ADVICE: Despite Honda’s claims, we considered the Rancher 420’s 3 quarts of oil capacity to be a tad excessive. Replace the fill cap, add 2.5 quarts, let the engine run for a few minutes, and then check the level. Don’t screw in the fill cap before checking the oil level in the engine.
In This Article...
How much oil should I put in my 2020 Honda Rancher 420?
I’m happy to see you carrying out some preventative maintenance! If you want to keep your ATV functioning properly for a long time, it is imperative that you take care of it.
For your motorcycle, Honda GN4 10W-30 4-stroke oil is a fantastic option. If you can’t find that, any 10W-30 or 10W-40 motorcycle oil will do.
Never use automobile oil in your Rancher, please. The clutch will slide and deteriorate more quickly than usual as a result.
Your Rancher’s oil should be changed according to Honda’s recommendations every 12 months, 100 hours, or 600 miles, whichever comes first.
Have fun four-wheeling, but have you considered your insurance before you head out onto the trails?
ATV insurance is offered by numerous auto insurance providers, including Progressive and Allstate. Jerry can assist you in comparing costs and coverages, and for the greatest savings, you may even combine your ATV and auto insurance policies.
Jerry is your all-star auto insurance agent for life. Jerry is an app, so there’s no need to sit across from him at a desk! After signing up, you’ll receive competitive rates from a wide range of leading suppliers in less than a minute. Save money with Jerry and don’t lose coverage.
A Honda Rancher 350 should be filled with what kind of oil?
NOTE: Watch out for the spring in the filter cover behind the filter popping out with the old filter. To help you install the replacement filter correctly, Honda labels which side of the oil filter faces out.
Step 8: Replace the oil filter cover, then hand-tighten the 8mm bolts. To prevent leaks, use your socket and ratchet to evenly tighten each screw.
NOTE: The spring beneath the oil filter may require some pressure to be applied to the lid in order to thread the 8mm bolts.
9. Use the fill port on the left side of the engine, which is located opposite the dipstick port on the right, to add Honda 10W-30 motor oil to the engine.
NOTE: The Honda Rancher 350 only requires slightly more than 2 quarts of oil, so start with that amount.
Step 10. After letting the engine run for a while, check the dipstick to determine the exact oil level. If necessary, top off the oil to the proper level.
Doing your own oil change save money?
When comparing the costs of having this service performed at an independent shop or oil change chain versus doing it yourself, if you drive one of the more well-known mainstream vehicles and typically get two or three oil changes per year, you’re likely to save on average less than $20 per oil change. Your savings from doing it yourself will take some time to materialize if you have to go out and get any necessary tools or equipment. Of all, a DIYer could incur significant repair costs with just one tiny error.
Appointment-free oil change services are widely available in most urban areas (even small ones), and many factory dealerships now provide quick-lube services. These services are convenient and time-saving. Most vehicle oil changes can be finished by a skilled lube technician in less than 30 minutes, and they usually always have all the necessary fluids, filters, and accessory parts on hand.
Should an oil filter be prefilled?
Your personal preference and the kind of vehicle you drive will determine this. If you have a large, heavy-duty truck, pre-filling the filter makes the operation simpler; however, if you’re just changing the oil in a smaller automobile, it’s not required.
Is hand tightening an oil filter acceptable?
Yes, you can manually tighten the oil filter. It is quite acceptable to tighten it with your hands; however, you must take care to avoid overtightening in order to prevent leaks or damage.