Your 2003 BMW 325i’s original tire size is 205/55R16 91H. Below is a color-coded description of the tire size for the 2003 BMW 325i.
The tire size was made to accommodate wheels or rims with a 16-inch diameter.
With a load index of 91, this tire can support a load of no more than 1353 pounds (615 kg). A greater number indicates that the tire can support more weight. Lower values indicate the reverse.
This figure indicates that the aspect ratio of your tire is 55%. In other words, the sidewall height of your tire (measured from the rim’s edge to the tread) is equal to 55% of its width. The sidewall height in this instance comes out to 112 millimeters.
This letter indicates the design of your tire. About 99% of all tires sold today are made using the traditional manufacturing type, radial.
The highest speed that may be maintained for 10 minutes on this tire is 130 mph (210 km/h), according to its speed rating of H. A faster pace becomes risky.
In This Article...
jdstrickland
Avoid the temptation to put 17-inch wheels up front and 18-inch wheels in the back; your car wants all of the wheels to be the same diameter. Place either 18s or 17s all around; do not mix.
You need 245/40s rather than 245/45s if you use the 17-inch wheels and wish to mount bigger tires on the back of the stock rims. Stick with the 225/45×17 factory fitment because I don’t think you really want wider tires on the back unless you also have wider wheels.
In the formula 225/45×17, the 225 represents the tire’s width in millimeters, the 45 represents a percentage of the width and determines the sidewall height, and the 17 represents the wheel’s diameter in inches. When you take a 225/45×17 and divide it by 40 to get 225/40×18, you have achieved the desired width in an 18. In terms of overall diameter, the 18″ size is identical to the 17″ size (less than an eighth of an inch greater diameter).
A BMW 325i’s lug pattern is.
Tire size chart for the 2003 BMW 325i 1994 BMW 325i. 15-Inch. 205-60-15; 1992 BMW 325i. 15-Inch. 205-55-16; 2001 BMW 325i. 16-Inch. 205-55-16
Which tire size, 215 or 225, is larger?
You can, indeed. But only if your car’s rims can support tires that are 10 to 20 mm wider. Remember that bigger wheels use more fuel since they have more rolling resistance. Once more, bigger tires cost more than narrower ones since more rubber is required during production.
BMW wheels can be swapped out.
Honda Civic or Mazda Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3 are the most popular vehicles with PCD 5×114,3.
Can I substitute 215 tires for the 225s?
The wheel arrangement includes tires. For instance, even though the rims on your car are a specific size, you can buy alternative tire sizes to fit them as long as the middle of the tire is the right size. Having said that, a car with larger rims will frequently be able to accommodate bigger tires than other cars.
Can an automobile have tires of varying sizes on it?
For instance, it is typically advised to use a rim that is 6.5 inches wide for a tire size of 205/55 R16 (the rim width is the first number given in the rim size marking). However, this tire might also be mounted on a rim that is between 5.5 and 7.5 inches wide.
How are BMW wheels bolted together?
Acura, BMW, Buick, Cadillac, Chevrolet, GMC, Honda, Land Rover, Lexus, Pontiac, Tesla, and Volkswagon are examples of common automobiles with a 5×120 bolt pattern. This is what? Find a list of automobiles having a 5×120 bolt pattern using the table below.
For 205 55R16, what size rim do you need?
The tire tread width is represented by the first three numbers (205) in millimeters. Aspect ratio or tire profile is 60. The percentage of the tire width is used to represent this. The tire’s construction method, represented by the letter “R,” identifies it as a radial tire.
Which automobiles have a 5×120 bolt pattern?
They should easily fit on the tire and rim from a physical perspective. The difference will be that the fresh (to you) tires have a little shorter rolling distance. The width is 1 cm different from 215 to 205.
Can 5×114 3 fit 5×120?
These 5×120 to 5×112 PCD adapters are made to convert your PCD from 5×120 to 5×112, and they just snap onto the current wheel hub on your car. These M14x1. 5 threaded, 45mm thick PCD hub adapters will reduce the center bore of your car from 72.5mm to 57.1mm.