What Is The Code For A 2002 Honda Accord Radio?

Honda / By

To get the Honda radio code, you will require the following details.

  • Code Zip
  • Mobile Number
  • Email
  • Vin Number (The VIN number can be found on your registration as well as on the bottom of the windshield and the driver’s door jamb).
  • Series No.

If your Honda is from 2002 or later Set the car’s ignition to “on.” To start the radio, simultaneously press the preset buttons 1 and 6. On the radio display, there will be a 10 digit serial number. The serial number of your Honda can be found on the radio unit’s body if it was manufactured in 2001 or earlier. To view the code, the radio unit must be removed. At this point, unless you are certain that you can take out and put back in the radio unit without harming it, you might want to bring the car to your neighborhood Honda dealer.

How to Enter the Honda Radio Code

Use the radio preset buttons to enter the Honda radio code once you’ve located or obtained it. You should be able to use the radio again after entering the code.

What is the Honda radio code?

The Honda Radio Code Retrieval Look inside your glove box for a sticker with the radio code; alternatively, consult the owner’s manual of your car on the sticker. The same credentials used for your Honda Navigation system will also be required for your Honda radio code, which has a specific serial number.

What is the radio code for my Honda Accord?

Here are several methods for locating the radio code for your Honda Accord: The simplest method is to consult your owner’s manual or the glovebox. Your radio code is on a sticker that has a serial number, which you can see. Certified professionals are available to assist you at the Honda service shop at Weir Canyon Honda close to Irvine.

Without the code, how can I open my car radio?

Approach 1:

  • Start the engine.
  • If CODE appears on the screen, turn off the radio.
  • For 40–50 seconds, hold down the Power/Volume button.
  • In less than a minute, your radio ought to be unlocked.

The radio on a 2002 Honda Accord has to be reset.

Even if it may not be the most essential component of your automobile, the radio adds a lot of enjoyment to the entire driving experience. Fortunately, you can reset the radio in your 2002 Honda Accord by following these easy instructions:

  • Your ignition should be in the ON position.
  • Press and hold the volume knob for roughly 10 seconds after turning on the radio.
  • Press and hold the radio knob for roughly five seconds after turning the radio off. Enter PIN should now appear on your screen.
  • Your radio code can be found on a small white label inside your glove box. To input it, use the radio preset buttons.
  • then restart your vehicle.
  • Check the radio.

These instructions should enable you to fix the radio in your 2002 Honda Accord. But if your sound system keeps giving you trouble, it might be an issue with your speakers. You would be best served in such situation to have a mechanic examine your vehicle.

Start saving on auto insurance with Jerry to help defray the expense of expert repairs. The Jerry app, a certified broker, assists users in saving $879 annually on auto insurance on average. Simply download the app, respond to a few questions, and Jerry will get you individual quotations from more than 50 of the industry’s leading companies, including Nationwide and Allstate.

How can I reset the radio code on my Honda?

These easy steps can help you find the radio’s serial number in your Honda. To record the serial number of your radio, make sure you have a pen and paper nearby. Alternatively, you can use the Notes app on your smartphone.

  • The ignition should be turned on (ON or AUX), but the engine shouldn’t be started.
  • Turn off the radio to ensure that CODE or ERR are not displayed on the screen.
  • Press and hold the one (1) and six (6) buttons on your radio with one hand at the same time.
  • Turn on the radio with your free hand while pressing the one and six radio buttons.
  • An eight-digit serial number or two smaller serial numbers, which on older models might be separated by a dash, should be visible.
  • Release the radio buttons, then write down or type the serial number into your mobile device or piece of paper.

How can I reset the radio in my Honda Accord?

When you change the battery in a newer model year Honda Accord SE, the radio is almost always reset. To correct it, though, you don’t always need a radio code.

Hold the power button down for three to five seconds to reset the radio code on a Honda Accord. This should make a code unnecessary.

Try one of these methods if the soft reset described above fails to resolve the problem:

  • Take a trip to a Honda dealer with your Accord.
  • Dial 1-800-999-1009 to reach Honda.

It’s more pleasurable to run errands and commute when you’re listening to your favorite music or podcasts while driving. The only thing that could make it more exciting would be to walk away with hundreds of dollars after using the Jerry app to compare car insurance rates.

Jerry is an authorized broker who can quickly compare prices from numerous insurance companies. Jerry can assist you get your new coverage and even cancel your previous policy when you discover a lower cost for your Honda Accord SE.

How can I unlock the radio in my Honda Accord?

