In my shop, I had to deal with this only last week. The supplemental restraint system’s SRS light serves as a warning light (airbags). A system issue is indicated by the presence of an SRS light. The fuse for the SRS unit is the first item I would check. This can only be verified with some form of scan instrument. A Solus Pro was mine. The first portion of the numerical error code is displayed by the scanner’s slow flash, and the second portion is displayed by the scanner’s quick flash. You should examine the code and go from there, in my opinion. It will probably display a “non-functional” code; this is a regular issue. In the 2000 Accord EX that I worked on last week, I had to completely replace the SRS unit.
In This Article...
Why is my Honda Accord’s SRS light on?
Your SRS, or Secondary Restraint System, is a crucial safety element because it’s made to control the airbags. Have a mechanic inspect your car and ask them if there are any recalls on it to make sure there are no current problems before you reset the SRS light yourself.
Here’s how to turn off the SRS light on a 2002 Honda Accord if you’ve made sure there aren’t any other issues:
- Fuse box is located underneath the steering wheel. To access the fuse box, remove the panel.
- After removing the panel, several wires and connectors ought to be visible. Find the Memory Erase Signal (MES) connector, which is often a two-hole hold plug in green or yellow. Take out the plug.
- Untwist a metal paper clip to create a U shape. Fill the two-hole plug with the paper clip. This will cause the MES connector to short circuit.
- Put your car keys in the ignition to start the engine while keeping the paper clip in the two-hole plug. Never start the vehicle. The SRS light will flash briefly before going out. The two-hole plug and paper clip should be unplugged.
- The SRS light will turn on once more after the paper clip is taken out. To turn off the SRS light, re-insert the paper clip into the two-hole plug. Take remove the paper clip after turning off the light.
The SRS light will blink twice, indicating that the SRS system and light have been successfully reset. However, if your light returns after the system has been reset, you should get in touch with a professional right once.
Consider reviewing your auto policy to ensure you are paying the lowest prices possible for your coverage while you are taking the time to fix your SRS light. Jerry is a free insurance comparison software that checks around for the best deals with more than 50 different insurance providers. You may make adjustments at any time, receive prices instantly, and text an agent with any queries you may have.
Drive while the SRS light is on?
One should not ignore the airbag light or the SRS warning when they appear. It doesn’t necessary imply that the vehicle is unsafe to operate, but doing so is risky and akin to playing with fire. When this light is on, it indicates that your safety system isn’t functioning properly and, in some situations, that your airbags aren’t functional and won’t deploy in a collision.
Can I drive safely with my SRS light on? The answer is negative, as there is a significant risk if an accident were to occur, even if it is possible that the airbags may still deploy with the light on. We advise having a specialist examine it and identify the problem so that it may be corrected right away.
What would activate the SRS light?
Your car’s internal computer has disabled the airbags if the SRS (Supplemental Restraint System) indicator remains illuminated. This indicates that there is a problem with the airbags. Although your airbags won’t deploy at random, they might not in the event of an accident, therefore it’s crucial to locate the issue and have it fixed by a qualified repair.
Your car’s SRS light will come on for around 6-7 seconds when you turn the key, then go out if it detects no abnormalities. You may have an issue with the airbags itself, a loose wire, a broken seat belt buckle, or an issue with the Engine Control Unit (ECU) if the SRS light remains on or starts flashing intermittently. To get you back on the road safely, our mechanics at My Auto Solutions in Buford, Georgia, provide airbag module reset, removal, and installation services.
How can the SRS light be turned off?
When you experience the same problem, you should start by following this technique, which is identical to resetting the airbag light on a Toyota Camry. It needs timing the airbag light and has four straightforward stages that are simple to complete.
First, activate the ignition. Wait for the airbag light to turn on next; it typically illuminates for seven seconds before turning off automatically. After waiting three seconds, immediately flip the ignition switch off. Before starting the engine, go through the basic procedures a couple of times. Your car’s airbag light should illuminate for seven seconds before turning off permanently if everything is done correctly.
What is the price of replacing an airbag sensor?
