It’s uncommon to read of a recall that hasn’t taken place, but that’s the case right now with reference to a Denso automotive parts supplier component.
This supplier to several different automakers made an announcement on the recall of a low-pressure fuel pump that was installed in more than two million vehicles last month. For a total of 3.53 million possibly impacted automobiles, it added 1.5 million more units to that list this week. Being a Toyota subsidiary, Denso’s products will undoubtedly be subject to recalls. However, Honda, Subaru, Mitsubishi, and Ford have also purchased and utilised the gasoline pump.
We don’t yet know which models will be impacted because Denso doesn’t know for sure which vehicles its component will be used with once it is sold. The vehicles that will finally be recalled include models from 2013 through 2020, which is one thing that is certain.
According to Denso, “an impeller in some low-pressure gasoline pumps may get distorted under certain circumstances, which could leave the fuel pump inoperable. Naturally, the vehicle won’t be able to fuel itself if the issue arises while it is moving, which might put the driver in danger.
In This Article...
Which brand of gasoline pump is the best?
The JDMSpeed Universal 12V Heavy Duty Electric Fuel Pump is the component you require if you’re looking for a fuel pump that is adaptable and offers a nearly universal fit. This electric replacement component is remarkably nearly universal. Not only will it function in all 12-volt automobiles and trucks, but also in lawnmowers, boats, carburetors, and generators. It operates as a 12-volt pump with a 1.8-amp current and can pump 70 liters per hour at an output pressure of 3 to 6 PSI. Overall dimensions are 5.91 x 3.54 x 3.15 inches. And this component will function whether the goods or vehicles for which you require a new fuel pump are powered by gasoline or diesel. Due to its 100% brass structure, which can resist corrosion and keep your car (or other gadget) working smoothly, it is also incredibly durable.
Do any fuel pumps come from the USA?
The Carter Fuel Systems program offers premium fit, shape, and function for exceptional vehicle coverage and unique problem-solving features. This results in unique innovation and solutions. Fuel is reliably delivered by Carter Fuel replacement Electric Pumps at the precise pressure and flow rate required by the vehicle. At Carter, we take great pride in the fact that our high-quality heavy-duty pumps are built in the USA at our factory in Logansport, Indiana.
Is Toyota the owner of Denso?
Denso helps Toyota participate in and develop its cars for many motorsports categories because it is a member of the Toyota Group. For the Toyota-Lexus motorsports development divisions Toyota Racing Development and the European racing unit of the business Toyota Gazoo Racing, formerly known as Toyota Motorsports GmbH, located in Germany, Denso produces customized electronics and various car parts. Spark plugs, starter motors, fuel pumps, alternators, Engine Control Module (ECM) computer systems, engine & transmission sensors, and many other high-performance automotive and motor racing equipments and accessories are just a few of the high-performance automotive and motor racing equipments and accessories that Denso specifically designs for Toyota in motorsports. These include NASCAR, Formula One (from 2002 to 2009), World Rally Championship, and many others. In the 2013 24 Hours of Le Mans, the Denso kinetic energy recovery system-equipped Toyota TS030 Hybrid placed second.
Additionally, many regional Japanese motorsports, such as Super Formula and Super GT, use Denso components.
About the Lexus and Toyota Fuel Pump Recall
A total of 1.5 million American cars have been recalled due to potential fuel pump and engine stall issues. Both Toyota and Lexus cars from 2013 to 2020 are included in the recall. There are at least 40 affected models.
According to a Toyota official statement, malfunctioning gasoline pumps might cause stalled engines, which may raise the risk of a collision. Since January 2020, Toyota and Lexus have been subject to continuing fuel pump recalls.
Toyota dealerships that participate in the program offer free fuel pump replacements for Toyota vehicles.
How reliable are aftermarket gasoline pumps?
An aftermarket fuel pump purchase is a major risk. To help the makers save a little money, many aftermarket parts are constructed with subpar materials. Even if you manage to locate an aftermarket gasoline pump, it probably won’t fit your car properly or work well with it.
The best materials are used in the construction of OEM Ford gasoline pumps. Ford gives the quality of its parts a lot of study and consideration. OEM is usually a safer bet when it comes to quality.
Do Delphi fuel pumps perform well?
Delphi fuel pumps were the only components still functioning flawlessly at the end of a rigorous durability test.
An impartial testing lab confirmed Delphi’s dedication to quality in July 2016. Delphi and three other rivals’ fuel pumps for equivalent applications were tested extensively for durability to replicate the corrosive environment of today, including ethanol fuel. The test, which measured flow performance, pressure, and current draw, was carried out at room temperature.
Only Delphi was able to pass this durability test with all of their pumps. While competing units had completely worn down brushes and commutators, the Delphi unit’s brush and commutator wear was even and modest.
According to Kathy Jorge, vice president of Delphi Product and Service Solutions, North America, “Our staff live Delphi Quality and continuously work to offer the highest value for our customers.”
