By simultaneously pushing the Lock and Remote Start buttons within three seconds, the Remote Start feature can be used. Your Hyundai will be inspected by the system to determine whether it is safe to start it. If it is, the engine will start after 5 seconds and run for up to 15 minutes. To turn off the engine, press and hold the Start button once more for two seconds.
In This Article...
How to use the Hyundai key fob’s remote start
It could initially seem self-explanatory. Your key fob has a remote start button, but using it doesn’t just involve pressing a button. You must lock the doors with the key fob before pressing the remote start button (even if the doors are locked already).
Hold the remote start button after locking the door for 4 seconds. Holding the button down for at least two seconds is necessary for it to function. Your Hyundai’s parking lights will blink in response to each command.
The heating and cooling systems in your Hyundai will operate until the pre-set temperatures once it is started. If no additional action is taken after 10 minutes, the car will again switch off. The car will turn off once again if you press the remote start button once more.
FAQs
Press the lock button on your key fob while holding down the remote start button to activate the remote start function for your Hyundai Elantra. Alternatively, utilize the Blue Link Remote Package and your smartphone. When your parking lights flash, you’re all good to go! A
Sometimes getting into your car is about the last thing you want to do, whether it is 115 degrees and sunny or 15 degrees and snowy. Thankfully, technology has saved the day! You may start your Hyundai remotely in advance and start your commute without risking burning your hands or freezing your buns thanks to this feature. A
Setting up MyKey Premium
MyKey Premium is 100% plug-and-play in Hyundai and Kia cars with the push button start capability, in contrast to the typical aftermarket remote start system. Simply unhook a few factory wiring harnesses and put in the MyKey Premium harness, with one end connected to the control box. The system is made up of a control box and a number of wiring harnesses.
The MyKey Premium installation was completed until that point. The system (or key fob) does not require reprogramming. Your Hyundai or Kia vehicle will start and keep running for 15 minutes with the doors locked if you simply press the lock button twice on the fob. Just unlock the doors as usual once you get at your car. From there, all you have to do is depress the brake pedal, engage the gears, and take off in a car that will keep you warm in the winter and cool in the summer. The engine will shut off automatically after 15 minutes if you don’t get in your car.
Although the control box and wiring harness installation is straightforward, MyKey Premium offers worldwide shipping, a PDF installation guide, and informative videos of the product being fitted in a variety of Hyundai and Kia cars.
How do I start my Hyundai Sonata remotely?
You are in for a treat if your Hyundai Sonata has a remote start. However, you must understand how to use it in order to make use of this functionality. The procedures are outlined below!
Follow these instructions to remotely start your Hyundai Sonata:
- Begin by using the Bluelink app or fob to lock the doors [even if the doors are already secured].
- Hold down the remote start button after that.
- Before the car starts, the headlights and turn signals will flash.
- After operating for 10 minutes, the Hyundai Sonata will shut off.
- Press the remote start button once more to stop the car.
No matter the weather, having a remote start is a useful feature. We’ll look more closely at how and when to use the remote start option in your Hyundai Sonata in this post. Continue reading for answers to more frequently asked questions about the Sonata’s remote start.
Let us first state that we hope you find the links provided here beneficial before you continue reading. We may receive a commission if you buy something after clicking on one of the links on this page, so thank you!
Have Hyundai vehicles remote starters?
A subscription to Bluelink Remote Package is necessary. Only automobiles with an automatic transmission or a dual clutch transmission that are equipped with push button start are eligible for remote vehicle starting. Not offered on all trims and models. Use Remote Start only if it is secure to do so.
With only a few taps on the app or a simple command to Alexa, you can remotely start your Hyundai’s engine, adjust the temperature inside, and turn on the defroster.
Can you damage your automobile with a remote starter?
This is a typical misunderstanding of remote starters. It’s not accurate, and it’s unknown why individuals are led to believe this. The general opinion among mechanics is that remote starts are beneficial for your engine, particularly for those who have turbocharged or diesel motors.
Because they warm up the engine before usage, remote starters are beneficial for your vehicle’s engine. The oil in your car thickens in cold weather. The viscosity of the oils is increased during engine warming to ensure proper circulation. Thus, preheating your engine makes your drivetrain last longer.
How is a Hyundai key fob programmed?
- As soon as you get inside your Hyundai, check that all the doors are closed.
