- Alternately turning the ignition on and off.
- Air Bag warning lamp illuminates for 7 seconds before turning off, and ignition switch is turned OFF 1 second later.
- Wait for more than three seconds after turning off the ignition switch.
- Follow steps 1 through 3 twice.
- Activate the ignition switch.
- It has been reset the SRS lamp.
In This Article...
Why is my Nissan’s airbag light on?
The airbag light will be on if your airbag has been deployed and has not been correctly reset. When the system detects that it cannot trigger the airbag, the light will turn on if the airbag hasn’t been deployed. This indicates that there is an issue with the airbag system in your car.
I need to know how to turn off the airbag warning light.
The airbag light connects the seat belt system and the airbag system as part of the Supplement Restraint System (SRS) in automobiles (and vice-versa). When you turn on your automobile, the airbag light comes on for around seven seconds before going out, signifying that the internal system check was successful and finished. When the airbag light either never turns on or stays on while blinking, an issue exists. The airbag light needs to be reset at this stage.
Examining seat belt components, fixing bad clock springs, and replacing faulty sensors are a few techniques for turning off an airbag light. New bulbs or a fully charged battery are other options. While most repairs can be done without a professional, others may.
The following 10 steps will reset your airbag light:
- Turn on and off your ignition.
- Test drive your car when it has been restarted.
- Check the airbag switch for the passenger.
- Check to see if the seat belts are in place and functioning properly.
- Check to see if the passenger seat sensor is off.
- Use a scanner with the ability to reset the SRS or airbag light.
- Fix the broken airbag sensors.
- Replace or repair a broken clock spring.
- Check to see if the airbag is working properly.
- seek for a specialist’s help.
Although not exhaustive, the list above includes tried-and-true methods for tackling the problem. Some of them might not apply to your vehicle because compatibility is always based on the year, make, and model. It is recommended that you have your service manual on hand when carrying out any of these fixes. Always follow the manufacturer’s recommendations, too. Let’s get started on resetting your airbag light right away.
On a Nissan Patrol, how do you turn off the airbag light?
I recently owned a Patrol with an airbag light that was flashing. Although I don’t have a diagnostic to reset it, I found a procedure online that worked flawlessly.
It was tried on Anthony’s Patrol and it worked there as well, therefore it is compatible with GU 4.5 and 4.2D.
1) Open the door on the driver’s side.
2) Insert the key into the ignition and turn it to the ON position, but do not start the car.
3) Push the driver’s side door switch button at least five times within seven seconds of turning the key to the ON position. (Yes, the little switch, the one that turns on your interior light when you open the door.)
4) The Air Bag light should turn solid. After at least 7 seconds, it should start to blink in a rhythm of 3 seconds on, 2 seconds off.
5) Turn the ignition off and take the key out.
6) After starting the car, wait for the Air Bag light to go off to make sure it worked.
By removing the battery, is it possible to restart the airbag light?
Without a scanner, most automobile models make it difficult to reset the airbag light. This is a safety warning since, when the airbag light appeared, you should always fix the problem. Fortunately, if you fix the issue, the airbag light will typically also turn off by itself in many automobile models.
However, in some older vehicles, the airbag light can be reset without a scanner by disconnecting the battery wires.
Make that there are no loose wires or rust in the connector plugs in the wiring system under the driver’s or passenger’s seat. Restart your car after spraying an electronic cleaner on the connecting plugs.
If you can’t detect any issues there, you should really invest in an OBD2 scanner or have a shop interpret the codes because otherwise you’ll have to guess what the issue is.
What is the cost of turning off the airbag light?
Reset Airbag Light, at No. 1 This procedure typically takes several hours and costs a few hundred dollars, though depending on the car, it might cost as much as $600.
Can a blown fuse turn on the airbag light?
The car could have blown a fuse, for example. There are other fuses that could be to blame, but fuse #13 is most likely the one. You probably need to change fuse #13 and perhaps other fuses if your airbag light is on and your rear windshield wiper is not working. The airbag light can undoubtedly turn on as a result of blown fuses.
