When you’ve already taken care of the maintenance, though, maintenance lights can be an annoyance rather than a helpful reminder. Depending on what year your Nissan Altima is, there may be a different procedure for clearing the maintenance oil change light, but in general, you should be able to do so by using the maintenance choices accessible in the settings menu on your dashboard.
The 2015 Nissan Altima’s oil change light can be turned off as follows:
- Choose Reset.
- Select Other from the Maintenance menu by returning there (the second option below Service)
- To access the Maintenance menu, scroll down and click it.
- Choose Service
- Launch your dashboard’s settings menu.
The 2019 Nissan Altima’s oil change light can be turned off as follows:
- Reset by pressing the OK button on your steering wheel, then choose Yes to affirm.
- Choosing Maintenance
- Select a system to control oil
Your oil change light ought to go out when you reset your maintenance mile counter.
Hope this is useful! As you continue to take care of your Nissan Altima, you’ll also want to make sure it’s insured properly. Jerry can assist you in handling that quickly!
Simply submit your information, and Jerry will compile customised estimates from the best insurance companies in one location for you. You can then select the appropriate level of coverage at the appropriate cost.
The typical Jerry user saves $887 a year on their auto insurance and it only takes a minute to get started!
In This Article...
What does “maintenance oil and filter” mean on your car?
Why does that matter? The foundation of the majority of planned maintenance plans is the oil and filter change. Any planned maintenance program or maintenance reminder system should take this into consideration because the oil needs to be changed more regularly than any other consumable.
What does the 2011 Nissan Altima’s service engine soon light mean?
Engine of Service A Nissan Altima’s dashboard will soon have a warning light that flashes when there is an issue with the vehicle’s emissions system.
The Service Engine’s most frequent cause A defective oxygen sensor is the most common reason for the soon light to come on, but it can also be brought on by misfires or problems with the catalytic converter.
If your vehicle’s Service Engine Soon light illuminates, it’s crucial to have it diagnosed by a qualified mechanic. Alternatively, you can use an OBD2 scanner to detect the issue yourself and have it fixed as soon as possible.
What does “maintenance tire” on my Nissan Altima mean?
When your Nissan’s tire maintenance light comes on, it’s time to rotate the tires as part of your normal maintenance program.
How can the oil life of a 2006 Nissan Altima be reset?
- Use the buttons on the left side of the steering wheel to navigate the menu until you reach the Settings screen.
- Scroll down to Maintenance using the joystick, then choose it by using the ENTER key.
- Click Service, then enter.
- Repeat using the joystick to emphasize Reset, then hit ENTER.
- The mileage ought to be set to 0.
- To return to the previous menu, press the back button on the steering wheel.
- In case the tires were rotated, repeat steps 3-5 for Tire.
2007-2012:
*There are two buttons on the vehicle information display: an ENTER button (which resembles two overlapping boxes) and a NEXT button (which resembles a single circle or dot).
- the ON position on the ignition switch
- Press the ENTER button continuously until the Setting mode appears to cycle through the other modes.
- By pressing the NEXT button, access the Setting mode.
- Once the Maintenance option is highlighted by pressing the NEXT button, choose it by pressing the ENTER button.
- Press the NEXT button to select the required field (Engine Oil, Oil Filter, or Tire), and then press the Input key to enter the field.
- Press the NEXT button twice, then press ENTER to select the Reset option.
- In order to reset, hit ENTER after selecting the mileage by pressing the NEXT button once.
- Ensure that 0 is displayed next to the mileage.
- For the Oil Filter field, repeat steps 4–7. (and Tire field if tires were rotated)
(Only with navigation) 2005–2006
- When you press the TRIP button under the display, the Options menu will appear.
- Press ENTER on the joystick after using the center joystick to navigate to the Maintenance menu.
- Using the joystick, pick Engine Oil, then press ENTER to choose.
- Highlight Press ENTER after using the joystick to reset.
- If the tires were rotated, follow steps 3-5 again.
What does the 2012 Nissan Altima’s service engine soon message mean?
When the check engine light on your 2012 Nissan Altima starts to flash, it implies there is an urgent issue that has to be fixed, and your Nissan should be brought in right away. Usually, a serious engine misfire that causes unburned fuel to escape into the exhaust system is indicated by this blinking light.