants. It is not permitted to use store-bought coolant from a nearby parts retailer.
2018 saw the introduction of this new green coolant, which has replaced the previous blue coolant. Green can be used on automobiles before 2018 and is backwards compatible with blue. BMW advises against using the older blue formula on vehicles created after January 2018.
The silicates in the green coolant provide further protection for the cooling system’s internals, although the coolant needs to be changed every two years.
For increased corrosion resistance, anti-freeze defense, and water pump lubrication in street cars, we advise combining distilled water in a 1:1 ratio with the mixture. Reduce the amount of antifreeze in your coolant mixture if you want more cooling properties, but only in warmer climates where freezing is impossible (see chart below). We advise monitoring the freezing point of the coolant mixture if you want to use antifreeze and water ratios other than 1:1.
Red Line Water Wetter can also be added if high temperatures could lead to engine banging or pre-ignition.
- Original BMW HT12 antifreeze from Germany, part number 83192468442
- optimum cooling, freeze prevention, lubrication of the water pump, and corrosion resistance
When I add coolant, can I drive my car?
After adding coolant, you should let your car run for a bit while you check for leaks below. Air bubbles in the cooling system are eliminated in this way. After that, turn off the engine and, if necessary, top off the coolant. Once more, let the car run for a while, and then look for leaks.
Make sure the coolant is circulated throughout the engine before adding more, and check the system for air bubbles. Air bubbles are removed and the coolant is distributed evenly throughout the engine by running the vehicle. While doing this, make sure the drain plug is securely fastened and the coolant isn’t leaking under the car.
Can coolant be poured right into the reservoir?
Add the proper coolant to the reservoir if the coolant level is low (not the radiator itself). Either diluted coolant alone or a 50/50 blend of concentrated coolant and purified water are acceptable. Replace the cap and tighten it until you hear it click when the coolant reaches the cold fill line.
How frequently should coolant be added?
It may be time to have your old antifreeze drained and replaced with new fluid if you find that your car is running warmer than it usually does or if you have difficulties starting it in the winter. Most automakers advise a coolant cleanse every 30,000 miles or two years, whichever comes first, on average. To find out the precise advice for your car, it is best to consult your owner’s handbook.
Having said that, if you see the following, you may need to get your antifreeze changed before it should.
- Dark green liquid (silicate antifreeze)
- Dark fluid in the extended drain antifreeze color of gold/orange.
- antifreeze odor while driving or after
- burning odor while driving or after
All of these signs may point to antifreeze that is deteriorating, unclean, and old. You can also see non-oil leaks on your garage floor. This also suggests a problem. In addition to a radiator cleanse, you also require an examination if you frequently need to add antifreeze to your car.