For the end user, the fuel pump’s durability is crucial. It could mean the difference between getting home safely or breaking down on the side of the road. Thus, we can be confident that our goods are displaying the “Delphi Quality” we demand when independent tests confirm the higher performance.
What type of fuel pump should I use?
There are three basic types of electric fuel pumps. A fuel pump will function properly as long as it delivers the flow rate your engine needs at the pressure your fuel-injected or carbureted system demands. Selecting the one that works best for your installation is all that is required.
In tank fuel pump
In tank fuel pumps provide very minimal noise or vibration. Their lifespan is also extended by being soaked in fuel. They come into continual contact with the fuel in the tank, which cools and lubricates them. If the car was not built with an in-tank pump, it may be the most difficult to add one.
In line fuel pump
The least expensive and most straightforward to install are in line fuel pumps. The distance between them and the gas tank shouldn’t be more than two feet. They must be mounted as closely as possible to the level of the gas tank’s base. Higher mounting will result in subpar operation and early failure. They might vibrate and make audible sounds.
Fuel Sump/Surge Tank Systems
A tiny auxiliary tank with an integrated gasoline pump is what is known as a fuel sump system, sometimes known as a surge tank system. They can be installed in the engine compartment, but they require feeding from a mechanical or low pressure electric fuel pump. Systems with fuel sump/surge tanks are a fantastic way to switch from a carbureted to a fuel-injected vehicle. Using the plumbing from your current fuel system may cost a bit more up front, but it could end up saving you money and effort in the long term.
Where are fuel pumps built by Walbro?
Due to COVID-19, all international shipments has been halted with the exception of Canada. As soon as these limitations are eliminated, we will resume worldwide delivery.
The speed, power, torque, and dependability you want are provided by Walbro performance fuel systems. Because of this, Walbro has created high-performance fuel pumps and modules that are specifically designed to satisfy the needs of today’s high-pressure and high-flow engines while delivering effective and long-lasting performance.
With variants compatible with gasoline and E85 flex-fuel, TI Automotive’s award-winning fuel pump technology is available as in-tank or in-line pumps for numerous cars.
The Walbro F90000274 and F90000267 fuel pumps, which have a flow rate of 450 to 485 LPH, are the Walbro TIA450 and TIA485 gasoline pumps. These pumps exceed every in-tank gasoline pump on the market right now and can handle the demands of high octane fuel! Award-winning OE technology developed for E85 ethanol and intended for high performance and high flow. For authorized usage in E85/flex fuel applications, every pumping component has been verified to OEM requirements. Maximum efficiency in high-pressure and high-temperature applications with a dual channel turbine design American-made by TI Automotive (formerly known as Walbro).
The 255LPH high-pressure GSS series in tank gasoline pumps made by Walbro are the GSS340, GSS341, and GSS342. Although the GSL392 is a 255LPH high-pressure fuel pump, it is an inline fuel pump, which means that it is typically mounted outside of the gasoline tanks. The Walbro 255LPH high-pressure fuel pump, which can support 500HP+, is strongly advised for vehicles with engine performance goals. Walbro’s 450LPH and 485LPH High-Performance Fuel Pumps are E85 certified and support 750HP+. (F90000267 / F90000274)
Who makes the fuel pumps for Walbro?
TI Vehicle has been producing Walbro automotive fuel pumps for many years. With a legacy spanning more than 60 years of producing the most well-liked drop-in fuel pumps with the same performance, quality, and dependability that you have come to know and expect, these same pumps are now branded with the TI Automotive name.
How is Walbro made?
Japan’s Tokyo
The Carlyle Group, a leading global alternative asset manager, today said that it has purchased all of the outstanding shares of Walbro Engine Management, a leading maker of minor engine parts, from Sun Capital Partners. The deal’s financial details weren’t made public. The investment’s equity is provided by Carlyle Japan Partners II.
The largest manufacturer of carburetors in the world and a significant producer of fuel and air management components, Walbro is based in Tucson, Arizona, and primarily serves the outdoor power equipment sector. In addition to having manufacturing locations in Thailand, China, and Mexico, Walbro has sizable sales, R&D, and production capabilities in Japan and the US.
Walbro Engine Management’s Chief Executive Officer, Tony Martin, said: “By anticipating customer needs and providing cutting-edge solutions to a world that demands a cleaner environment, Walbro supports international markets with the goal of becoming the market leader in the small engine market globally. This deal is in line with our goal of meeting the rising demands of the global market, and we intend to use Carlyle’s extensive global network to pursue further expansion.
“I am proud of the work of Walbro employees throughout the world in inventing, producing, and marketing innovative products that bring value to our business,” Martin said. “With the assistance of The Carlyle Group, Walbro is positioned for the next level of growth.
We will be able to provide our customers with the solutions and technology they require to tackle today’s environmental and commercial problems thanks to the resources of The Carlyle Group.
Managing Director and Co-Head of Carlyle Japan, Mr. Kazuhiro Yamada, stated, “Strong management oversees Walbro’s remarkable global footprint. To advance Walbro to the next level of product innovation and achieve worldwide growth, we will take advantage of Carlyle’s extensive network and financial capabilities.