In my shop, I had to deal with this only last week. The supplemental restraint system’s SRS light serves as a warning light (airbags). A system issue is indicated by the presence of an SRS light. The fuse for the SRS unit is the first item I would check. This can only be verified with some form of scan instrument. A Solus Pro was mine. The first portion of the numerical error code is displayed by the scanner’s slow flash, and the second portion is displayed by the scanner’s quick flash. You should examine the code and go from there, in my opinion. It will probably display a “non-functional” code; this is a regular issue. In the 2000 Accord EX that I worked on last week, I had to completely replace the SRS unit.
In This Article...
How can the SRS light on a 2001 Honda Accord be reset?
- Make a U-shaped bend in a paperclip. Locate the MES connector on the left side of the dashboard on the driver’s side. It’s yellow.
- Ensure that the ignition is not on. Follow these instructions quickly. Wait no longer than 4 seconds before moving on to the next step.
- Insert the paperclip into the connector while holding onto the U’s bottom. (The connector has two holes, and the paperclip has two tips.)
- Turn the ignition to the ON position while securing the paperclip.
- Eventually, the SRS light will turn off.
- Remove the paperclip. The light will turn on again.
- Reinstall the paperclip. The light will turn off once more.
- Remove the paperclip once more. It should flash twice on the SRS light.
- Switch off the ignition. pause for a few seconds.
- your vehicle off. The SRS light should briefly illuminate before turning off and remaining off.
Visit a mechanic if your light starts to flash again to make sure your airbags are functioning properly.
Why not take a moment to reduce your auto insurance costs while you’re resetting the SRS light? Jerry is a certified insurance broker that can help you quickly and easily get the lowest rates on the coverage you require for your car. Every year, the typical Jerry user saves $879.
Why is my Honda Accord’s SRS light on?
Your SRS, or Secondary Restraint System, is a crucial safety element because it’s made to control the airbags. Have a mechanic inspect your car and ask them if there are any recalls on it to make sure there are no current problems before you reset the SRS light yourself.
Here’s how to turn off the SRS light on a 2002 Honda Accord if you’ve made sure there aren’t any other issues:
- Fuse box is located underneath the steering wheel. To access the fuse box, remove the panel.
- After removing the panel, several wires and connectors ought to be visible. Find the Memory Erase Signal (MES) connector, which is often a two-hole hold plug in green or yellow. Take out the plug.
- Untwist a metal paper clip to create a U shape. Fill the two-hole plug with the paper clip. This will cause the MES connector to short circuit.
- Put your car keys in the ignition to start the engine while keeping the paper clip in the two-hole plug. Never start the vehicle. The SRS light will flash briefly before going out. The two-hole plug and paper clip should be unplugged.
- The SRS light will turn on once more after the paper clip is taken out. To turn off the SRS light, re-insert the paper clip into the two-hole plug. Take remove the paper clip after turning off the light.
The SRS light will blink twice, indicating that the SRS system and light have been successfully reset. However, if your light returns after the system has been reset, you should get in touch with a professional right once.
Consider reviewing your auto policy to ensure you are paying the lowest prices possible for your coverage while you are taking the time to fix your SRS light. Jerry is a free insurance comparison software that checks around for the best deals with more than 50 different insurance providers. You may make adjustments at any time, receive prices instantly, and text an agent with any queries you may have.
What would activate the SRS light?
Your car’s internal computer has disabled the airbags if the SRS (Supplemental Restraint System) indicator remains illuminated. This indicates that there is a problem with the airbags. Although your airbags won’t deploy at random, they might not in the event of an accident, therefore it’s crucial to locate the issue and have it fixed by a qualified repair.
Your car’s SRS light will come on for around 6-7 seconds when you turn the key, then go out if it detects no abnormalities. You may have an issue with the airbags itself, a loose wire, a broken seat belt buckle, or an issue with the Engine Control Unit (ECU) if the SRS light remains on or starts flashing intermittently. To get you back on the road safely, our mechanics at My Auto Solutions in Buford, Georgia, provide airbag module reset, removal, and installation services.
Drive while the SRS light is on?
One should not ignore the airbag light or the SRS warning when they appear. It doesn’t necessary imply that the vehicle is unsafe to operate, but doing so is risky and akin to playing with fire. When this light is on, it indicates that your safety system isn’t functioning properly and, in some situations, that your airbags aren’t functional and won’t deploy in a collision.
Can I drive safely with my SRS light on? The answer is negative, as there is a significant risk if an accident were to occur, even if it is possible that the airbags may still deploy with the light on. We advise having a specialist examine it and identify the problem so that it may be corrected right away.
How can the SRS light be turned off?
When you experience the same problem, you should start by following this technique, which is identical to resetting the airbag light on a Toyota Camry. It needs timing the airbag light and has four straightforward stages that are simple to complete.
First, activate the ignition. Wait for the airbag light to turn on next; it typically illuminates for seven seconds before turning off automatically. After waiting three seconds, immediately flip the ignition switch off. Before starting the engine, go through the basic procedures a couple of times. Your car’s airbag light should illuminate for seven seconds before turning off permanently if everything is done correctly.
How much does resetting an airbag cost?
The overall cost for professional airbag replacement might range from $1,000 to over $5,000 because there are so many parts that need to be fixed or replaced. The cost of labor makes up around a third of the total.
The actual cost is determined by a variety of elements, such as the vehicle’s year, make, and model, the number and location of airbags, as well as the quantity and kind of other components that may require replacement (such as the dashboard, airbag computer, springs, sensors, instrument panel, windshield, and steering wheel).
Obviously, replacing an airbag in a recent Audi or Porsche will cost more money than replacing one in a Honda or Ford that is 10 years old.
Costs for the driver’s side airbag range from $150 to $600 per bag. Costs for the passenger side airbag range from $300 to $800.
Front airbags do not typically have knee airbags or side curtains, but if they do, they must be changed. Budget around the same amount as for a passenger side airbag, though these costs may change based on the size and design of the airbags.
Vehicles having seatbelt pretensioners will also require those to be fixed or replaced after deployment. Pretensioner repairs typically cost between $80 and $120, and new pretensioner parts can cost considerably more.
The ECU or airbag module will at the absolute least need to be reset, which will cost between $50 and $150. Expect to pay between $400 and $1,200 for a new airbag control module if you need one.
Once any deductible has been met, auto insurance is typically able to pay for the cost of replacing the airbag, though frequently the replacement cost is so high that the insurance provider will elect to “total the car instead.”
What does SRS signify on the Honda dashboard?
The Supplemental Restraint System (SRS) Warning Light will illuminate if the system fails to function as intended or does so improperly, according to the onboard computer of the vehicle. When the computer determines the automobile has been in an accident, this system is intended to deploy air bags and tighten seat belts. To reduce the risk of fire, the battery is usually removed and the gasoline pump is usually turned off in newer makes and models. Every time the automobile is turned on, the computer immediately checks the system’s status due to its significance.
What does the internal SRS unit failure mean?
If the SRS unit displays the code 5-1 Internal Failure, the car has been in an accident, and the ACM airbag control module has crash information recorded in it. Any diagnostic scan tool won’t be able to clean or remove this code. The message “cannot run routine” will appear.