The TPMS (Tire Pressure Monitoring System) is designed to notify you when a tire’s pressure is too low and may result in hazardous driving situations. If the indicator is on, your tires may not be properly inflated, which might result in premature tire wear and even tire failure. It’s critical to comprehend the value of appropriate tire inflation and how TPMS can prevent a potentially hazardous situation.
Both excessive and inadequate tire inflation can result in early tread deterioration and potential tire failure. Increased traction, early wear, and an inability to withstand impact from the road can all be effects of overinflation. The middle of the tread on tires with excessive air pressure may prematurely wear out. Underinflation, on the other hand, results in slow tire reaction, reduced fuel efficiency, excessive heat buildup, and tire overload. Both sides of the tread edges or shoulders will prematurely wear out on a tire that is underinflated.
Finding the TPMS indicator on your dashboard is easy if you’re just learning about tire pressure sensors. It is a light that has a horseshoe form with an exclamation point in the middle.
In This Article...
What does my Honda’s TPMS light mean?
If the TPMS light on your Honda is on and flashing, it may indicate that the tire pressure sensors are broken or that the sensor battery is deteriorating. You should bring your vehicle into our Service Center as soon as possible, regardless of the problem.
Can I drive with my TPMS on?
There are several possible meanings when you see that silly little light with the exclamation point glaring back at you. It’s frequently anything as harmless as temperature changes that result in a change in the tire’s air pressure. In more severe situations, a puncture or other damage has caused the tire to lose pressure. The sensor can also be activated and result in the light coming on if your tires are overinflated.
Is It Safe To Drive With TPMS Light On?
To avoid seeming like Debbie Downer, we’ll simply say no. Driving around with your TPMS light on is not safe. You can’t tell how quickly your tire is losing air or how long it has been over- or underinflated without doing a tire examination. The best course of action is to check the current inflation level of each tire with a tire pressure gauge.
When the tire inspection light appears while you are driving, slow down and get to the closest gas station or service facility.
How can I fix my Honda’s TPMS light?
So your low tire pressure warning light illuminates as you’re driving. At the closest petrol station, you stop and inspect your tires. When you put air in the low-pressure tire(s) and resume driving, the warning light does not go out. Why does it behave that way? Here is a fast lesson on how to turn off the TPMS light in your Honda because this is a typical problem for Honda owners.
The TPMS needs to be recalibrated every time you refill your tires, replace a tire, or have them rotated for it to function correctly once more. Driving between 30 and 65 miles per hour for around 30 minutes is required once the recalibration process has begun. Your tire pressure monitoring system will then automatically cease, and you’re good to go.
Does the Honda TPMS identify the tire?
The air pressure of each tire is measured by Direct TPMS using sensors that are affixed to the inside of the valve stems. In the event that a tire’s pressure drops below the recommended level, this enables individual tire pressures to be displayed on the information display so that the problematic tire may be easily identified.
Why are the tires fine but the TPMS light is on?
It’s likely that one or more of your tires have low air pressure if you see the tire pressure indicator turn on. However, even if your tires are in good condition, there are a number of things that could cause the sensors to go off, so you shouldn’t rely only on the data from the tire pressure monitoring system of your car.
We’ve talked about some additional aspects of automobile maintenance in this piece. Read these articles if you have some time:
Why does the TPMS light turn on?
Do you know what to do when the TPMS symbol for low tire pressure illuminates? The first step is to physically gauge your tire pressures and add air as necessary to bring them up to the manufacturer’s recommended levels. (The owner’s handbook or the driver’s door jamb will have the proper pressure; the sidewall of the tire will only have the tire’s maximum pressure.) Remember that your TPMS does not substitute for regular tire pressure checks. It is a gadget that can assist in notifying you when pressure is low, but a tire may deflate below the recommended level long before the TPMS warning light illuminates. When the tire pressure is either too low or too high, the TPMS light illuminates.
TPMS LIGHT ILLUMINATES WHILE DRIVING
At least one of your tires has low air pressure if your TPMS light illuminates and stays lit. Utilizing a gauge, check the pressure in each tire, identify the reason for pressure loss, and repair or add air to the tire(s) as necessary.
TPMS LIGHT GOES ON AND OFF
Variable temperatures may be causing your TPMS light to turn on and off when your tire pressure(s) is/are close to the level that generates an alert. The indicator may turn out when pressure increases during the day due to rising ambient temperature and/or heat produced by operating the vehicle; this often happens when pressure lowers at night due to a drop in ambient temperature. Check the pressure in each tire using a gauge and add air to any that need it.