Depending on the automobile model and labor charges, the cost to replace an airbag sensor ranges from $100 to $600. A sensor for an airbag costs between $50 and $300, as does the labor.
Both the airbag sensor and its replacement are delicate parts. Even for an expert, correctly diagnosing and installing the airbag sensor can take up to two hours.
The airbag sensor itself is typically not very expensive; you may anticipate paying between $50 and $300 for a brand-new one. Never purchase aftermarket sensors; don’t take the chance. Always purchase OEM original, authentic items.
You can save money by replacing the airbag sensor yourself if you are highly confident working on cars and meticulously following the repair manual.
If you have even the least qualms regarding the replacement, have a pro handle it.
Keep in mind that it is a crucial component, therefore installing it properly is important in case of an accident. Additionally, if you make a mistake, there is a chance that all of the airbags in the car will deploy, which will cost thousands of dollars to fix.
What does it cost to repair the airbag light?
Reset Airbag Light, at No. 1 This procedure typically takes several hours and costs a few hundred dollars, though depending on the car, it might cost as much as $600.
How much does a Honda Civic SRS light repair cost?
Cost estimation for the replacement of the occupant sensor in a Honda Civic. A replacement air bag occupant sensor for a Honda Civic costs, on average, between $974 and $999. While parts are priced at $878, labor costs are predicted to range between $96 and $121.
What does the internal SRS unit failure mean?
If the SRS unit displays the code 5-1 Internal Failure, the car has been in an accident, and the ACM airbag control module has crash information recorded in it. Any diagnostic scan tool won’t be able to clean or remove this code. The message “cannot run routine” will appear.
What does an SRS light mean?
When the SRS light comes on while you are driving, there is a problem with the airbag system of the vehicle. Additionally, it implies that if you are in an accident, the airbags might not deploy. Take your automobile to have the SRS sensor checked as soon as possible if the light illuminates.
The Mercedes-Benz S-Class used a driver-side airbag for the first time in a production car in 1981. Since September 1998, front driver-side and passenger-side airbags have been a requirement for all vehicles and light trucks sold in the US.
An airbag is referred regarded as a passive safety device because the mechanism doesn’t require any activity from the driver to operate. However, the technology and methods that activate airbag deployment have become more complicated over time.
There are numerous varieties of airbags in contemporary vehicles, and each one needs precisely calibrated sensors to deploy. This technology helps to prevent any unnecessary deployment of the SRS system in the vehicle, but it also implies that the system may need to be checked out every so often.
Airbags save lives, and while the original driver-seat airbag has been improved, they are still ineffective if the sensors are malfunctioning. Don’t disregard the SRS light on the dash if it comes on. Your automobile will believe there is a problem until the system has been professionally evaluated, and you could endanger both your safety and the safety of your passengers.
Can the airbag light be reset without a tool?
Without a scanner, most automobile models make it difficult to reset the airbag light. This is a safety warning since, when the airbag light appeared, you should always fix the problem. Fortunately, if you fix the issue, the airbag light will typically also turn off by itself in many automobile models.
However, in some older vehicles, the airbag light can be reset without a scanner by disconnecting the battery wires.
Make that there are no loose wires or rust in the connector plugs in the wiring system under the driver’s or passenger’s seat. Restart your car after spraying an electronic cleaner on the connecting plugs.
If you can’t detect any issues there, you should really invest in an OBD2 scanner or have a shop interpret the codes because otherwise you’ll have to guess what the issue is.
The airbag switch is where?
When the passenger door is open, you may access the switch for the passenger airbag on the passenger side of the instrument panel. Verify that the switch is set to the appropriate position. All front-facing passengers, including children and adults, can securely sit in the passenger seat when the airbag is ON.
What does SRS on a Honda mean?
The Supplemental Restraint System (SRS) Warning Light will illuminate if the system fails to function as intended or does so improperly, according to the onboard computer of the vehicle. When the computer determines the automobile has been in an accident, this system is intended to deploy air bags and tighten seat belts. To reduce the risk of fire, the battery is usually removed and the gasoline pump is usually turned off in newer makes and models. Every time the automobile is turned on, the computer immediately checks the system’s status due to its significance.