Use the radio preset buttons to enter the Honda Accord radio code when you’ve located it. If the audio system code for your Honda Accord is “22271, for instance, you would press “2 three times, “7 once, and “1 once. Your car’s audio system will be unlocked and reset as a result.

Is the VIN number a source for radio codes?

You normally input your VIN, the radio’s serial number, and contact details like your phone number and email if the company that developed your car supports online code lookup. You could receive the code by email for your records.

How can I acquire the radio code for my Honda without the serial number?

To obtain your radio code, follow the instructions below. If you are still unable to unlock your radio, visit your nearby Honda dealer for assistance or call Honda’s customer care department at 1-800-999-1009.

Why is my Honda asking for the Honda radio code?

When you replace the battery, your Honda will frequently ask for a radio code. The radio will request the code each time the battery is disconnected or becomes entirely dead. The radio will typically automatically reset and resume functioning properly if you simply press and hold the power button for two seconds. You won’t need to enter the code. You will need to enter the Radio Code if this doesn’t work.

How to retrieve the Honda radio code.

  • The owner’s manual or glove box are the first places to seek for the radio code. The code is on a sticker that is typically adhered to or put inside the glove box. You may also stick it in the owner’s manual. The radio serial number will also be printed on this sticker. A rendering of what it will look like is on the left.
  • You can also take it to your neighborhood Honda dealer, who will be able to take care of it for you, to recover the radio code.
  • You may also look it up online using the link below if you can’t go to a Honda dealer.

How can I locate my car radio’s four-digit code?

People frequently ask drivers for their car radio codes. There is still a strong probability that the code can be located while still in the driver’s seat, even if you purchased an older used automobile.

First, try these locations:

  • former owner You might try contacting the prior owner if you purchased the car used. Check to see if they wrote down the code or saved an original copy.
  • Dealership
  • The solution might be kept by an authorized dealer. To establish that you are the vehicle’s owner, you’ll generally need to have your logbook or V5C paperwork on hand.
  • site for the manufacturer
  • You may find additional details on how to get the code on the manufacturer’s website. For assistance, you might be sent to a licensed dealer.
  • Glovebox
  • On a label in the glove compartment, there are some radio codes.
  • vehicle manual
  • The code may be located under the sections on security or the stereo in your car’s owner’s manual. Alternatively, some codes can be located inside the manual on a small piece of paper or a plastic card.

Why does the radio in my car want a code?

A brief string of numbers known as a car radio code is connected to a security feature found in some head units. By rendering a stolen head unit useless when it is unplugged from the battery, it serves as a deterrent to theft. However, if your battery dies, this feature also activates.

How do I fix the radio code on my Honda Accord?

Disconnect the black negative under-hood battery cable for one to three minutes to reset the system if the radio displays an error (ERR) message. RESTART THE RADIO AND LISTEN FOR THE WORD “CODE.” THE 5 DIGIT RADIO CODE MUST BE ENTERED. TURN OFF THE RADIO AGAIN.

Check Your Ownership Booklet

A card, an owner’s manual, and a maintenance manual were all included in a booklet if you purchased your Honda brand-new. Your Honda radio code is printed on the card. “Anti Theft Identification Card,” it states. Additionally, it is printed with the serial number of your radio. The NAVI code and serial number are present if your Honda supports navigation as well.

Look In and Around the Glove Box

Before you acquired ownership of your automobile, the dealership may have affixed a label with the radio code in the glove box. A five-digit number on a little white label is what you’re looking for. It could be positioned on the side or inside the glove box, only being visible when the glove box is opened.

Find the Radio Code Online

If your car or materials don’t have the Honda radio code, you can look it out online. The VIN number of your automobile and the serial number of your radio are the two things you’ll need. Both are required.

Go to the webpage for Honda Radio-NAVICode. Enter the radio serial number, your name, your VIN, and whether your car has two devices (meaning NAVI or not). You’ll receive the Honda radio code after clicking SUBMIT.

Enter the Radio Code

The radio code is quite easy to enter. The radio preset buttons are all connected to the five digits. A “C” appears when you dial the first number in the radio code. For the remaining numbers, repeat the process. O, D, then E will be called, and the radio will start playing on the last number.

How can I obtain the radio code for my Honda before removing the battery?

The body of your radio unit bears the serial number of your radio. You must take the radio out of the dash to get to it. If you’re unclear of how to remove the radio correctly, check your owner’s manual or take your car to a mechanic. Damage to the radio and dashboard may result from improper radio removal.

You can get your radio code in one of three ways after you have your radio serial number:

To Access Your Honda Radio Code via Phone

Dial 1-800-999-1009 to reach Honda America Client Services. Your VIN number, radio serial number, and ownership documentation will need to be provided.