The BMW Center caps come in two sizes: One size of the cap has a diameter of 2 11/16″ (68 mm), while the other is 23 15/64″ (59 mm). If your wheels are genuine BMW. Sometimes you’ll notice 56mm or 65mm; I asked our engineer, “Why do BMW center caps come in two sizes?” If you are still unsure, check the BMW official website to the specific date. We checked it beforehand, but it was problematic because different people use different measurement techniques.
In This Article...
The Tire Rack sponsors the Wheels and Tires topic. By purchasing tires from the above link, you can directly support e90post. For each purchase made using the link, e90post receives sponsor funding to maintain the website. Disclaimer
My ASA center caps need to be replaced (19) “I’m trying to replace my BMW ones (AR1) but am having trouble determining the proper size. I’ve read other articles that claim Tire Rack carries them, but when I emailed them, they responded that they don’t, noting that my rims’ opening is 60mm. Do you have any recommendations for suppliers?
I’m not sure if the BMW center caps are the same size to fit your rims, however the dealer might have some. They now have a new model center cap. There is no longer a plastic border around the roundel, which is now larger.
When I called the retailer, they claimed to only have one size in stock, which I believe is the same size as what is on my 17-inch “oem wheels, and that one is slightly too large for my new rims.
I mistakenly believed that ASA offered BMW roundel stickers for its own headwear.
+1. I believe the OEM ones are 68mm, although I could be mistaken. The stickers will probably need to be purchased. I was required to retrieve some from the delearship.
Since the roundels in this case have a sticky backing, all you need to do is place them on top of the existing center caps. My winter wheels were 58mm concave, and the dealer’s mechanic believed they were OEM.
The identical issue is occurring with my new wheels. My center caps only fit the front wheels, and I just received them today. They simply wouldn’t remain in the back. I’m disappointed since I purchased a brand-new whole set of CF roundels to replace them all, but they just do not fit my wheels.
The sizes for BMW wheel caps that I’ve found are 65mm, 68mm, and 70mm. Use your OEM wheel caps; if they’re too wide, look for 65mm wheel caps; if they’re too small, buy 70mm wheel caps. The oem is 68mm, so use your OEM wheel caps.
Regarding 60mm, I haven’t come across a wheel cap that size, so you might be out of luck. Most likely forced to apply sticker overlays.
For bmw wheel caps, there is a considerable number of size/color combinations on Ebay. I think M-force designs and JBSPEED also sell aftermarket wheel caps in the OEM form.
My ASAs are about to be remounted. In my arrangement from the previous summer, I adhered my ASA caps to the center caps using the gold BMW symbol. I was surprised at how effectively it worked, but I’m hoping for something more long-lasting.
What size center caps come with Audis?
Fortunately, all Audi vehicles come with the proper OEM caps. The standard for center caps is 22 inches. These will fit the majority of mid-sized car wheels. 16-inch: Although these caps are a little smaller, do not be discouraged by this.
Are the wheel caps on all BMWs the same size?
Wheel caps from BMW come in a variety of diameters; they are not universal. You must gauge the width of your wheel’s opening before purchasing caps that fit.
Do center caps for BMW wheels fit aftermarket rims?
I apologize for the basic query. Can I still add a BMW logo in the center of aftermarket wheels? Is this not possible or advised for other reasons? Is there something like a recommended diameter?
Given that it is your vehicle, you are free to use a BMW cap (or any other cap) that fits snugly.
A simple plastic piece with tabs and a locking ring makes up the central cap. However, not all wheels, whether original equipment or aftermarket, have the same size opening for a center cap. Once you’ve decided on a wheel, simply give the manufacturer a call to find out if an OEM BMW center cap will fit.
You can examine each wheel separately. Additionally, it will specify the center caps that fall under optional equipment.
Do apex wheels fit BMW center caps?
Our 5×120 APEX wheels are totally compatible with original BMW center caps. These new premium versions of the caps are available. They are convex and completely rounded at the edge. Compared to the previous recessed flat decal caps
Are Center hats uniform in size?
The design of center caps provides a nearly infinite number of options. The particular wheel only predetermines the diameter and perhaps the height. The dimensions typically range from a 50 to 75 mm diameter.
Are wheel center caps necessary?
In the middle of most wheels, there is a hole. The centerbore is the name of that hole. The centerbore’s functions are as follows:
- Keep the wheel and hub in proper alignment.
- lessening wheel vibration
The issue is that the centerbore leaves the spindle nut exposed if the center cap is missing. The seal is the only line of protection for the wheel bearing. When you drive, a lot of dirt, moisture, road salt, and grime are in contact with your wheels. The spindle nut and wheel bearing may become contaminated by those contaminants. This could result in:
- Spindle and spindle nut corrosion
- Failure of the seal causes the wheel bearing to fail.
