Your 2017 Hyundai Accent’s check engine light will begin blinking if there is an urgent need for repair, so you should bring your Hyundai in right away. Normally, this blinking light denotes an engine misfire that allows unburned fuel to escape into the exhaust system.
In This Article...
SERPRESULT
The check engine light alerts drivers to problems ranging from loose gas caps to more severe failures like a damaged catalytic converter or another issue.
The check engine light never goes off: The onboard diagnostic system of your car has identified a problem that needs to be rectified.
What does your Accent’s check engine light mean?
In a nutshell, it is a warning light that informs the driver of any engine issues. Some automobiles have a light that flashes red in cases of significant problems and yellow in minor ones.
Every car with an electronic engine management system, whether integrated or just for gasoline ignition, has a check engine light. Its purpose is to notify the driver of any engine issues.
Your Accent’s ECU or PCM monitors the air/fuel supply and exhaust gases while you’re driving to make sure the engine is running properly. Your dashboard’s check engine light will come on if a problem is found.
The light could blink or stay on all the time, depending on the failure type. If the issue is severe, your Accent will be in a “emergency” mode that prevents you from accelerating the engine above a specific speed limit and forces you to drive slowly in order to prevent further damage.
Some faults may be indicated by the check engine light, but not all of them. It will depend on how sophisticated your Accent’s electronic control panel is.
It’s critical to have an appropriate scanner that is compatible with the make and model of your car in order to correctly diagnose the issue with your Accent. The engine fault code that the computer has identified and is associated with a specific issue that is impacting the engine will be shown by the scanner.
What Does a Hyundai’s Check Engine Light Mean?
The Onboard Diagnostic System of your Hyundai has identified a problem with the engine, emissions, or gearbox when the check engine light illuminates. A diagnostic OBD-II scanner may extract a failure code from the Engine Control Module (ECM) using the OBD-II connector under the dashboard.
Don’t automatically presume an engine issue if the ECM, also known as the ECU, has discovered a fault code and activated the Check Engine Light (CEL) / Service Engine Light.
The OBD-II port under the dashboard is used to read the trouble codes as the initial stage in the diagnostics process.
The car’s computer (ECU) via the OBD port is read using specialized tools (OBD-II scanners) by an auto repair or dealer technicians.
How can I turn my Hyundai’s check engine light off? Let it go off on its own, repeatedly start and stop your car’s ignition, disconnect your battery, and
Why is the check engine light on on my Hyundai Accent?
Check engine light on Hyundai Accent flashing To name a few, very common causes for a Check Engine Light include a bad head gasket, a problem with the fuel injection system, a damaged oxygen sensor, a filthy mass airflow sensor, or faulty spark plugs.
How can a Hyundai’s check engine light be reset?
- As you drive, let the light turn off on its own. None.
- Three consecutive times of starting and stopping the engine None.
- Reconnect the battery after disconnecting it. Wrench.
- Use a code reader for the OBD
Can my Hyundai be driven with the check engine light on?
We strongly advise not driving your Hyundai while the check engine light is on and setting up Hyundai servicing right soon. The most frequent causes of your check engine light appearing are listed below: You must replace your mass airflow sensor, or MAF.
What does the Hyundai’s yellow engine light signify?
What Sets Off the Check Engine Light on a Hyundai? In general, the Hyundai check engine light acts as a “catch-all” to inform you when your car needs maintenance. It could start as a result of a serious problem or just because your gas cap is unfastened.
Does the check engine light always indicate a problem?
Every time you start the engine with other warning lights on, the check engine light—typically a yellow or orange outline of an engine with the words “Check” or “Service Engine”—should illuminate for a short period of time. If it continues to run, something is wrong. If your check engine light flashes or blinks instead of remaining illuminated, there is a major issue that has to be fixed immediately. While many of the usual causes and solutions for an illuminated check engine light are straightforward, sometimes an engine light indicates a more significant issue.
When the check engine light is flashing or blinking, it typically means there is a significant problem that has to be fixed right away at an auto repair shop. Ignoring a flashing light increases the possibility of developing other issues, such as destroying an expensive catalytic converter (the cost of replacing one on some cars can exceed $1,000). Take your car to the repair as soon as possible if your engine light is blinking.
Before going to a repair if the engine light is on but not flashing, you should tighten the gas cap because a loose gas cap might cause a check engine warning. Check to see if the light turns off after a few more engine starts the following day or so. A damaged gas cap that doesn’t entirely seal can be replaced, which might help fix the issue.
