European Concentrate Antifreeze/Coolant Pentosin-Pentofrost NF (G11) Silicate – 1.5 Liters (Part No. 8114117)
In This Article...
SERPRESULT
Older coolants don’t last as long as newer ones, which use Organic Acid Technology (OAT).
Normally, you should have a coolant flush performed on your 2015 BMW 328i every 30,000 miles or every two years.
In relation to vehicles, coolant is often a liquid or gas material used to control the engine’s temperature.
Peak 1 gallon Yellow 50/50 Antifreeze; Coolant * PEAK50/50LL * 4 for the 2013 BMW 328i xDrive is vehicle-specific.
Use the up and down arrows to check any autocomplete results that are available, then press Enter to choose.
What kind of cooling fluid does BMW employ?
No matter what type of car you drive, whether it’s a BMW, Porsche, Mercedes Benz, Audi, Mini, or Volkswagen, your car circulates a solution of water and coolant to dissipate the heat generated within the engine and prevent it from completely melting down (one notable exception are older Porsche models that are air and oil cooled and did not use water or coolant, but instead circulated a large amount of oil to dissipate the heat).
A Spectrum of Colors
Which coolant type is best for your BMW, Porsche, Mercedes Benz, Audi, or Volkswagen out of the many available options? The answer is the kind that was initially installed in your car. Your coolant may be green, pink, blue, yellow, or even clear depending on the manufacturer. All coolants are naturally transparent, and dye is used to give them color. It has no impact on the coolant’s chemical properties that each producer adds their own colour blend. Because the water in Europe is substantially harder than the water in the United States, European manufacturers prefer coolant that is phosphate-free.
Inorganic Acid Technology (IAT), Organic Acid Technology (OAT), and Hybrid Organic Acid Technology (HOAT) are the three most common coolant types available today. A HOAT coolant is used by your BMW, Porsche, Mercedes Benz, Audi, or Volkswagen.
In order to protect aluminum surfaces, silicate is added to OAT coolants to create HOAT coolants. The cylinder heads and radiators, as well as other parts of your BMW, Mercedes Benz, Porsche, Audi, and Volkswagen engine and cooling systems, are constructed of aluminum.
Silicate and phosphate corrosion inhibitors are not used in OAT coolants. These coolants are made to last for 150,000 miles and have a long service life (or 5 years). It should be mentioned, nevertheless, that German Auto Center and the majority of manufacturers advise cleansing or replacing the coolant every two years.
The metal (Iron) components of the engine and cooling system are protected by traditional coolants, which are IAT coolants and use silicate and phosphate corrosion inhibitors. IAT coolants shouldn’t be utilized because the majority of the iron components in your BMW, Mercedes Benz, Porsche, Mini, Audi, and Volkswagen have been replaced with aluminum and other lighter composites.
It’s crucial to keep in mind that modern German performance cars, whether you drive a Porsche, Mercedes Benz, Mini BMW, Volkswagen, or Audi, will last you for many miles and years if you maintain them properly. German Auto Center in Austin is the place to go for German auto repairs. We will be pleased to help you!
Is special coolant required for BMW?
In addition to controlling engine temperatures, the quality of your BMW coolant is essential for lubricating the water pump, guarding against corrosion and buildup, providing anti-freeze during the winter, and, in some models, assisting in cooling for engine and gearbox oil coolers. Not just any antifreeze will do; BMWs have special coolant needs (nitrite and phosphate free) to prevent build-up and corrosion of metal components. Along with BMW coolant, we also sell coolant additives like Red Line Water Wetter, which lower combustion chamber temperatures and elevate boiling points in order to prevent detonation and banging.
Why is the coolant in my BMW low?
You should take your automobile to the automotive service shop as soon as possible for an inspection and maintenance if your coolant is low because it could be an indication of a larger issue. Some of the causes of a possible coolant shortage in your car include the following:
- reservoir leak or overflow tank
- a radiator leak
- radiator hose leak
- water pump leak
- cracked or compromised radiator seal
- defective head gasket
Can BMW use Prestone coolant?
