Advanced Full Synthetic 0W-20 Motor Oil, 5 Quart, Valvoline (Part No. 881150)
In This Article...
A Honda Accord Sport uses what kind of oil?
The same kind of fuel is required by both of the Accord’s various engine configurations for this model year. That oil is completely synthetic SAE 0w-20. Consult the owner’s manual for the 2019 Honda Accord for more detailed information. You should check there to find all the information you require about your car.
Open the hood of your car if you still need some assurance. The oil type is frequently printed directly on the motor oil cap next to your engine. That may provide you some extra information.
Need synthetic oil for a 2017 Honda Accord?
For the 2017 Accord’s engine to run at its best and last the longest, full synthetic oil is advised. Depending on the engine, a car’s oil capacity ranges from 3.7 quarts for a 2.0L (122 ci) four-cylinder engine to 4.4 quarts for a 2.4L (144 ci) four-cylinder engine to 4.2 quarts for a 3.5L (213 ci) V6 engine.
It’s a good idea to educate yourself on potential vehicle maintenance requirements so that you can keep your 2017 Honda Accord in top condition for as long as feasible. We’ll examine the distinctions between synthetic and conventional oil changes in this post, as well as the reasons why it’s crucial to understand how much oil your car requires for maximum performance.
What type of oil change is required for a 2017 Honda Accord?
For traditional oil, Honda advises changing your 2017 Honda Accord’s oil and filter every 3,000 to 5,000 miles. One of the most fundamental and important maintenance for your car is an oil change. A change of synthetic oil should be made every 7,500 to 10,000 miles.
What is engine oil 0W-20?
A winter viscosity multigrade SAE oil, 0W-20, lubricates your engine parts in cooler climates and offers outstanding cold start performance.
In cold climes, 0W-20 oil is very thin and flows very freely without creating any friction. It also runs very smoothly and lubricates crucial engine components at normal operating temperatures.
Additionally, this multigrade oil functions well even when the engine temperature is adjusted to relatively high levels. It may not provide as thick an engine protection barrier as 0W-30 or 5W-40 oil, but it is still regarded as a good option for seasons.
Honda advises using synthetic motor oil?
Can I run my Honda engine on synthetic oil? Motor oils made of petroleum are used to lubricate Honda engines throughout development, testing, and certification. Synthetic oils are permitted, but any motor oil used in our engines must adhere to the owner’s manual’s oil specifications.
How often should an oil change be performed on a 2017 Honda Accord?
One of the most important and time-consuming services for your car is an oil change. Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles. For traditional oil, Honda advises changing your 2017 Honda Accord’s oil and filter every 3,000 to 5,000 miles.
How much oil does a four-cylinder 2017 Honda Accord require?
The 2.4-liter, four-cylinder engine of the 2017 Honda Accord can hold 4.4 quarts, or 4.2 liters, of oil.
Remember that an engine’s oil capacity is not the same as its displacement. Oil capacity is the amount of oil needed for a proper oil change, whereas displacement is the amount of oil required for the cylinders to operate.
Do not mistakenly believe that the terms “engine displacement” and “oil capacity” are synonymous.
What kind of oil does a 2017 Honda Accord need?
Now that we know exactly how much oil your Accord requires, let’s speak about the kind of oil you must use. Don’t just walk into the auto parts store and grab the first jug you see because not all engines utilize the same type of oil.
You must use premium-grade 0W-20 oil in your 2017 Accord as per Honda’s advice.
But what do those characters represent? Winter is indicated by the W, and the numbers refer to the viscosity (thickness) of the oil.
The 0 before the W denotes that the oil has the right viscosity at 0F and below, while the 20 denotes that it can continue to function properly even at very high temperatures of up to 212F. Your engine will endure less wear and tear if you use this type of oil.
As a point of reference, if you ever see oil labeled as detergent motor oil, it contains chemicals to lessen corrosion accumulation in your engine.
How can the oil life of a 2017 Honda Accord be reset?
Well done for keeping up with your car’s routine maintenance! The oil life indicator was most likely simply not reset following the oil change by your mechanic.
Follow these instructions to restart the oil life on a 2017 Honda Accord Hybrid:
- For 10 seconds, hold down the TRIP button.
- A key is turned to the ON position.
- As soon as OIL LIFE begins to flash, let go of the button.