- Put your Hyundai’s ignition in the “ACC” (accessory) position using your key.
- Keep pressing the “open” or “unlock” button on the key fob until the light on your car starts to flash.
- Congratulations
If my automobile has remote starting, how can I tell?
You must first check at your key fob to see if you have the remote start option. The remote starter button has an arrow-like form.
If your key fob has this button, your car has remote starting capability. Press the button that locks the car once to try remote starting. Your engine will start when you press and hold the remote-start button for at least four seconds.
The climate control and parking lights will turn on as soon as the engine begins. Additionally, the heated/ventilated seats and the rear window defroster may turn on. You must only move out of park after pressing the start button on the dashboard since this function starts the engine but does not switch on the ignition.
Press and hold the button with the curved arrow on it to turn the engine off if you change your mind. Parking lot lights will go out.
How can I tell if my Hyundai is equipped with blue link?
Which Hyundai models come with Blue Link? The majority of Hyundai cars from 2013 and later are now equipped with Blue Link, which first debuted on the 2012 Sonata. Blue Link is not available in vehicles manufactured after 2013, such as the 2013-2017 Accent, 2013 Elantra sedan, and 2013 Tucson.
Why won’t my automobile crank over?
A fading or dead battery, frayed or corroded connecting cables, a defective alternator, or a problem with the starter are the common culprits when a vehicle won’t start. It can be challenging to distinguish between a battery or alternator issue.
How come my remote start doesn’t function?
Check your usage of the remote if your remote starter isn’t functioning. Replace the battery in your fob if your remote starter system isn’t functioning properly. Batteries Plus sells replacement key fob batteries. The majority of remote starter fobs are powered by 2032 lithium coin cells.
With your Hyundai key fob, are the windows able to be rolled down?
You might not be aware of all the functions your Hyundai key fob is capable of, like rolling down your windows while standing outside the car. Even better, if your battery dies, the mechanical key inside your key fob will still work.
You could become daunted by the quantity of features offered when you visit the showroom to buy a new car. It’s simple to overlook the functions your key fob is capable of, from user-friendly infotainment benefits to cutting-edge driver assistance technologies. A
What distinguishes remote start from push start?
Compustar remote starters employ a safe, exclusive technology called KLON* that imitates your vehicle’s smart-key signal to start your engine on the majority of push-to-start automobiles. As a result, your push-to-start vehicle’s engine will start when you remote start it as if your smart key were present inside.
Is remote starting the same as push-button starting?
When installing a remote starter, many consumers wonder if their push-to-start system would continue to function as before. The vehicle should continue to function as intended, and you shouldn’t notice any differences, is the answer.
Your interactions with the car, however, may differ slightly based on the system you select. For instance, while starting a vehicle using a remote, the user might occasionally need to press the button on the starter to unlock it.
Additionally, depending on the model, the engine may turn off as you open the door to get into the vehicle. Simply use the push-to-start system to start the car, then proceed to drive as normal.
Most of the time, you won’t notice any differences in how you use or operate the vehicle.
What causes my auto start to stop?
Engine checking is the most frequent cause of a car starting, then quickly stopping. Your car’s voltage or tachometer signals are monitored by the Compustar and Arctic Start systems to determine when the vehicle has started.
Every key fob has remote starting, right?
If you spot a button with a clockwise-moving circular arrow, you’ll know it’s there. That is the remote engine start button, though the key fob itself does not have a label for it. For those who are already familiar with this button’s use, it involves hitting the lock button first, then the remote engine start button. No problem, isn’t it? Other key fobs include a button in the same location, but they have a different sequence for remotely starting the engine. For instance, Ford key fobs have the same circular arrow emblem with “2x” inside the circle (other key fobs are labeled “X2,” which implies the same). This informs you that in order to remotely start the car’s engine, you must click the button twice. This button is frequently seen in many key fobs, therefore it’s not really thought of as a hidden feature. However, certain automakers, primarily BMW, have introduced redesigned key fobs without the button. However, this does not imply that these key fobs lack these functionalities merely because there isn’t a circular arrow button to click. By rapidly pushing the “lock” button on the key fob, one can remotely start an engine in a new BMW by doing so. You don’t need to become daring and try out this sequence to test if the engine activates after pushing the lock button three times in a single second if your key fob has the circular arrow button. However, if it doesn’t, it won’t harm to try it out and see if it manages to complete the task in some way.