The Engine Control System, which keeps an eye on various emission control system components, includes this indicator light. If this light comes on while you’re moving, it means that the emission control system may have detected a potential issue.
In This Article...
What should you do if the malfunction indicator light comes on?
When their car’s dashboard’s Malfunction Indicator Light turns on, people typically become interested in the On-Board Diagnostics. The Check Engine Light is another name for the Malfunction Indicator Light (MIL). This warning light’s function is to inform the driver about a car fault that has been identified.
When there is an issue with the car’s engine, transmission, or emission control system, the OBD2 system turns on the light. You shouldn’t turn a blind eye to the light because it is only on for a reason. The cause should always be looked into.
Malfunction indication light (MIL) on a Hyundai Elantra (check engine light)
The Engine Control System, which keeps track of different parameters, includes this indicator light.
shows that a probable issue has been found with the emission anywhere.
after the engine is started, and will extinguish shortly. If the light is on
OFF position, send your car to the nearby HYUNDAI dealership to have
Generally speaking, you can still drive your car, but get the system checked.
damage to the emission control systems that can affect fuel efficiency and/or drivingability
Damage to the converter is possible. Engine power could be lost as a result of this. hold the
Quickest possible Engine Control System inspection by a certified HYUNDAI dealer.
Fuel should be added as soon as you can. driving while the fuel-level indicator is on
should sound after around three seconds. When turned on, the ESC tracks the
Causes of Check Engine Light Illumination
Whether your check engine light is solid or flickering may indicate the cause of the illumination. For instance, if the check engine light is on completely, it is probably alerting you to an engine emissions issue. However, if the light is flashing, it can point to a much worse issue.
Why does the malfunction indication light come on?
It is an indication that something is wrong from the vehicle’s engine computer and was formally known as the malfunction indicator lamp. The light could indicate a simple problem, like a broken gas cap, or a more significant problem, such an engine that is misfiring.
Can you operate a vehicle when the malfunction light is on?
Avoid driving at high speeds and accelerating fully. Even though it may go off as you continue to drive, if this indication comes on regularly, you should also have the dealer evaluate your automobile. You risk damaging your vehicle’s emissions system and engine if you continue to drive with the malfunction alert lamp on.
How critical is an indicator lamp that’s broken?
Flashes from time to time are an indication of momentary engine issues. In this situation, it is wise to be aware of potential concerns that may arise in the future and subsequently develop into more serious ones.
The indicator light staying on continuously is the most typical scenario. It suggests a more serious issue that needs to be addressed; the sooner the better. However, occasionally minor problems might still have an impact on a vehicle’s emissions, for instance.
When the MIL flashes continuously, signaling is at its worst. It is a symptom that the engine in your car is misfiring. The problem is significant, and you need to turn off the engine right away to avoid more harm. For instance, it might lead to an overheated catalytic converter and perhaps a fire.
Note: When you start the engine, the light will shine for a brief period of time. But if the engine is running, it ought to shut off.
How can you resolve the engine trouble light?
You might have requested for assistance with a computer problem if you’ve ever worked in an office setting with an IT department.
Probably the first thing your IT wizard asked was, “Have you tried resetting your computer?”
The analogous repair for a car’s check engine light is the on-off technique. It compels the computer to reboot and restore its previously saved state.
Simply switch the ignition on for 1-2 seconds, then off for 1-2 seconds, using your key. Three or four times through, repeat this step.
If the check engine light is still on after the reset, your car might still be having issues. Think about using the OBD2 scanner to check for the error code or taking your car to a qualified repair.
Why is the check engine light yellow?
Depending on the issue, if the check engine light comes on, it may flicker or be on all the time. A issue that requires immediate attention is indicated by a blinking light, or in some cars, a red light instead of a yellow or orange light. In either case, you ought to have the car looked at by a mechanic.
An engine misfire that is severe enough in late-model cars to send unburned fuel into the exhaust system, where it can quickly destroy the catalytic converter and necessitate an expensive repair, is typically indicated by a blinking light. If that occurs, you should turn down the engine and get the automobile or truck checked out as soon as you can.
Even if there is no immediate danger if the light is steady, you should make an appointment as soon as feasible. Even while your fuel mileage may be declining and your vehicle may be spewing unsafe amounts of hydrocarbons and other pollutants, you might not notice a decline in performance since modern automotive systems frequently try to adjust when there is a problem.
According to Jim Collins, a national training team leader for Ford Motor Co., “The customer is really, in the long run, potentially hurting their pocketbook by leaving that light on and ignoring it.” The car’s computer may in some severe circumstances lower power for you in an effort to lessen the likelihood of damage.
Here are some recommendations on what you should do if the check engine light illuminates:
- Search for a critical issue that need quick action. Look for any warning signs of low oil pressure or overheating on your dashboard in the gauges and lights. These circumstances call for you to stop and turn off the engine as soon as you can find a secure location to do so. On some cars, a yellow check engine light indicates troubleshoot, while a red one commands immediate stopping.
