Vehicles without hydraulic power steering will activate the EPS system, which stands for electric power steering. The steering angle sensor provides data to the EPS system’s control module rather than hydraulics. To offer power-assisted steering, this in turn regulates the steering motor.
It could be more challenging to identify the issue if the EPS warning light illuminates in your car because you won’t have any fluid levels to check.
You should thoroughly inspect all of the connections to the battery to look for any signs of wear or damage because it may occasionally be caused by a problem with the battery or alternator.
You may also experience an EPS light problem if you recently needed to jumpstart your car or if you disconnected the battery.
Sometimes the issue might be resolved by simply turning your car on and off again. Even if this works, you should still have your car checked at a nearby garage because there might be a deeper problem.
In This Article...
EPS system malfunctions
Despite being a dependable car component, EPS occasionally fails, which compromises safety. Because of this, system failures require repairs. The driver might not notice an abrupt EPS failure. When error display is absent, this occurs.
A quick test can be used to determine the state of the EPS system:
- spin the wheel when the engine is off;
- Reverse the wheel after starting the engine.
When turning the wheel requires a lot of effort in both circumstances, compare the two impacts and further diagnostics are urgently needed.
On sometimes, EPS will cease to function when the speedometer is off. The most likely cause of failure in this instance is a speed sensor issue that affects both the speedometer and the power steering. It is necessary to replace the sensor or the cable since the speed sensor itself can become damaged.
In the event of a voltage decrease, EPS repair is required. Additionally, undervoltage might cause EPS to shut down, while overvoltage comes with a surge-voltage protector. A car battery, an alternator, or a circuit problem can all result in EPS failure. All of those auto parts should receive routine maintenance.
What does the Hyundai Elantra’s eps light mean?
The electronic power steering system in your car experienced a failure, as indicated by the EPS light on the dash of a Hyundai Elantra. Unlike the previous hydraulic steering systems, your car employs an electric motor to assist with steering. This light on the dash will turn on when your ECU detects a problem with the power steering motor. To determine the root of the issue, you should have your car inspected by a mechanic or a Hyundai shop. A power steering motor failure is a possibility, but it’s also possible that it’s something as easy as a blown fuse or a loose wire. When it is malfunctioning, you will typically also notice that your steering feels heavier.
The EPS turns on when you insert the car’s keys. When I start the automobile, it goes off again. If there is a problem, kindly respond.
If the electronic power steering system (EPS) light is on in a Hyundai Elantra, there may be a problem.
I recently had a CVS joint installed on my passenger side, and as a result, I now have three lights: an EPS light, an ABS light, and a low tire pressure light.
What does the EPS Warning Light (electric power steering system) mean?
The instrument panel houses the electric power steering (EPS) Warning Light. When the light is on, it indicates that the EPS system is malfunctioning and that the car needs to be fixed.
The EPS warning light flashes briefly when the car is turned on, like all warning lights do. Only if the light is illuminated while the engine is running is it a problem.
The informative nature of the aforementioned claims warrants independent verification. kindly visit our
What Are Some EPS Malfunctioning Causes? Know This
While some automakers continue to use hydraulic power steering, today all automakers produce vehicles with electronic power steering, or EPS (HPS). The advantages of an electric powered steering over a traditional one are considerable. The EPS turns the car quickly thanks to an electric motor that is linked to the steering and column drive. These motors’ control units include a few sensors that are connected to the electric power of the vehicle. In hydraulic steering, a lot of energy is needed to move the wheels, however with electric steering, things work a little differently. However, occasionally EPS malfunctions occur as a result of damage to the steering wheel or arch.
EPS Hyundai: What does that mean?
An lighted EPS light might be present in electronic power steering (EPS) systems instead. There is no need to monitor the fluid levels because EPS systems do not require fluid to assist with steering.
Can EPS prevent a car from starting?
My old automobile had hydraulic power steering; my current car has electric power steering. If I have electric power steering, should I be worried about problems with my car not starting?
In less than two minutes, find out if your auto insurance is being overcharged.
