Advanced Full Synthetic 0W-20 Motor Oil, 5 Quart, Valvoline (Part No. 881150)
In This Article...
The amount of oil a 2016 Honda Accord consumes
The engine oil capacity of the 2016 Honda Accord is 4.2 quarts. After the old motor oil has been completely drained out during an oil change, you or your service professional will add 4.2 quarts of fresh oil. Between oil changes, this level will naturally decrease a little due to regular driving circumstances.
By checking it frequently—once a month is plenty, or every time you fill up your gas tank—you can ensure that your oil level is still within the recommended range. Make that the engine oil dipstick shows a suitable amount of oil. If not, before our next oil change, you might need to top it out a little.
What kind of oil does a 2016 Honda Accord need?
For your Accord, Honda suggests using Genuine Honda Premium Grade 0W-20 Motor Oil. Although it’s always ideal to follow your manufacturer’s recommendations, if you need to add or change your oil and are unable to obtain Genuine Honda motor oil, the same oil type is available under other brands.
We might recommend Valvoline Advanced Full Synthetic 0W-20 Motor Oil or Mobil 1 Extended Performance Synthetic Motor Oil. Just be sure you always purchase type 0W-20 engine oil.
Here’s a quick explanation if you’re not sure what 0W-20 signifies or why it’s so significant:
The 0W in your oil type stands for two things: the viscosity of the oil or the liquid thickness in cold weather. Your motor oil has an extremely thin viscosity in cold temperatures if the viscosity level is zero.
When the engine of your car reaches 212 degrees Fahrenheit, which is its typical working temperature, the viscosity of the oil is rated at 20.
What type of oil change is required for a Honda Accord?
Typically, synthetic oil needs to be changed every 7,500 to 10,000 miles. For traditional oil, Honda advises changing your 2020 Honda Accord’s oil and filter every 3,000 to 5,000 miles. One of the most fundamental and important maintenance for your car is an oil change.
Can I substitute 0W-20 oil for 5w20 oil?
My car is intended to use 5W-20 motor oil, a reader writes. I unknowingly purchased 0W-20 and changed my oil without realizing it. Is it okay to keep using the 0W-20?
Our response: 0W-20 is typically a completely suitable replacement for 5W-20. Both goods are 20-weight motor oils when used in normal conditions. However, if the car is still covered by warranty, employing 0W-20 might not be appropriate in your situation (see more below).
What is engine oil 0W-20?
A winter viscosity multigrade SAE oil, 0W-20, lubricates your engine parts in cooler climates and offers outstanding cold start performance.
In cold climes, 0W-20 oil is very thin and flows very freely without creating any friction. It also runs very smoothly and lubricates crucial engine components at normal operating temperatures.
Additionally, this multigrade oil functions well even when the engine temperature is adjusted to relatively high levels. It may not provide as thick an engine protection barrier as 0W-30 or 5W-40 oil, but it is still regarded as a good option for seasons.
How often should the oil be changed in a Honda Accord?
We advise changing the oil in vehicles utilizing synthetic oil every 7,500 miles or every six months, whichever comes first. Oil changes for traditional oil-powered vehicles should be performed every 3,000 miles or three months, whichever comes first.
Honda Genuine Motor Oil: What Is It?
For the best possible engine protection in Honda and Acura cars, Honda Genuine Synthetic Blend Motor Oils are premium quality, all-season synthetic blend engine oils. They transcend the standards set by Honda and Acura to further prevent damaging engine deposits and increase fuel efficiency. Honda R&D tests and certifies its motor oils.
Honda Genuine Synthetic Blend Motor Oil is designed to withstand viscosity and thermal breakdown even under extreme service conditions, to offer exceptional wear protection, and to reduce the production of sludge and varnish. It also has strong foam resistance and safeguards against rust and bearing corrosion. In comparison to conventional engine oils, the part-synthetic formulation offers improved oxidation resistance, thermal stability at high temperatures, and better pumpability at low temperatures, providing additional protection under all driving circumstances.
The performance standards for gasoline engines set out by API SN and ILSAC GF-5 are exceeded by Honda Genuine Synthetic Blend Motor Oil. It is “Resource Conserving for better fuel efficiency and protection of catalysts in emissions control systems.
except for the RDX, Honda and Acura cars
Honda Genuine Synthetic Blend Motor Oil goes above and beyond:
- GF-5 ILSAC
- API Service SN that Saves Resources
- Excellent thermal breakdown and viscosity resistance at high temperatures
- reduces wear to extend engine protection
- Excellent pumpability at low temperatures
- exceeds ILSAC GF-5 requirements for new car warranties
- prevents the buildup of sludge and varnish
- designed specifically for Honda and Acura automobiles
- Resource conservation to safeguard emissions systems and improve fuel efficiency
- Low volatility for less reliance on oil
Castrol oil: Is it safe for Hondas?
The only oil line Honda recommends in Europe is Castrol EDGE Professional H and Honda Genuine Oil, which is sold through Honda’s dealer network. Honda and Castrol have a lengthy history together in the worlds of racing, motorbikes, and cars.
What is the best oil brand for Honda?
Honda Genuine Motor Oil is made especially for your car because it satisfies American Honda’s strict engineering requirements. These requirements are on par with or better than many traditional fluids’ normal industry performance specifications. Honda Genuine Motor Oil, tried and true by American Honda’s Research & Development team, aids in keeping your Honda in line with its factory specifications.