The centerbore is concealed by a wheel center cap. This stops the contamination of these components by the contaminants. Some wheel center caps have enough room to accommodate all of the lug nuts. This protects the lug nuts from the weather. Wheel removal and installation are much simpler when your lug nuts are kept clean.
What use do center caps serve?
Hubcaps, like all automotive parts, have a very specific function, even though some motorists question their necessity. Do your new alloy wheels require hubcaps? Uncertain of the true purpose of hubcaps? Are you thinking about investing in new summer tires? What you should know is as follows.
Hubcaps have been utilized since the days of horse-drawn carriages! Hubcaps are typically constructed of plastic in the modern world, yet they have the same premium appearance as alloy wheels. The hub portion of your car’s wheels is where hubcaps are supposed to fit snugly. They fit securely and are simply snapped into position.
Your tires come into contact with a variety of dirt and particles while driving. You may drive with confidence knowing that your wheels won’t be harmed by dirt, rocks, or other debris by using hubcaps.
You want your tires to endure as long as possible, whether they are pricey or not. The lifespan of your wheels will be significantly extended if you have hubcaps on each wheel to reduce and even eliminate damage.
Another advantage of hubcaps is that they shield wheel nuts and bolts from rust and corrosion. This makes it much simpler if you ever need to replace a wheel or change a flat tire.
Are wheel center caps used for anything?
A center cap, sometimes known as a centercap, is an ornamental disk that encircles the center of a car wheel. The primary function of early automobile center caps, which were often small, was to keep debris away from the spindle nut and wheel bearings. To conceal the lug nuts and/or the bearing, center caps are frequently found on modern cars. Hubcaps come in two main varieties: wheel covers and center caps. Modern center caps can be fastened to some wheels with spring clips and others with lugs or other threaded fasteners.
Floating center caps: what are they?
Floating center caps: what are they? The wheel cover is a type of rim-covering ornamentation. Additionally, due to its prominent placement outside the car, it serves as an essential exterior adornment. Even when the car is moving, the floating center caps create a distinctive focus point on the wheel.
How are old-fashioned hubcaps sized?
People who want to know which of our hubcaps will fit their wheels call us practically every day. Compare your wheels to the one below as a starting point:
Follow the guidelines that go with the yellow arrow if your wheels resemble those in the image: When measuring the distance between the center of your wheel’s pilot hole and one of the nubs’ outer edges, multiply the measurement by two. Your hubcap will fit based on your nub diameter.
After that, compare your measurement to the nub diameter indicated on each hubcap that you are considering from our selection. Links to the goods that fit this kind of wheel are provided below:
These hubcaps have an undercurled lip that snaps around the outside of the nubs on the underside, but it’s not always a simple fit. Apply pressure on the hubcap’s very outer edges by placing the palms of your hands at 12:00, 6:00, 3:00, and 9:00, respectively. Use a rubber mallet to gently tap the metal around the edges instead of a hammer, which may easily dent the metal. Just keep in mind that the rim is where the cap’s structure is located.
Try switching the hubcaps on your wheels if you find that one fits your wheels properly and the other doesn’t. Additionally, little duct tape wrapped around the undercurled lip can tighten the fit if you find it to be a little slack. Or you could just slightly indent the rims.
Our 1940s Hubcap VTS-690 might work if your wheels don’t have metal clips soldered or fastened around the interior like this. Their back entrance is 7-3/4 inches in diameter. Hopefully, you can bend or alter your clips to make room for that circumference.
While traveling, hubcaps frequently stray from their residence. Hubcaps from cars have been spotted by all of us in the highway shoulder or ditch. This holds true for any hubcap, but especially for those on vintage cars. In order to reduce the risk of theft, some owners of antique cars and trailers decide to remove their hubcaps while driving and to reinstall them at the campground or rally. a wise concept
How can I prevent someone from stealing my wheel caps?
These ties will keep your trims in place and serve as the strongest deterrent possible against theft of wheel trim. Additionally, stainless steel is resistant to the elements and won’t rust over time. These cable ties are the nylon cable tie’s Arnold Scharzenegger cousin.
The simplest, least expensive, and most straightforward approach is to utilize stainless steel cable ties. Your trims will be firmly fixed to your wheels in about 5 minutes. They offer enhanced security and cannot be cut off as readily as nylon cable ties. After that, you can unwind knowing that those cunning monkeys won’t steal your hubcaps the next time you park.
How to secure wheel covers, wheel trims, and hubcaps has long been a topic of discussion. So now you are aware. In fact, stainless steel cable ties are sometimes referred to as wheel trim ties or wheel trim cable ties since they have been so closely associated with preventing hubcap theft.