BMW Longlife 04 lubricants are of the Top Tier lower SAPS1 category. They are made to work with or without particle filters in BMW gasoline and light-duty diesel engines. BMW Longlife 04 oils are typically SAE 5W-30 and 5W-40 high HTHS (>= 3.5cP) base oils from API Group III and Group IV.
In This Article...
What the BMW LL-04 standard means
BMW has always been a significant player in the market for light duty vehicles because to its widespread presence and considerable market share.
BMW Longlife-04 is a new engine oil specification that was released by BMW in 2004. This was in response to hardware modifications the firm had made to its vehicles in order to comply with increasingly stringent worldwide emissions legislation, particularly the Euro 4 emissions standard. The standard has, however, gradually altered since 2004 and is now much more stringent.
The primary cause of these modifications is the greater-than-ever rate of change in car hardware nowadays. Of course, lubricants are essential to engine design and frequently play a significant role in ensuring the proper and effective operation of hardware components.
The most recent BMW Longlife-04, which was released in December 2018, differs significantly from the original 2004 specification. It is specifically made to fit the needs of BMW’s most recent automobiles while also working with more traditional vehicles that are still on the market.
The testing process has evolved along with the engines. The BMW N20 and BMW B48 are two particular engines that are tested in accordance with the most recent BMW specification. These are both gasoline four-cylinder engines that can produce a lot of torque even at low RPMs.
Three additional bench tests are also added to illustrate potential problems with contemporary engines. Both a new bench wear test and an aeration test are offered; both tests demand that the lubricant’s light viscometrics do not cause problems in usage. In addition, a new turbocharging coking test is necessary since turbochargers run at extremely high temperatures and deposits might form when using subpar lubricants.
For peace of mind, it is therefore important to confirm that the lubricant you use has been officially certified by BMW in addition to having been tested and found to be suitable for usage.
Engine oils are approved by BMW Longlife 04
For diesel vehicles with and without diesel particulate filters, BMW released the BMW Longlife 04 engine oil specification in 2004. Some gasoline engines are also covered by the approval in the EU, Switzerland, and Norway. The BMW Longlife 04 approved engine oil change intervals are flexible thanks to the integrated Longlife Service and are based on the vehicle’s service interval display. BMW Longlife 04 is compatible with SAE 0w30, SAE 5w30, SAE 0w40, and SAE 5w40 viscosity classes.
Only Europe (EU plus) has Longlife-04 oils authorized for spark-ignition engines.
Is the oil in BMW Longlife synthetic?
BMW engines’ longevity and protection A synthetic engine oil called BMW TwinPower Turbo Longlife-01 SAE 5W-30 is used in cars. It prolongs the life of the engine by keeping the most crucial parts of it clean and shielding them from deposits and rust. In addition, it helps maintain performance and lowers friction and evaporation loss as compared to standard engine oils. Thus, fewer oil refills are required as a result of the decreased oil use.
All BMW petrol engines and all BMW diesel engines without a particulate filter are compatible. On demand, additional details are available.
Describe BMW Longlife.
Upper Mainline lubricants include BMW Longlife 01 oils. They are intended to be the bare minimum for the majority of BMW gasoline engines starting in model year 2002 and light-duty diesel engines starting in model year 2003 that don’t have diesel particulate filters.
How long is the lifespan of BMW long life oil?
BMWs are unique automobiles, and the most recent versions are designed to use synthetic fluids and oils that require less frequent replacement than conventional lubricants. They are made to go up to 12,000 or even 15,000 miles between oil changes, or nearly one driving year.
Describe LongLife oil.
High-grade, totally synthetic oil with greater resistance to aging at high temperatures is called LongLife oil. Initially known as SAE 0W-30, LongLife servicing complied with Volkswagen specifications 503 00 for petrol engines and 506 00 and later 506 01 for diesel engines when it was first introduced.
Which oil brand does BMW suggest?
bp (February 15, 2021) is delighted to announce that it has been chosen as the engine oil partner for BMW and MINI authorized dealers throughout the US, Canada, and Mexico. bp is a global leader in high-performance lubricants and is the creator of the Castrol Oil Brands. As Castrol had been the engine oil supplier for 14 years prior to this new five-year arrangement, a long-standing partnership between these two premium brands is once again established.
As part of the current initiative, bp will keep making engine oils under the BMW Group brand that adhere to the most modern and stringent engine requirements set forth by the OEM, including LL-17 FE+ and LL-12 FE as well as older generation specs like LL-01 and LL-04. The Castrol EDGE, a well-known full synthetic brand reinforced by Fluid Titanium Technology, is the foundation for the BMW brand’s lubricant formulas. Fluid Titanium Technology boosts film strength, lowers friction, and enhances lubrication under the extreme pressure of high power engines.
“We are honored that the BMW Group has chosen us to serve as their lubricant provider once again. The BMW brand is well-aligned with bp’s market position because it is both iconic and widely known as a sign of performance engineering. We anticipate working together in the future to develop lubricants and to pursue fresh sustainability initiatives “Castrol Americas Regional President Laura Posadas remarked.
Does BMW use a certain type of oil?
Because of this, BMW advises using only synthetic motor oils in all BMW engines. As a result of the advancement in technology, stronger, more durable fluids and lubricants are now required than ever before.