The best formula for every BMW (r), every Mini (r), every Volvo (r), every Mercedes (r) older than 2014, every Volkswagen (r), every Audi (r), every Jaguar (r), and every Porsche (r) older than 1996. This technology controls the temperature of your engine, prevents it from freezing, and shields it from corrosion.
Why is blue coolant used by BMW?
The majority of coolant manufacturers in East Texas, where we can experience a wide variety of temperature variations throughout the year, offer an engine coolant that is a 50/50 combination.
In order to receive the greatest cooling benefits for our Texas climate, BMW “Blue Coolant” must be mixed and added to your cooling system in the right manner. This calls for a coolant flush and refill procedure that removes air and old coolant from your system to improve engine safety.
Because it is silicate and phosphate free and has a far longer lifespan inside of your car’s cooling system, we advise using BMW “Blue” coolant in your vehicle.
Come in right away to pick up a gallon of fuel, or let us repair the cooling system in your car in time for the Texas heat.
Will water mix with BMW coolant?
If your engine is overheating, the coolant overflow reservoir is very low or empty, and you have no other choice, you can pour water into your car’s radiator.
This should only be done while traveling a short distance, and you should make sure that the radiator is cleansed and properly supplied with coolant and water when you get there.
Natrad offers you top-notch cooling products and guidance. Stop into Natrad to get the appropriate coolant for your car.
How often should I change the coolant in my BMW?
How frequently should a BMW have its coolant changed? Typically, every 30,000 miles or every two years, you should have a BMW coolant cleanse conducted. Your car may be able to go longer between flushes in specific circumstances.
Can you combine blue and green coolant in a BMW?
It appears that they can coexist, with green being able to mix with blue-filled cars but not the other way around. HT-12 can be used in any vehicle that currently has G48 coolant (blue), but G48 shouldn’t be used in vehicles that were initially filled with HT-12. This information was copied from getbmwparts.com.
What occurs if the incorrect coolant is used?
The performance of the car can be hampered if the wrong coolant is used or if several types are mixed together. Additionally, the radiator’s corrosion may worsen. It’s crucial to remember that color alone cannot accurately identify the type of coolant you should use. The radiator, water pump, radiator hoses, cylinder gasket, and other components can suffer corrosion and other issues as a result of using the incorrect coolant. Having a qualified auto mechanic handle your vehicle’s maintenance is the greatest method to guarantee that you obtain the right coolant.
What is coolant in blue?
The only possible meaning of a blue engine coolant temperature signal is that your coolant, or antifreeze, is too cold. In fact, the temperature is so low that your radiator could become too cold, which would prevent your engine from starting since it would freeze up.
What distinguishes blue coolant from green coolant?
There really isn’t much of a difference in terms of performance benefits because both coolants will function equally well in your Nissan. Nissan Green is likely what we would choose because it is concentrated (making it slightly less expensive) and because we believe that changing the coolant more frequently is preferable for preventative maintenance.
Can the incorrect antifreeze cause an overheat?
Your coolant has a problem. If the incorrect coolant was used in your vehicle or you have an unsuitable coolant-to-water ratio (50/50 is ideal), your engine may be more susceptible to overheating.
Is it acceptable to mix green and blue coolant?
Let’s address the big question: Can you combine different brands? now that I’ve clarified what goes into coolants.
Yes, that is the response. Peak can be blended with Zerek or Prestone, but only if they are both the same chemical type of coolant. The ratio is less important, but the type and application must be compatible.
The simplest method to keep this in mind is to try to pair together like types: IAG with IAG, OAG with OAG, and HOAT with HOAT.
However, it’s qualified and depends on getting things to match as closely as you can, just like anything else. Combining various antifreeze or coolant brands may reduce their corrosive effects and endanger your engine.
There will be times when you won’t have an option but to use various coolant or antifreeze brands. as when you go to a hardware store or gas station and discover that the brand you typically buy is sold out.
The safest course of action in that case is to drain the old coolant and replace it with the safest coolant or antifreeze you can locate.
In a pinch, however, you can use the closest match, particularly if it’s temporary.