- To select OIL LIFE, press the TRIP button on the instrument cluster.
- To immediately reset the oil life, hold the TRIP button for an additional 5 seconds.
Your oil life percentage should reset from 20% to 100% if everything went according to plan. The next time you get an oil change, be sure to check and reset the oil life.
Since you’re already taking the effort to reset your oil gauge, why not use the Jerry app to save a little more money on your auto insurance?
Jerry, a certified broker, aids in finding and comparing quotations from more than 50 top suppliers in a short period of time. Jerry can assist you with purchasing your new coverage and even canceling your old policy when you discover a lower rate for your Honda hybrid.
How is synthetic oil produced?
Even if synthetic oil has certain man-made components, it is still oil. A base oil, powder additives, and a carrier oil that ensures an uniform dispersion of the additives are used to create synthetic oil.
Oil used for refining is used to make both synthetic and conventional motor oils. Most synthetics start out as highly refined crude oil that is extracted from the ground. It comes from the same place as regular oil. Other synthetic oils employ a synthetic oil or intentionally created chemicals as their basis oil. The degree of refining is where synthetic oil and conventional oil differ most significantly.
The base oil is one of a number of “oil classes, ranging from mineral oils produced from crude (Group I and II) to wholly synthetic, compound-based oils” (Group V). All oil grades are produced using performance-enhancing additives.
Scientific control over molecular size and purity is also a product of refinement procedures and constituents. This can improve performance by decreasing sludge buildup and friction.
Synthetic oil technological advantages include:
- Less friction is caused by uniform molecule size.
- Engineering and refinement lessen deposits
- less contaminated and cleaner oil
- Additives can clean engines and provide boost protection.
- improved performance in cold and harsh conditions
The first synthetic oil was created in 1929. It has been improved with technology and resources to accommodate aircraft, high-performance automobiles, and typical consumer vehicles. Nazi Germany campaigned for synthetic oil to power their troops, for example, when the Allies forced oil shortages on Germany during the Second World War. During the American Energy Crisis of the 1970s, there was a significant effort made to increase fuel efficiency by developing superior synthetic oils.
Technological advancements have also increased the demand for synthetic oils. High-performance machinery and vehicles, such as sound-beating airplanes and industrial plants, must function in harsh environments. Engine oil that has been highly refined enables improved temperature resistance.
Your Owner’s Manual
Although it’s really easy, owners manuals are frequently disregarded. To find out the appropriate viscosity of the motor oil you should use, always consult your owner’s handbook. Use the 0W20 and 5W20 variations interchangeably, depending on the weather, if they are both on the list.
Location
Given that both 0W20 and 5W20 motor oils operate in much the same temperature range, it is critical to think about where you will be using the car. The operating temperature range for synthetic oil is -40C to 20C for 0W-20 and -35C to 20C for 5W20 (5W20 synthetic oil). Being aware of these facts means two things:
- In places like Florida when the temperature is above 20C/68F, you cannot use either 0W20 or 5W20.
- If you reside in a region with extremely low temperatures, such as Alaska or Maine, it is preferable to use 0W20 oil.
Viscosity
The motor oil will flow more smoothly the lower the number is. At beginning temperatures, a 0W20 will be more fluid than a 5W20, but both will function similarly at normal engine operating temperatures. Keep in mind that engine oils naturally become thinner during heating and thicken while cooling.
Quality Testing
Any oil brand with the appropriate viscosity grade and the API donut symbol is acceptable. The oil has passed the testing required for SL service, as indicated by the starburst sign.
The API donut indicates that your motor oil passed the current SL service rating test after being tested by the American Petroleum Institute. ACEA (Association des Constructeurs Europeens d’Automobiles) is the counterpart of API in Europe.
Manufacturer Requirements
If your vehicle is substantially loaded, the machine designer would typically advise using an oil that has a high viscosity and is heavy like honey. However, if it moves quickly, a lubricant that can move out of the way and then move back in is preferable.
Fuel Economy
Despite the fact that both 5W20 and 0W20 (0W20 synthetic oil) can be used at 20C/68F, 0W20 is thinner than 5W20 at cold engine temperatures, particularly in the initial minutes after starting your automobile. Because it gives the car slightly higher fuel economy than the 5W20, new models specify it. The 0W20 model satisfies a turbo-diesel engine’s requirements as well.