Is full synthetic oil required for BMW?
BMW advises using synthetic oil in its engines. However, because every automobile is unique, you should consult your vehicle’s owner’s manual to learn which oil is ideal for your particular circumstance.
What happens if you fill a BMW with standard oil?
Even though most natural motor oil is refined from crude oil, it may still include impurities that get past the refinement process. These minute minerals can progressively lead to undesired accumulation in an engine, which can reduce its lifespan and performance. As an alternative, synthetic oil doesn’t have this problem because contamination is not a possibility during the controlled process of synthesizing it with chemical ingredients.
Is BMW oil required for my BMW?
Natural oils can be used in many car brands, however BMWs need synthetic engine oils, with some models having differing requirements than others. Chemical compounds are used to create synthetic oils in a regulated manner, removing impurities. Natural oils can contain pollutants that survived the refining process as they are processed from crude oils.
Even though they are more expensive than natural alternatives, synthetic oils are made to assist clean your engine and prevent buildup, so you can go longer between oil changes. They also function better at both low and high temperatures.
Will any oil work for a BMW?
You don’t have to use BMW-specific oil in your car. Many other brands will function even though this oil will be compatible with your engine.
Make sure the oil you select complies with BMW Longlife requirements. You may find the required oil rating in your owner’s manual.
Since 2009, BMW Longlife-98 oils are no longer in use. For vehicles produced prior to the model year 2002, this oil is advised, although Longlife-01 products can be used in its place.
All vehicles produced after the model year 2002 must have BMW Longlife-01. It is entirely artificial.
Due to their low HTHS viscosity, BMW Longlife-01 FE oils have characteristics that improve fuel economy. Only the N54, N63, N1x, N55, N74, and N2x engines can use this oil grade.
The BMW Longlife-04 is appropriate for cars with diesel particulate filters. As an alternative to BMW Longlife-98 or Longlife-01, you can use this product.
Some gasoline engines, as well as the 2013 model-year Nx701, Nx7k1, and Nx7U1 diesel engines, are compatible with the BMW Longlife-12. Engines with two to three turbos are ineligible for the usage of this oil.
N20 and Bx8 gasoline engines from the model year 2014 are compatible with BMW Longlife-14+.
You can find these requirements in a ton of oil brands, so don’t feel compelled to use solely BMW goods.
Is good engine oil extended life?
When used in engines, engine oil gradually loses quality, necessitating regular replacement. So far, everyone should have understood this, at least those who don’t use electric vehicles. The amount of time between changes is influenced by the oil quality as well as how frequently and for what purposes the vehicle is operated. An engine oil with especially good lubricity and endurance is known as a longlife oil or longlife engine oil. Because it is thinner than typical engine oils, longer periods between oil changes are possible. When purchasing long-life lubricants, you can identify them by the SAE value or the long-life label. This is typically in the 0W-30 to 0W-40 range. However, not every engine can use every longlife oil.
Can I use Castrol 5W30 on a BMW?
Castrol is a powerhouse in the automobile sector. Prior to the Bavarians choosing a different route, this brand had long been associated with BMW.
Before Shell assumed the contract in 2014, Castrol 5W30 was the BMW-recommended lubricant for the M50 family of engines. Even though there are various 5W30 Shell oils available, many M50 owners appear to favor the older Castrol brand of lubricant.
The meaning of BMW LL 04
BMW Longlife 04 lubricants are of the Top Tier lower SAPS1 category. They are made to work with or without particle filters in BMW gasoline and light-duty diesel engines. High HTHS (>= 3.5cP) SAE 5W-30 and 5W-40 based on API Group III and Group IV base oils are the typical BMW Longlife 04 oils.
Any 5W-30 oil will work in my BMW, right?
I’m here. When it comes to the oil(s) they suggest using, BMW is one of the most restricted. There is a predetermined list of oil kinds and brands that are safe to use in BMW automobiles. Your choice of oil may depend on the type of car you drive, its year, and the climate where you reside. BMWas require oil with an API rating of SM or higher; the recommended SAE grade* varies depending on the climate. Some of the suggested lubricants for your 2007 BMW include Valvoline SynPower SAE 5W-30 and Mobil 1 SAE 0W-40. The usage of 0W-40 is recommended if you reside in a chilly area. The 5W-30 Valvolline SynPower is recommended for those who reside in warmer areas.
The informative nature of the aforementioned claims warrants independent verification. kindly visit our
How long can I forgo getting my BMW’s oil changed?
It is advised that BMW car owners get their engine oil and oil filter replaced after 10,000 miles or every 12 months. Although many manufacturers advise doing so every 5,000 miles or six months (whichever comes first)
How do I know when to replace the oil in my BMW?
The oil may need to be changed if your engine seems to be louder than usual while you’re driving or starting it up. If your BMW exhibits “sputtering performance,” this is another simple sign that it needs an oil change.
Does BMW LL04 outperform BMW LL01?
BMW LL01 stands for BMW longlife 1. The formulation of LL04 is for increased exhaust cleanliness as compared to LL01’s. For the new BMW clean dielels with particulate filters, it is essential. Additionally, it has certain extra additives to keep engine internals even cleaner than LL01 does.