TPMS LIGHT FLASHES AND THEN STAYS ON
Every time you start your car, if the light flashes for 60 to 90 seconds before staying on, it signifies the TPMS isn’t working properly. You should take your automobile to an auto repair shop for a checkup. The TPMS is malfunctioning and unable to alert you to low tire pressure until it is fixed. Using a gauge, check the tire pressure on all of them, and add air to the ones that require it.
How can I activate the TPMS light?
Turn the key to the “on” position with the car off, but don’t let it run. When the Toyota tire pressure sensor blinks three times, hold down the TPMS reset button until it stops blinking. Start the car, then let it run for 20 minutes to let the sensor reset. Under the steering wheel is typically where you’ll find the TPMS reset button.
Will the TPMS light turn on if my tires are over-inflated?
You most likely have a Tire Pressure Monitoring System (TPMS) installed if you drive a more recent vehicle. Your tires’ internal electrical TPMS system keeps track of their air pressure. The TPMS turns on a dashboard warning light if your tires are either under- or over-inflated. You need to have your tire pressure checked if the light is steady. You should have your TPMS examined if the light is flashing.
Visit one of our stores for a free tire pressure check if you notice the TPMS light. If you’re on the road, fill up your tires with air as soon as you can at a petrol station. unsure how much more to say? For further information, see How to Check Tire Air Pressure.
Don’t panic if the TPMS light illuminates or flashes after you install the spare if you need to change a tire. Nothing to worry about there; that’s merely the system’s way of letting you know it can’t locate a TPMS unit in the spare tire.
Accurate tire pressure is now possible thanks to TPMS. It automatically alerts you when the pressure is low, keeping you safer, preventing damage to your tires, and increasing your MPG.
How do I turn off the TPMS light?
Don’t start the car; just turn the key to “on.” Till the tire pressure light blinks three times, press and hold the TPMS reset button. Press the button again to start the vehicle. Within twenty minutes, the light ought to turn off.
Should the TPMS be reset after purchasing new tires?
After changing or rotating your tires, or after adding new sensors, you should always reset your TPMS. Even after you have inflated your tires, some sensor manufacturers advise restarting the device. By teaching the primary TPMS system to identify the sensors in their new locations, resetting the TPMS is frequently referred to as retraining the system. TPMS reset procedures vary from vehicle to vehicle and typically involve a specific sequence of ignition and pedal actions, a configuration change in your dashboard menu, or the use of a TPMS Reset Tool.
Does Honda provide warranty coverage for TPMS?
The difficulty is in determining whether your tire or the tire pressure monitoring device is to blame. If the manufacturer’s error occurs within the 3-year, 36,000-mile Honda warranty period, you are probably protected.
However, the manufacturer might classify the system as worn out if debris hits it if it is involved in even a little accident. The only way to find out is to take your automobile to the dealer and have them identify the issue.
Jerry can handle the hard lifting if you want to save money on future repairs that aren’t covered by your warranty.
In approximately 45 seconds, Jerry, a certified insurance broker, can get quotes from more than 55 of the best insurers. Jerry can assist you with purchasing new insurance and canceling your old policy if you discover a fantastic deal. Users save more than $800 year on average.
What is the price of TPMS sensor replacement?
Replacement of a TPMS sensor typically costs between $208 and $250. Between $55 and $69 is the expected range for labor costs, while $153 to $181 is the range for part costs. Taxes and other costs are not included in this range, nor are your particular vehicle or geographic area taken into account. There might be more repairs required.
How does the TPMS identify each tire?
The anti-lock brake system’s wheel speed sensors are often used by an indirect TPMS. On-board computer systems can employ these sensors to compare wheel revolution rates between individual wheels as well as to other vehicle operation data, such as speed.
The computer can determine the relative size of the tires on your car based on how quickly each wheel rotates. The computer determines that a tire is underinflated when a wheel starts spinning more quickly than normal and warns the driver accordingly.
Therefore, a device for monitoring tire pressure indirectly does not truly measure tire pressure. The same kind of measurement you may observe with a tire gauge is not being processed electronically. An indirect tire pressure monitor only counts the rotational speed of your tires and sends instructions to the computer to activate the indication light when something seems off with the rotation.
What pressure causes the TPMS light to illuminate?
When a tire’s pressure drops by 25% below the suggested level, the TPMS warns drivers. For instance, if the recommended pressure for your tires is 32 pounds per square inch (psi), the TPMS dash light will activate when the tire pressure exceeds 24 psi. For safe driving, proper tire pressure is crucial.