Technically speaking, the electric power steering has the ability to stop the car from starting. Electric power steering, unlike hydraulic power steering, draws its energy from the battery, and if it uses too much of it, your car might not start.
You should have your battery checked out right away if your car won’t start because the electric power steering is using too much of the battery’s energy. After all, your car’s battery powers all of its electrical systems, not simply the power steering system.
Finding the greatest bargain on auto insurance doesn’t have to be difficult, even though troubleshooting automotive problems can be frustrating. Join the Jerry app right away.
Jerry is an app that performs the duties of a certified broker by gathering and evaluating quotations from the best national insurance providers so you don’t have to.
Every time your policy is up for renewal, Jerry will send you new quotations, ensuring that you always have the coverage you need at the lowest possible cost. Jerry will gather and examine all of the data from your current insurance in less than 45 seconds to find you the best quotes at the best price.
Can I operate my vehicle with the EPS light on?
I’m here. You should be able to continue driving your Hyundai until your appointment as long as there are no adverse side effects and you feel it is safe to steer. Thank you for your inquiry!
Hello, and I appreciate your letter. The EPS (electric power steering) warning light indicates a problem with the system that the computer has identified. Your technology differs from conventional power steering systems in that it does not use fluid and gears. That could indicate a problem as minor as a filthy electrical connection, serious as a faulty sensor, as minor as a whole system failure. You can assess the problem’s seriousness the best. Do you experience any power steering problems? Has the steering grown more difficult or jerky, or does the system make any odd noises? If not, it is probably safe to drive the car for brief, modest distances. Remember that the problem could get worse and turn into something that could leave you stuck. Of course, there is a serious safety problem here.
What is the mechanism of EPS power steering?
The vehicle steering is controlled and supported by the EPS with the help of an intelligent electric motor. The control unit determines the ideal steering support based on the steering signal from the torque sensor and delivers the information to the electric motor to offer the required assistance.
All standards for passenger car classes and even light commercial vehicles are covered by the EPS variations. The motor torque is transferred differently depending on the variation.
The EPS may support a variety of vehicle parameters in addition to calculating the steering assistance based on the steering torque. In order to connect the electronic control unit to other vehicle systems and components, Bosch has created an intelligent steering concept that includes both of these elements.
The EPS light turns on for what reason?
When there is a problem with the vehicle’s electronic power steering system, the EPS light illuminates. The warning light will turn on to alert the driver that the vehicle has electronic power steering if the computer detects a problem with the system (EPS)
Low battery life may impact EPS.
Since the power steering is an electrical system, a battery issue could have an impact on the power assistance. Without power assistance, you should still be able to control the steering. Braking won’t be impacted by it.
Does fluid exist for electric power steering?
Electric power steering has increasingly been the standard for cars since the early 2000s. This is mainly due to the fact that EPS systems are typically more straightforward and maintenance-friendly than their hydraulic counterparts. Electric systems are more fuel-efficient than hydraulic ones since they do not require power steering fluid to function and just draw power when necessary.
Additionally, EPS makes it possible for contemporary driver-assist systems on which we have come to rely, such automatic parking and lane-keep assistance. As we approach the era of autonomous vehicles, it will also become increasingly important.
When compared to hydraulic power steering, EPS is better at correcting for wheel misalignment and adverse road conditions including high winds and uneven terrain. Additionally, because the system is entirely electronic, it is simpler to modify the software to improve the accuracy of the power assistance.
What occurs if the electronic power steering malfunctions?
When it occurs, the steering system in your automobile will go back to manual operation (i.e., your muscles do all the work). As a result, turning the steering wheel will be exceedingly challenging. When electric power steering fails abruptly, it can make a car exceedingly challenging to drive.
What causes issues with electric power steering?
The mounted electric motor may malfunction in today’s computerized power steering systems. The failure modes are particularly likely to be caused by the motor becoming overheated. EPS failure will also probably result from water, dirt, or other contaminants getting into the system environment. Additionally, carbon contamination may cause steering failure in brush style systems exclusively. Brush type generally has a higher failure rate than brushless.