What Sets Off the Check Engine Light on a Hyundai? In general, the Hyundai check engine light acts as a “catch-all” to inform you when your car needs maintenance. It could start as a result of a serious problem or it might just light up because your gas cap is unfastened.
In This Article...
SERPRESULT
The check engine light alerts drivers to problems ranging from loose gas caps to more serious failures like a damaged catalytic converter or a malfunctioning ignition switch.
The check engine light never goes off: The onboard diagnostic system of your car has identified a problem that needs to be rectified.
Steps to take if your check engine light is on
As you proceed, the check engine light on your Hyundai begins to illuminate. What might this indicate, and what ought you to do? Not to worry! Regardless of how big the issue is, it does require treatment even if it turns out to be a very little one. Service by Faulkner Hyundai is available.
When your check engine light illuminates, it means that your car’s onboard diagnostic system, often known as OBD, has identified an issue that could have an impact on how your engine operates. Your check engine light may indicate a number of issues. It can indicate a broken or missing gas cap, a malfunctioning oxygen sensor, a catalytic converter that isn’t working properly, a broken mass air flow sensor, or a cylinder that misfired. If you’re unsure, schedule a service appointment with us today, and we’ll determine the issue and have it resolved right away!
Your check engine light cannot be reset by pressing a single button. If the issue doesn’t come up again, the indicator will automatically turn off. If the light doesn’t go out, you should have it scanned to stop the issue from getting worse.
The Service Department at Faulkner Hyundai Philadelphia offers a thorough examination of your OBD system to identify the precise source of the issue and lower the cost of your repairs. The inspection reading is used to identify the cause of the light’s activation and what is required to resolve the issue. Misdiagnosis of the source of your check engine light may result in expensive repairs.
You can trust the skilled experts at Faulkner Hyundai Service to identify the cause of your check engine light and maybe save spending a ton of money on needless items. If a part isn’t absolutely necessary for your car, we won’t sell it to you.
To schedule a diagnostic test if your check engine light is on and you want to figure out what the issue is, call the service center at Faulkner Hyundai Philadelphia.
What Does a Hyundai’s Check Engine Light Mean?
The Onboard Diagnostic System of your Hyundai has identified a problem with the engine, emissions, or gearbox when the check engine light illuminates. A diagnostic OBD-II scanner may extract a failure code from the Engine Control Module (ECM) using the OBD-II connector under the dashboard.
Don’t automatically presume an engine issue if the ECM, also known as the ECU, has discovered a fault code and activated the Check Engine Light (CEL) / Service Engine Light.
The OBD-II port under the dashboard is used to read the trouble codes as the initial stage in the diagnostics process.
The car’s computer (ECU) via the OBD port is read using specialized tools (OBD-II scanners) by an auto repair or dealer technicians.
What does the 2015 Hyundai Elantra’s check engine light mean?
Your 2015 Hyundai Elantra’s check engine light should only flash if an urgent repair is required, so you should bring your Hyundai in right away. This persistently blinking light denotes a severe engine misfire that causes unburned fuel to leak into the exhaust system.
Why is the Hyundai Elantra’s check engine light on?
Flashing Check Engine Light on a Hyundai Elantra A damaged oxygen sensor, a problem with the fuel injection system, a problem with the head gasket, a filthy mass airflow sensor, or defective spark plugs are some other frequent causes of a check engine light.
Why is the 2017 Hyundai Elantra’s check engine light on?
Your 2017 Hyundai Elantra’s check engine light will begin flashing if there is an urgent need for repair, so you should bring your Hyundai in right away. Usually, a strong engine misfire that causes unburned fuel to escape into the exhaust system is indicated by this blinking light.
What does the Hyundai engine light imply when it’s on?
A constant glow normally denotes something less serious, but a check engine light that flashes suggests your car’s engine is seriously damaged and needs quick repair. We strongly advise avoid driving your Hyundai if the check engine light is flashing, and book Hyundai servicing right away.
Can my Hyundai be driven with the check engine light on?
We strongly advise not driving your Hyundai while the check engine light is on and setting up Hyundai servicing right soon. The most frequent causes of your check engine light appearing are listed below: You must replace your mass airflow sensor, or MAF.
What does the Hyundai’s yellow engine light signify?
What Sets Off the Check Engine Light on a Hyundai? In general, the Hyundai check engine light acts as a “catch-all” to inform you when your car needs maintenance. It could start as a result of a serious problem or just because your gas cap is unfastened.
AutoZone’s check engine light is present?
AutoZone scans check engine lights, right? AutoZone can identify codes from the check engine light, yes. If you’re unsure of why your engine light came on, visit your neighborhood AutoZone so that one of our staff members can use our free Fix Finder service to identify the problem.
