- Hood is open. The hood release on your BMW 3-Series can be found underneath the dashboard. When you hear the BMW hood pop open, pull the lever.
- The hood safety clasp at the front of the car must then be released. The hood should be raised and locked open.
- the Coolant Reservoir’s location. The BMW’s coolant reservoir (tank) can then be found. Here, you may check the coolant level and top it out if necessary. The coolant expansion tank is found on the driver’s side of the engine in a 3-Series. Slowly remove the cover. Only after the engine has cooled should you open the cap.
- Remove cap to check the coolant level in a BMW 3-Series. Observe the low and high levels in the coolant reservoir tank. You must replenish coolant if the level falls below the minimal level, or your 3-Series risked overheating. The floating gadget is used by the BMW 3-series to gauge the coolant level.
- Add antifreeze and engine coolant. Only use the BMW-recommended coolant type.
- 316i
- 318i
- 320i
- 323i
- 325i
- 325xi
- 328i
- 328xi
- 330i
- 330xi
- 335i
- 335is
- 335xi
- 320d
- 320xd
- 325d
- 330d
- 330xd
- 335d
- M3, M3 GTS
The 2004–2013 BMW 3-Series Check Level & Add Coolant instruction is intended to be helpful. For additional assistance with your BMW, consult these troubleshooting and repair instructions.
In This Article...
Where is the coolant for the 2017 BMW X3 located?
On the driver’s side of the engine, close to the air filter assembly, is where you’ll find the 2017 BMW X3 coolant reservoir. The coolant reservoir will have a black lid with inscriptions on it that will also show You the proper coolant that the manufacturer recommends for the vehicle. Always clean off the reservoir and cap before opening it to prevent contaminates from entering the coolant. You should utilize the fill level line to compare to the fluid and ensure that it is at the proper level. Hybrid Organic Acid Technology is the advised antifreeze or coolant for the car. Extended Life for European Vehicles in Violet. According to the factory specs, the engine coolant’s fluid volume is 7.5 liters.
On the driver’s side of the engine of the 2017 BMW x3, you’ll find the coolant reservoir. It appears to be a ball of black with a black cap.
BMW needs coolant, right?
Antifreeze and coolant Any generic antifreeze won’t work since BMWs have unique coolant specifications (nitrite and phosphate free) to prevent build-up and corrosion of metal components.
For a BMW, what kind of coolant do I need?
For BMW vehicles, the ZEREX G-48 coolant is perfect. The coolant, which is made for both diesel and gasoline engines, contains low-silicate, pH, anti-phosphate technology that guards against corrosion in all metals, including aluminum.
It is diluted at a 1:1 ratio to protect the modern engine’s components from freezing in the winter and boiling over in the summer. Additionally, the combination is prepared in 5:7 ratios for maximum protection. It also includes a high-quality defoamer system and contains less silicon than the vehicle’s mandated 250 parts per million.
Why is the coolant in my BMW low?
You should take your automobile to the automotive service shop as soon as possible for an inspection and maintenance if your coolant is low because it could be an indication of a larger issue. Some of the causes of a possible coolant shortage in your car include the following:
- reservoir leak or overflow tank
- a radiator leak
- radiator hose leak
- water pump leak
- cracked or compromised radiator seal
- defective head gasket
How does a BMW’s coolant light appear?
To keep your engine from overheating, coolant fluid absorbs the heat from your engine and distributes it through the radiator.
When coolant levels are low, this yellow warning light will illuminate to prompt you to top them off.
Avoid taking any lengthy trips without enough coolant; instead, stop as soon as you can and top it off to prevent major damage to your vehicle. Before topping off, let the engine to cool. Get your car serviced if this light appears frequently to be sure there isn’t a leak.
How often is coolant required for a BMW?
Typically, every 30,000 miles or every two years, you should have a BMW coolant cleanse conducted. Your car may be able to go longer between flushes in specific circumstances.
What is the lifespan of BMW coolant?
How frequently should a BMW have its coolant changed? Typically, every 30,000 miles or every two years, you should have a BMW coolant cleanse conducted. Your car may be able to go longer between flushes in specific circumstances.
Why is blue coolant used by BMW?
To maintain your cooling system operating at its peak, use only German OEM engine antifreeze, component number 82141467704. (82 14 1 467 704). Because they don’t include nitrites, amines, phosphates, or borates, BMW exclusively suggests specific coolants. BMW cooling systems typically do not work with off-the-shelf coolant from a neighborhood parts store, and mixing various coolant formulas is not advised (in a pinch you should use distilled water).
The well-known blue coolant, which has been in use since the 1990s, is only permitted for vehicles with model years up to 2018. Internally, it is referred to as the G48 formula and is exclusive to BMW/MINI vehicles. In comparison to other forms of coolant, the blue coolant formula is a hybrid that extends coolant service life and is less harmful to the environment. On vehicles manufactured in 2018 and later, BMW replaced it with a new formulation that contains silicate and offers superior immediate corrosion protection. BMW does not advise using the older blue formula for vehicles created after January 2018.
