You can locate the radio code for your particular Honda Accord in one of several ways: For the code, go inside your glove box or in your owner’s manual. Along with the radio’s serial number, it ought to be on a sticker. Visit Westbrook Honda’s Service Center to have one of our qualified technicians look up the code for you.
In This Article...
How can I locate the radio’s code?
People frequently ask drivers for their car radio codes. There is still a strong probability that the code can be located while still in the driver’s seat, even if you purchased an older used automobile.
First, try these locations:
- Glovebox On a label in the glove compartment, there are some radio codes.
- Dealership
- The solution might be kept by an authorized dealer. To establish that you are the vehicle’s owner, you’ll generally need to have your logbook or V5C paperwork on hand.
- vehicle manual
- The code may be located under the sections on security or the stereo in your car’s owner’s manual. Alternatively, some codes can be located inside the manual on a small piece of paper or a plastic card.
- former owner
- You might try contacting the prior owner if you purchased the car used. Check to see if they wrote down the code or saved an original copy.
- Manufacturer website
- You may find additional details on how to get the code on the manufacturer’s website. For assistance, you might be sent to a licensed dealer.
How can I remove the Honda’s radio code?
Disconnect the black negative under-hood battery cable for one to three minutes to reset the system if the radio displays an error (ERR) message. RESTART THE RADIO AND LISTEN FOR THE WORD “CODE.” THE 5 DIGIT RADIO CODE MUST BE ENTERED. TURN OFF THE RADIO AGAIN.
How can I locate my Honda radio’s four-digit code?
4) Check your center console and glove box. In the glove box or center console of select Honda vehicles, you’ll discover a four- or five-digit number that indicates your Code or an eight-digit number that reflects your Serial Number.
What is the radio code for my Honda?
The radio code is usually listed on a tiny white sticker inside the glove box of Honda vehicles. The “Anti-Theft Radio Code” label will be placed on the five or six digit code. Using the preset radio buttons on your radio, enter this code. The radio will beep before returning to its regular operation.
Do not worry if your glove box does not have a radio code. It’s still accessible. You’ll need your radio’s serial number first, though.
How can I unlock the radio in my Honda Accord?
Using the radio preset buttons, enter the code. In this case, you would press “3 three times, “5 once, and “1 once if your Honda Accord’s audio system code is “33351. The audio system in your car should now be unlocked and reset.
With no code, how do I open my radio?
Approach 1:
- Start the engine.
- If CODE appears on the screen, turn off the radio.
- For 40–50 seconds, hold down the Power/Volume button.
- In less than a minute, your radio ought to be unlocked.
How is a dead battery reset on a Honda radio?
To obtain your radio code, follow the instructions below. If you are still unable to unlock your radio, visit your nearby Honda dealer for assistance or call Honda’s customer care department at 1-800-999-1009.
Why is my Honda asking for the Honda radio code?
When you replace the battery, your Honda will frequently ask for a radio code. The radio will request the code each time the battery is disconnected or becomes entirely dead. The radio will typically automatically reset and resume functioning properly if you simply press and hold the power button for two seconds. You won’t need to enter the code. You will need to enter the Radio Code if this doesn’t work.
How to retrieve the Honda radio code.
- The owner’s manual or glove box are the first places to seek for the radio code. The code is on a sticker that is typically adhered to or put inside the glove box. You may also stick it in the owner’s manual. The radio serial number will also be printed on this sticker. A rendering of what it will look like is on the left.
- You can also take it to your neighborhood Honda dealer, who will be able to take care of it for you, to recover the radio code.
- You may also look it up online using the link below if you can’t go to a Honda dealer.
How do I re-battery my radio?
If none of these guides proves successful for you, your last resort is to stop by a nearby car radio installation shop. Depending on the model of your radio, they might be able to unlock it.
You’ll recall that I said I’d demonstrate how to bypass automobile radio codes. This trick was something I recently discovered, therefore I choose to share it with you in this blog. This hack has been tested on Honda and Acura vehicles, and it is effective. The Acura ILX, Acura TLX, Acura RDX, Honda Pilot, Honda Civic, and Honda Accord are the specific models that this technique will work on. These automobiles must be 2010 model year or newer.
- The radio power button should then be pressed and held down.
- If CODE appears, turn on your audio system and check it. If it does, stop using it.
- Make sure your ignition is in the ON position if you want to bypass the radio security codes on these cars.
- It must be held for around 40 to 50 minutes. Your automobile audio system will come on and bypass the code at this time.
The makers of your cars don’t want you to know about this trick. Yes, I did precisely that. How to unlock the Ford radio without a code is a different hack I want to share with you. The above trick and this one are similar. On a Ford BA, I watched it operate. However, you can give it a shot on other Ford models to see how it turns out.
- For roughly 50–60 minutes, press and hold both the SEEK and audio power buttons. Without requiring the radio code, it will then switch on.
- You must turn your ignition to the ON position in order to accomplish this.
- Check to see if your radio shows CODE or LOC when it is turned on. Turn off the radio if it does.
Is the VIN number a source for radio codes?
You normally input your VIN, the radio’s serial number, and contact details like your phone number and email if the company that developed your car supports online code lookup. You could receive the code by email for your records.
After installing a new battery, how do you reset my Honda radio?
The radio in your car might not work properly after you replace the battery. Fortunately, after changing the battery, you can reset your Honda’s radio by following these instructions:
- Turn off the radio once more after ten seconds.
- Your radio ought to reset when you enter the code.
- Hold down the power button while waiting for the radio display to come on.
- One click before to starting the engine, turn your key to the ON position.
- To start the radio, turn the volume knob.
- You must enter your radio’s code, which may be found in your owner’s manual, if the Enter PIN message is displayed on it. The preset buttons on the radio can be used to enter the code.
These instructions ought to enable you to reset your Honda radio. However, if the radio is still giving you problems, consult your owner’s manual for more information or take it to a Honda dealer for a quick fix. Reset your radio while you’re at it, then use the Jerry app to save money on your auto insurance.
The Jerry app, a certified broker, assists users in saving $879 annually on auto insurance on average. Simply download the app, respond to a few few questions, and Jerry will send you free personalized quotations from more than 50 of the industry’s leading companies, including Progressive and Allstate.
Why does the radio in my car want a code?
A brief string of numbers known as a car radio code is connected to a security feature found in some head units. By rendering a stolen head unit useless when it is unplugged from the battery, it serves as a deterrent to theft. However, if your battery dies, this feature also activates.
How can I retrieve my 2009 Honda Accord’s radio code?
The radio code for your Honda Accord can be obtained in a few different ways:
- For the code, check your owner’s manual or the glovebox. It’s on a sticker next to the radio’s serial number.
- Visit Fisher Honda, a Honda dealership close to Denver, for service.
- By using the OEM website, get your code online.