What causes the check engine light to appear most frequently?
The oxygen sensor is the same way. This important component measures the amount of unburned oxygen present in your car’s exhaust, and if there is too little or too much, it may harm other engine components. Every time an oxygen sensor fails, a check engine light will come on. In fact, it’s among the most frequent causes of a check engine light appearing while you’re operating your car.
When should I start to worry if my check engine light is on?
Each of us has been there. As you’re driving along, going about your business, the Check Engine light suddenly illuminates. You start to worry right away: “How much will this repair cost me?” Will my car have a serious issue with this, or can it be fixed easily? Can I continue operating my car?
The diagnostic system in your car uses the check engine light to alert you when something is wrong. This light often signifies a problem with the engine, drivetrain, or emission control systems of the vehicle.
Unless it is flashing, a Check Engine light typically does not signal an emergency warning to stop immediately lest serious damage be done. This is in contrast to a Temperature or Oil Pressure light. The check engine light flashing indicates a more serious issue. If you are towing a trailer or boat, for example, you should immediately slow down and minimize the weight on your engine. You should also make an appointment for service at a reputable auto repair shop in your area.
If you don’t have a diagnostic code reader, the check engine light will let you know that your car requires work, but that’s really all the information you can get at first. The majority of things that have an impact on the monitored systems have the potential to turn on the Check Engine light, from a simple loose gas cap or faulty spark plug to an expensive computer control module or catalytic converter.
First, check your gas cap. Many cars include an indicator for a loose gas cap that will go off before your check engine light does. The check engine light may come on as a result of fuel system vapor leaks if your gas cap is unfastened or the seal is not tight. It can take some driving and an overnight “parked” period if the gas cap on your car was loose for the light to turn off. For more information, see the owner’s manual or a qualified mechanic.
You can see that your car appears to be in perfect working order except from the check engine light. Do not wait. Driving with the check engine light on may result in catastrophic damage and more expensive repairs. Additionally, your car’s performance and fuel efficiency will probably suffer. As soon as you can, take your car to a reputable service facility.
A technician can connect equipment to a diagnostic port on a check engine light-equipped vehicle to retrieve trouble codes and other diagnostic data. The technician will then identify what caused the light to turn on and what needs to be fixed using this information, as well as, in certain situations, additional testing and diagnostics. Occasionally, if the Check Engine light has been on while driving for a while, one component’s failure can trigger the failure of other parts. Additionally, a single component failure might lead to the failure of various vehicle systems, producing a large number of fault codes. These circumstances can complicate repairs, which frequently include making one repair and then “retesting” to make sure no more repairs are necessary.
Repairs for check engine lights can cost as little as $0 (fixing a loose gas cap) to as much as several thousand dollars (buying a new catalytic converter). The sooner you get your car checked out, the less likely it is that there will be further harm. Have a qualified mechanic evaluate your car as soon as possible.
Does the battery’s check engine light come on?
Your check engine light could come on for a number of reasons, including a broken oxygen or air flow sensor, a worn spark plug, a damaged catalytic converter, or a loose gas cap. Another potential culprit is a poor battery, although not for the reason you might expect. A defective or undercharged battery won’t be able to supply the proper amount of power to the computer in your car. The check engine light may turn on as a result of this. You might also have a helpful battery warning light on your dashboard if you drive a more recent model of vehicle.
Will the check engine light automatically turn off?
If the problem that caused the check engine light to come on is fixed, the light will go out automatically. Consequently, if your converter is subpar and you frequently drive in stop-and-go traffic, which puts a lot of strain on the converter, it may have caused the check engine light to come on.
The orange engine light: what does it mean?
engine management light that flashes An engine misfire, for example, would be a problem indicated by a flashing orange light on the dashboard. Your car may start to tremble, or the engine may sound strangely at first.
Does a dreaded oil change set off the check engine light?
It’s an annoying sight. You are aware that you should take your automobile to a repair as soon as possible when the check engine light turns on. These lights may indicate a significant issue or something as straightforward as a loose gas cap. Regardless, figuring out the issue is essential.
An appropriately performed recent oil change is one item that won’t cause a check engine light to come on.
Although oil changes are a necessary part of car maintenance, they won’t do anything to cause your check engine light to illuminate. After changing the oil, if the light comes on, something else is wrong.
How long should the check engine light remain on?
It is still possible to drive your car if the Check Engine light comes on for any reason, but it is only advised to go another 50 to 100 miles before checking your car’s computer for problem codes. You can pinpoint the problem at hand using this technique and deal with it however you see proper.
Depending on the problem that caused the Check Engine light to come on, you could be able to keep driving for a very long time or only a few days. The engine computer has time to reset some sensors after traveling between 50 and 100 miles, which could resolve the issue.