Extended Performance Full Synthetic Motor Oil, Mobil 1, 5 quarts, 5W-20 (Part No. 120765)
In This Article...
Can I use 5W-30 for 5W-20?
Yes. Using an oil with a greater viscosity, like 5w30, won’t cause short-term damage to your engine. To create uniform criteria for achieving realistic fuel efficiency and engine operating conditions, automakers collaborate closely with industry oil specialists like the SAE. These guidelines enable automakers to use particular oil grades and viscosities to achieve MPG and engine life objectives. The SAE claims that using low viscosity engine oil to increase fuel efficiency not only reduces frictional loss of the engine oil seal but also has no performance flaws.
Even though there are few practical differences between 5w30 and 5w20 in terms of fuel economy and engine wear, utilizing the recommended oil grade could void your powertrain warranty if the manufacturer. However, if your warranty is no longer valid, you can use any oil without any problems.
While using a thicker oil, such as 5w30, won’t cause your engine any short-term harm. It is advised that you, whenever feasible, abide by manufacturer recommendations.
Definition of 5w20 Vs. 5w30
The engine oil type 5w20 is distinguished by its oil weight of 20 in warm weather and a winter grade of 5. It has a lower viscosity than 5w30. While 5w30 has the same viscosity rating of 5 in the winter, it has an oil weight of 30 in the summer, making it thicker.
Working conditions for 5w20 Vs. 5w30
For use in cooler climates, use 5w20. As it moves swiftly and smoothly to deeper engine components with less friction, it makes it possible for a vehicle’s engine to start up rapidly. It immediately lubricates the components. In contrast, 5w30 performs well in warm environments. Unlike 5w20, it does not thin out quickly when exposed to heat. The engine components are therefore better protected overall when using 5w30 at operational temperatures.
Performance of 5w20 Vs. 5w30
These two engine oils function well in the environments for which they were created. Due to its low viscosity and reduced friction in the engine parts, 5w20 is a champion in colder regions with speedier engine starts. In hotter regions where a thick oil is required to resist the higher temperatures, 5w30 excels. Naturally, the engine will heat up more, necessitating a thicker oil. In colder climates, 5w20 is associated with higher performance and fuel economy, whereas 5w30 is associated with better overall engine component protection.
Can my 2007 Honda Civic use synthetic oil?
No, synthetic oil won’t harm your engine, unlike what many people think. However, it used to be accurate. Esters, which are chemical components that would wear down the seals in ancient engines, were present in the first synthetic oil when it was initially introduced decades ago. However, you no longer need to be concerned with esters wrecking havoc on your old engine seals thanks to continually advancing synthetic oil technology.
The bottom conclusion is that your older Honda Civic engine is now fully safe to use synthetic oil!
The 2008 Honda Accord takes what kind of oil?
2008 Honda Accord engines require 5W-30 motor oil. For this car, you can use conventional, synthetic, or synthetic-blend oil.
You can choose between synthetic and traditional oils as long as your engine is running on 5W-30 engine oil. For the duration of your Accord’s life, you should only use 5W-30 engine oil as long as it is running smoothly and emits no smoke or burning aromas.
Jerry may be trying to lower your auto insurance costs as you work on the maintenance.
Don’t be afraid to alter insurance or payment plans because you’re concerned about the extra labor. Jerry completes all paperwork and even assists with canceling your old coverage! Additionally, you can text one of our agents using the app if you have any questions along the route. They’ll be there for you whenever you need them.
Better oil to use: 5W-20 or 5W-30?
The two oils are not superior to or inferior to one another. Your engine needs and the type of vehicle are the determining factors.
You should take into account two things while selecting the ideal multigrade engine oil for your vehicle:
- The recommended oil viscosity grade for your engine
- The temperature that your automobile usually operates at (whether you drive in colder temperature or hotter climates)
Even though certain automobiles do provide some variation in engine oil choices, the majority have a suggested viscosity grade. This is due to the fact that engines are built to run on a particular oil viscosity, and changing that could have an impact on the performance of your engine.