- Possibly tighten the gas cap. This frequently makes the issue go away. The light might not reset for a while, so keep that in mind. Some automobiles feature a secondary indicator that sounds when the gas cap is loose.
- Reduce the load and speed. Reduce your speed and make an effort to lessen the demands on the engine if the check engine light is on or you notice any major performance issues, including a lack of power. For instance, it would be wise to put an end to hauling a trailer. Get the car evaluated as soon as you can to avoid costly damage.
- If any built-in diagnostic tools are available, use them. Many contemporary vehicles feature built-in remote diagnostic capabilities that allow for reporting on fault codes and scheduling an appointment for service. Today, numerous automakers offer remote diagnostics and the option to book a service appointment, including Fiat Chrysler, Ford, Hyundai, Jaguar/Land Rover, and Volvo.
The orange engine light: what does it mean?
An engine misfire, for example, would be a problem indicated by a flashing orange light on the dashboard. Your automobile may start to tremble, or the engine sound may change unexpectedly. If this light appears, you should have your car checked out right away.
What causes the check engine light to appear most frequently?
One of the most frequent causes of the check engine light coming on is a loose fuel cap. The cap plays a critical role in the gasoline delivery system of a car. Notably, it stops gasoline fumes from escaping the fuel tank and aids in maintaining the proper pressure throughout the entire system.
Pull over and inspect the cap to make sure it isn’t loose or still on the roof of your car if your check engine light comes on right after you fill up. Sometimes the cap needs to be replaced, although it won’t have a significant financial impact. The majority of auto parts companies sell universal-fit gas caps for around $15.
When should I start to worry if my check engine light is on?
Each of us has been there. As you’re driving along, going about your business, the Check Engine light suddenly illuminates. You start to worry right away: “How much will this repair cost me?” Will my car have a serious issue with this, or can it be fixed easily? Can I continue operating my car?
The diagnostic system in your car uses the check engine light to alert you when something is wrong. This light often signifies a problem with the engine, drivetrain, or emission control systems of the vehicle.
Unless it is flashing, a Check Engine light typically does not signal an emergency warning to stop immediately lest serious damage be done. This is in contrast to a Temperature or Oil Pressure light. The check engine light flashing indicates a more serious issue. If you are towing a trailer or boat, for example, you should immediately slow down and minimize the weight on your engine. You should also make an appointment for service at a reputable auto repair shop in your area.
If you don’t have a diagnostic code reader, the check engine light will let you know that your car requires work, but that’s really all the information you can get at first. The majority of things that have an impact on the monitored systems have the potential to turn on the Check Engine light, from a simple loose gas cap or faulty spark plug to an expensive computer control module or catalytic converter.
First, check your gas cap. Many cars include an indicator for a loose gas cap that will go off before your check engine light does. The check engine light may come on as a result of fuel system vapor leaks if your gas cap is unfastened or the seal is not tight. It can take some driving and an overnight “parked” period if the gas cap on your car was loose for the light to turn off. For more information, see the owner’s manual or a qualified mechanic.
You can see that your car appears to be in perfect working order except from the check engine light. Do not wait. Driving with the check engine light on may result in catastrophic damage and more expensive repairs. Additionally, your car’s performance and fuel efficiency will probably suffer. As soon as you can, take your car to a reputable service facility.
A technician can connect equipment to a diagnostic port on a check engine light-equipped vehicle to retrieve trouble codes and other diagnostic data. The technician will then identify what caused the light to turn on and what needs to be fixed using this information, as well as, in certain situations, additional testing and diagnostics. Occasionally, if the Check Engine light has been on while driving for a while, one component’s failure can trigger the failure of other parts. Additionally, a single component failure might lead to the failure of various vehicle systems, producing a large number of fault codes. These circumstances can complicate repairs, which frequently include making one repair and then “retesting” to make sure no more repairs are necessary.
Repairs for check engine lights can cost as little as $0 (fixing a loose gas cap) to as much as several thousand dollars (buying a new catalytic converter). The sooner you get your car checked out, the less likely it is that there will be further harm. Have a qualified mechanic evaluate your car as soon as possible.
What does the phrase “engine malfunction” mean?
The flashing service engine light is a warning that the car needs repair right away. It may be anything as easy as a loose gas cap, or it might be a serious issue with the engine or pollution control system.
The engine failure light alerts the driver to any current issues with the car. For this, the control unit of your automobile has numerous sensors placed all around the vehicle that will show the levels of the vehicle and if any kind of issue has been found with its operation. Tuesday, October 19, 2000
The same advice is given by every manufacturer when the engine failure light illuminates: “Go to an internal workshop.” They have diagnostic equipment that actually asks the control unit of the car what precise defect it has found.
The MILs, or lights that indicate defects, allude to a more challenging computer-controlled system. A professional must typically examine the system to pinpoint the exact defect and make any necessary repairs. 20 years ago, in the year 2000
a list of frequently asked questions that have been submitted by our users and addressed by our specialists.