The airbag light may also abruptly turn on in a number of other situations. A mechanic or auto parts store should be able to decipher the code that the airbag system emits when it is acting up, which will give them a hint as to what specific issue the airbag is experiencing. There are numerous potential issues with the airbag because it is a complicated system of sensors, wiring, and programming that must suddenly activate during an accident after lying dormant for years. Check the fuse box to see whether you have a blown fuse first, but if not, you’ll likely need to take it to the dealer or a qualified mechanic for service.
When the airbag light is on, can I drive?
The airbag light may have illuminated for any number of reasons, just like other warning lights. Here are a few of the most frequent causes:
The airbag needs resetting
The airbag light will turn on if there has been a collision but it wasn’t serious enough for the airbags to deploy. At your neighborhood garage, the airbag needs to be reset.
Corroded sensors
The sensors in your automobile may have deteriorated if it has water damage. This would lead to a malfunction in the system and turn on the airbag light.
Dislodged wiring
If your car has side airbags, the passenger side airbag may occasionally malfunction. When the passenger seat is shifted back and forth, the wires for that airbag may become damaged or displaced. We caution against attempting to reconnect a detached plug because you risk setting off the airbag. Make an appointment for your car at a nearby garage and ask them to check it.
Faulty seat belt
Your seat belt sensor can be the cause of the problem. The sensor that determines whether or not you have buckled up can malfunction occasionally. When this occurs, the airbag light can start to illuminate.
Your airbag clock spring may need replacing
The spring is intended to preserve continuity between the wiring and the driver’s airbag and coils throughout your steering wheel. The spring may wear out and fail over time, turning on the airbag warning light. Older autos are more likely to have this flaw.
The important line is that you must stop driving as soon as your airbag light illuminates and have your automobile inspected by a repair as soon as possible. Your airbags won’t activate until the issue is identified and remedied. Never disregard your airbag light since your safety and the safety of your passengers are top priorities.
How much does a new airbag sensor cost?
Depending on the automobile model and labor charges, the cost to replace an airbag sensor ranges from $100 to $600. A sensor for an airbag costs between $50 and $300, as does the labor.
Both the airbag sensor and its replacement are delicate parts. Even for an expert, correctly diagnosing and installing the airbag sensor can take up to two hours.
The airbag sensor itself is typically not very expensive; you may anticipate paying between $50 and $300 for a brand-new one. Never purchase aftermarket sensors; don’t take the chance. Always purchase OEM original, authentic items.
You can save money by replacing the airbag sensor yourself if you are highly confident working on cars and meticulously following the repair manual.
If you have even the least qualms regarding the replacement, have a pro handle it.
Keep in mind that it is a crucial component, therefore installing it properly is important in case of an accident. Additionally, if you make a mistake, there is a chance that all of the airbags in the car will deploy, which will cost thousands of dollars to fix.
How is a Nissan airbag code read?
To read the codes, count the flashes the light makes, then count them again after the pause. For instance, two flashes, a pause, and four flashes indicate a code 24 issue with your airbag system. Codes 12 and 13 indicate low battery voltage and a shorted or grounded airbag circuit, respectively.
Are Nissan airbags subject to a recall?
Due to a problem with the frontal inflators on the driver’s or passenger’s side, Takata airbags are being recalled. The majority of the affected automobiles are those manufactured between 2002 and 2015, including several Nissan models.
How can the airbag light on a 2008 Nissan Altima be reset?
How to turn off the airbag light on a 2007-2009 Altima
- From off to on, press the ignition switch.
- For approximately 7 seconds, the air bag warning light will be visible before going out.
- then instantly depress the ignition key to turn it off.
- Wait for roughly 6 seconds after turning off the ignition switch.
The airbag switch is where?
When the passenger door is open, you may access the switch for the passenger airbag on the passenger side of the instrument panel. Verify that the switch is set to the appropriate position. All front-facing passengers, including children and adults, can securely sit in the passenger seat when the airbag is ON.
What does the phrase “service air bag” mean?
It can mean that the light needs to be reset since it was accidentally turned on. If so, the air bags will function and safeguard you and your passengers in the event of a collision. Unfortunately, the light could also come on as a result of more serious problems. The airbag’s battery backup failed.