Ideally, 5W 30 oil is ideal for drivers who frequent more extreme weather conditions. Compared to 5W-20 oil, it has a higher viscosity index and a wider operating temperature range. In both colder and hotter climes, 5W 30 oil will provide better protection.
For people who reside in colder climates with low temperatures, 5W-20 oil is recommended. It is suitable for light-duty applications and engines with moderate temperature ranges. In cooler conditions, 5W-20 oil offers good start-up performance.
Note: An oil with a high mileage rating may be required for older vehicles (5W-20 or 5W-30). In this instance, the high mileage oil provides the engine with superior friction and engine drag protection at high temperatures.
Is 5W-30 suitable for long distances?
High-performance vehicles, those that tow heavy loads, and those operating in hot climates should use full synthetic 5w30 oils. High-performance additives are used in the production of these oils to give them the ability to withstand harsh circumstances.
5W-20 or 5W-30 is thicker oil, which is it?
Thus, 5w20 is a thinner oil during operation temperatures than 5w30 due to viscosity, whereas the latter is thicker. Most manufacturers today create engines that use 5w20 oil, thus it’s crucial to keep with this viscosity and not switch to 5w30.
Hondas require synthetic oil, right?
Can I run my Honda engine on synthetic oil? Motor oils made of petroleum are used to lubricate Honda engines throughout development, testing, and certification. Synthetic oils are permitted, but any motor oil used in our engines must adhere to the owner’s manual’s oil specifications.
Is 0W-20 equivalent to 5W-20?
The ability of an oil to flow is measured by its viscosity. It also describes the thickness of the oil at various temperature levels.
When operating in freezing temperatures, 0W-20 motor oil performs like an SAE 0W weight oil. While 5W-20 oil functions as an SAE 5W weight oil.
The better the motor oil performs at low temperatures, according to SAE nomenclature, the lower the number before the ‘W’ is. Since 0W20 is much thinner than 5W-20, it is more stable at low temperatures and flows easily through the essential engine components.
A more suitable oil for a typical operating temperature range of -22F to 68F is 5W-20, which has a viscosity that is relatively thicker.
Does 5w20 work well at high mileage?
designed for vehicles with heavy mileage ExxonMobil advises using Mobil 1 High Mileage 5W-20 motor oil in high mileage vehicles (even those that have previously used conventional lubricants of lower grade), such as: Cars. Trucks.
What happens if I fill my automobile with the incorrect oil?
Inadequate lubrication, overheating, and possibly transmission failure can result from using the incorrect fluid. Even after flushing the transmission, a mechanic might not be able to undo the damage. Your transmission might also be ruined if you accidentally add motor oil or brake fluid.
What oil is an alternative to 5w20?
To understand the potential changes if the oils are replaced, we need to understand the distinctions between 10w30 and 5w20 when asked can I use 10w30 instead of 5w20. The engine oils 10w30 and 5w20 are comparable. However, their viscosity is what causes the difference. Both multi-grade motor oils perform admirably in a range of temperatures. A comparison of the differences between the two engine oils is shown below:
Difference In Meaning
Both 10W30 and 5W20 have a “W for winter. Oils have a higher flow resistance at low temperatures because their viscosity is lower. 5w20 is somewhat thinner in contrast, though. As a result, it will protect the inside components of engines more quickly than 10w30.
Performance
Similar SAE ratings for 10w30 and 5w20 engine oils indicate that they will function similarly at running or high temperatures. As previously noted, the number 30 denotes the oil’s viscosity at high temperatures. Because 10w30 tends to thicken in cold climates, 5w20 is a preferable choice under these conditions.
Ideal Use
Make sure to consider where the vehicle will be utilized before selecting an engine oil. Despite the fact that both engine oils in question are multi-grade, 5w20 thins out enough when utilized in a place where the temperatures are rather low. Because of this, it outperforms 10w30 in the cold. On the other hand, 10w30 flows well in hotter climates or throughout the summer.
Lubrication
5w20 is more lubricant-efficient than 10w30. While 10w30 works best for cars that carry big weights and commercial vehicles, it is ideal for light-duty petrol and diesel engines as well as individual vehicles.