For increased corrosion resistance, anti-freeze defense, and water pump lubrication in street cars, we advise combining distilled water in a 1:1 ratio with the mixture. Reduce the amount of antifreeze in your coolant mixture if you want more cooling properties, but only in warmer climates where freezing is impossible (see chart below). We advise monitoring the freezing point of the coolant mixture if you want to use antifreeze and water ratios other than 1:1.
Red Line Water Wetter can also be added if high temperatures could lead to engine banging or pre-ignition.
- BMW # 82141467704, genuine German OEM antifreeze
- optimum cooling, freeze prevention, lubrication of the water pump, and corrosion resistance
Can I use water in my BMW instead of coolant?
Your radiator system becomes more contaminated when you use water. Although using water instead of low coolant is significantly better for the engine, you should switch the water out as soon as you can for the proper coolant for your car.
Any remaining coolant in the radiator is diluted when water is added to it. Preventing corrosion, raising the boiling point of water, and reducing the freezing point of water are just a few of the crucial jobs that coolant does. While using water in place of the coolant will allow you to drive the automobile for a brief period of time, your engine won’t be adequately protected.
This means that the radiator needs to be filled with a 50/50 mixture of coolant and water as soon as the issue that led to a low coolant level is resolved.
Should I combine water and BMW coolant?
Keep your cooling system operating at its peak performance by using BMW engine coolant (antifreeze). This 1-liter bottle works well for little top-offs of coolant that has been lost. For the best defense against boiling, freezing, corrosion, and lubrication, coolant is mixed with distilled water. For the optimum protection in street cars, mix distilled water with antifreeze 1:1. Reduce the amount of antifreeze in your coolant mixture if you want more cooling properties, but only in warm climates where freezing is not an issue. We advise monitoring the freezing point of the coolant mixture if you want to use antifreeze and water ratios other than 1:1.
Red Line Water Wetter can also be used with pre-ignition if high temperatures could lead to engine knocking.
Can I simply top off my car’s coolant?
Add the proper coolant to the reservoir if the coolant level is low (not the radiator itself). Either diluted coolant alone or a 50/50 blend of concentrated coolant and purified water are acceptable. Replace the cap and tighten it until you hear it click when the coolant reaches the cold fill line.
Is antifreeze the same as coolant?
Antifreeze, commonly referred to as engine coolant, is combined with water to prevent the radiator from freezing in extremely cold weather and overheating in extremely hot weather. Knowing which coolant type is best for your automobile or truck is crucial because there are numerous varieties available.
Can I add more coolant on my own?
It’s easy to top off the coolant in your engine by opening the reservoir cap; just make sure the engine isn’t running too hot and open the cap with a cloth wrapped around it in case there’s any trapped pressure. What you use to do this, though, is crucial.
- Use a quality engine coolant that you can purchase at an autocenter or local dealer. Simply adding water is not advised since any minute organisms or impurities could accumulate inside your engine and cause the coolant pipes to ‘fur’ up, thereby obstructing the internal waterways. If that’s all you have, it’s still preferable to use ordinary water rather than letting your coolant level get too low.
- Using distilled water instead of store-bought coolant is an option. Since this has been cleaned, it is free of the impurities that can harm your pipes.
Why does the coolant level decrease?
The majority of the time, leaks in the cooling system, such as those in the hoses, radiator, or radiator cap, are the cause of your car’s coolant level lowering. A rising temperature gauge, a sweet smell (antifreeze smell), issues with your car’s heater, or higher fuel usage could be signs of this.
If your coolant level dips, always go to a professional to get it fixed. Simply topping off your coolant should never be used as a temporary fix for leaks.
How long can you keep your coolant low?
How long can an engine run without coolant? is a question we hear a lot. Maybe answering this issue will be simpler now that you are aware of how crucial radiator coolant is. It is dangerous to drive a car with low or no engine coolant since it could harm some of the engine’s secondary and even primary components. It is preferable to stop if there is insufficient coolant in the vehicle. Even a brief drive in such a vehicle is not recommended because it could seriously harm the engine of your vehicle and incur expensive repairs.
Many new and modern automobile brands have a cut-off feature that checks the engine temperature and detects a lack of coolant. This detection feature turns off the car engine to guard against potential engine damage if there is a shortage of coolant in the cooling system of the car and, as a result, a perception of a significant increase in engine temperature.
However, if you drive an older vehicle, you must be aware of the symptoms of a coolant shortage to save your engines from overheating, seizing, or bursting a gasket. The following is a list of some of the most frequent cooling system parts that sustain the most harm when the cooling system overheats and runs out of coolant:
- water meter
- head seals
- engine timing for the cylinders and pistons
- piston head
- twisted or warped connection rods
- Crank failure
Repairing or replacing these parts is quite pricey. Therefore, try to avoid allowing your car’s cooling system to overheat due to a shortage of coolant.
How far can a car be driven without coolant, then? You can continue driving for a while if your car’s coolant level is low. Really, it depends on the coolant level. You can drive your car for a few days if it is low but still higher than the required amount. However, if the level is below the minimum, kindly do not even attempt to start your engine.