Honda Genuine Motor Oil, offered and accessible at Honda dealers, is advised by American Honda. If conventional motor oil of a premium grade or an ultimate full synthetic mix is used instead of Honda Genuine Motor Oil, it must have the necessary viscosity grade listed in your Owner’s Manual. Additionally, the oil must be marked with an API Certification Seal, which certifies that it complies with the most recent API requirements and that it is energy-efficient. Oil additives are not necessary and are not advised; using them could have a negative impact on the durability and performance of your car’s engine.
For a list of fluids recommended by the manufacturer, please refer to your owner’s manual’s Recommended Engine Oil.
What does a Honda Accord have a high mileage?
This question can be viewed in two different ways, and as a result, there are two potential responses. Some people define a high-mileage car as one that has been driven much more than typical.
An average US driver logs 14,000 miles a year. The Honda Accord is a high mileage Honda if the odometer shows a reading that is significantly higher (after dividing it by the Accord’s age). Similar to this, a low mileage Accord is one that has been driven considerably fewer miles than its average yearly mileage.
On the other hand, some individuals think that an Accord’s actual mileage is a good predictor of whether it is a high mileage car or not. Some people think that once a car has been driven 100,000 miles, it has reached the end of its useful life.
However, because to improvements in manufacture, assembly, and quality control, modern cars can travel 200,000 miles without experiencing any major problems if they are properly maintained.
An Accord should last up to 300,000 miles or more, which translates to about 22 years of use. Therefore, an Accord that has traveled more over 300,000 miles or 22 years can be deemed excessive mileage.
What is 0W-20 detergent oil of excellent grade?
The oil’s viscosity at startup when the engine is cold, “W stands for its winter certification, and “20 is the viscosity at higher temperatures, according to the breakdown of the 0W-20 code. Oil with a lower number is thinner and has less friction. Martin claims that lower cold-start emissions are a further benefit of the thinner oil during beginning.
Is 0W20 harmful to engines?
an inquiry from a reader “For my new pickup truck, the recommended engine oil is 0W-20. This is a significant adjustment for me because I have never owned a car that required anything other than 5W-30. 0W-20 oil appears excessively thin, and I have serious doubts. I requested that my dealer allow me to use at least 5W-20, but they claim that 0W-20 must be used in order to keep my warranty in effect. For my new engine, is 0W-20 safe?
Answer: Without a doubt, 0W-20 is safe for your engine. Since the beginning of the previous decade, manufacturers have required 5W-20 and 0W-20, and there is absolutely no proof that engine wear rates have gone up. Engine wear has never been lower because of the enormous advancements made in the last 15 years in engine designs, materials, and motor oil chemistry. The 5W-20 and 0W-20 grades are quickly replacing the 5W-30 grade in new cars. A brand-new car with the specification 5W-30 will be uncommon by the end of this decade. In fact, in the upcoming years, anticipate to see even lower viscosities, such 0W-16.
Why do auto manufacturers advise using thinner motor oils? merely to maximize fuel efficiency. However, this pattern has persisted long enough for us to draw the conclusion that there are no negative effects in terms of shortened engine life.
Regarding the second half of your query, which asks whether it is advantageous to use 5W-20 instead of the advised 0W-20, we see no justification for doing so. Let’s utilize the characteristics of the 0W-20 and 5W-20 AMSOIL Signature Series oils to demonstrate our point.
The measured in is the industry standard for assessing viscosity at operational temperature “at 100C, centistokes.
- 8.7 centistokes for AMSOIL Signature Series 5W-20.
- 8.8 centistokes for the AMSOIL Signature Series 0W-20.
The 0W-20 and 5W-20 are consequently nearly equal in terms of thickness or viscosity at working temperatures. Because it would provide a very minor increase in terms of cold weather start-up protection, the car maker chose a 0W-20 oil.
We choose a 0W-20 for year-round use even though our daily driver requires a 5W-20 in order to have the optimum start-up protection. Even in sweltering weather, we observe absolutely no oil usage in between oil changes.
In conclusion, you may be sure that a high-quality 0W-20 motor oil will provide the best wear control. Enjoy your new truck, and you may use 0W-20 motor oil with confidence.
Which is preferable, 5W 30 or 0W-20?
Pay particular attention to the quality testing done while selecting a motor oil. Both the API donut and the starburst sign should be visible on the packaging.
The American Petroleum Institute’s testing was successful, as evidenced by the API donut. The starburst is also used to demonstrate eligibility for SL service.
Location
You must take the region into account while selecting the ideal oil viscosity from the suggested possibilities. For instance, 5W20 can be used in somewhat warmer settings while OW20 will perform better in cold climates like Maine or Alaska.
Having knowledge of the temperature range aids in selecting the proper oil. The temperature range for 0W-20 oil is -40 to 68F. In contrast, the operating temperature range for 5W20 oil is -31F to 68F and for 5W30 oil is -31F to 104F.
Fuel Economy
Because the lubricant flows more easily, the higher the fuel efficiency, the thinner the oil viscosity. As a result, 5W20 will run similarly to 0W20 once the engine has warmed up, but 0W20 will be more fuel-efficient during startup.
In both colder and warmer climates, 0W20 offers greater fuel efficiency than 5W30. However, 5W20 only performs better than 5W30 in hotter environments.
You can give the engine the protection it needs to last longer by using the proper oil in it. Make sure you do your study before selecting oil to attain the performance level you need.