If it doesn’t work, a mechanic will need to electronically connect to the OBD II port underneath the dashboard to scan diagnostic codes that will help pinpoint the cause of the check engine light, such as a faulty spark plug, oxygen sensor, or other sensor. Numerous auto parts retailers also provide free diagnostic tests. They will read the code and inform you of the issue, but they won’t really fix your car. If you want to handle your own car repairs, you might be able to pick up what you need and replace it without going to a repair shop if it’s a spark plug or an easily accessible sensor.
It’s not a good idea to ignore a check engine light even if your car seems to be running smoothly and your mileage isn’t declining. There is a problem, and it will probably get worse. Additionally, if you reside in a region where cars must undergo recurring emissions inspections, your car will likely fail the inspection if your check engine light is on. Depending on what is illuminating the signal, issues like a misfire, a broken spark plug, a malfunctioning sensor, or even dirty fuel could reduce fuel efficiency.
What causes the check engine light to appear most frequently?
The oxygen sensor is the same way. This important component measures the amount of unburned oxygen present in your car’s exhaust, and if there is too little or too much, it may harm other engine components. Every time an oxygen sensor fails, a check engine light will come on. In fact, it’s among the most frequent causes of a check engine light appearing while you’re operating your car.
When my check engine light illuminates, what should I do?
Let’s begin by discussing what the check engine light does not indicate. The check engine light often doesn’t call for instant concern, but it’s simple to panic when you see a warning light turn on. The majority of the time, you can continue driving after it turns on without stopping to contact for assistance. However, you should interpret the light as a signal to visit a mechanic as soon as possible. The onboard diagnostics system in your automobile, which keeps an eye on things like engine speed, fuel mixture, and ignition timing, includes the check engine light. The check engine light is activated when that system notices a problem it can’t fix on its own. 1
When should I start to worry if my check engine light is on?
Each of us has been there. As you’re driving along, going about your business, the Check Engine light suddenly illuminates. You start to worry right away: “How much will this repair cost me?” Will my car have a serious issue with this, or can it be fixed easily? Can I continue operating my car?
The diagnostic system in your car uses the check engine light to alert you when something is wrong. This light often signifies a problem with the engine, drivetrain, or emission control systems of the vehicle.
Unless it is flashing, a Check Engine light typically does not signal an emergency warning to stop immediately lest serious damage be done. This is in contrast to a Temperature or Oil Pressure light. The check engine light flashing indicates a more serious issue. If you are towing a trailer or boat, for example, you should immediately slow down and minimize the weight on your engine. You should also make an appointment for service at a reputable auto repair shop in your area.
If you don’t have a diagnostic code reader, the check engine light will let you know that your car requires work, but that’s really all the information you can get at first. The majority of things that have an impact on the monitored systems have the potential to turn on the Check Engine light, from a simple loose gas cap or faulty spark plug to an expensive computer control module or catalytic converter.
First, check your gas cap. Many cars include an indicator for a loose gas cap that will go off before your check engine light does. The check engine light may come on as a result of fuel system vapor leaks if your gas cap is unfastened or the seal is not tight. It can take some driving and an overnight “parked” period if the gas cap on your car was loose for the light to turn off. For more information, see the owner’s manual or a qualified mechanic.
You can see that your car appears to be in perfect working order except from the check engine light. Do not wait. Driving with the check engine light on may result in catastrophic damage and more expensive repairs. Additionally, your car’s performance and fuel efficiency will probably suffer. As soon as you can, take your car to a reputable service facility.
A technician can connect equipment to a diagnostic port on a check engine light-equipped vehicle to retrieve trouble codes and other diagnostic data. The technician will then identify what caused the light to turn on and what needs to be fixed using this information, as well as, in certain situations, additional testing and diagnostics. Occasionally, if the Check Engine light has been on while driving for a while, one component’s failure can trigger the failure of other parts. Additionally, a single component failure might lead to the failure of various vehicle systems, producing a large number of fault codes. These circumstances can complicate repairs, which frequently include making one repair and then “retesting” to make sure no more repairs are necessary.
Repairs for check engine lights can cost as little as $0 (fixing a loose gas cap) to as much as several thousand dollars (buying a new catalytic converter). The sooner you get your car checked out, the less likely it is that there will be further harm. Have a qualified mechanic evaluate your car as soon as possible.
The orange engine light: what does it mean?
engine management light that flashes An engine misfire, for example, would be a problem indicated by a flashing orange light on the dashboard. Your car may start to tremble, or the engine may sound strangely at first.