The bolt pattern on the 2007 Honda Civic SI Sedan is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.
You should measure from the center of one lug to the outer edge of the lug farthest from it in order to obtain an accurate measurement of your five lug bolt pattern without the use of a bolt pattern tool.
In This Article...
What is the Honda Accord’s bolt pattern for 2007?
The bolt pattern on the 2007 Honda Accord Sedan EX V6 is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.
How can I tell which wheels fit my car?
The two simplest methods are to look at your car’s sticker plate, which should be inside the driver-side door, or to search online for the precise make and model of your car’s characteristics. You can get the typical rim size from there.
What automobiles have a 5×114-3 bolt pattern?
Honda Civic or Mazda Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3 are the most popular vehicles with PCD 5×114,3.
Are there variations in Honda lug patterns?
Knowing the correct lug pattern for your car is crucial if you want to treat your ride to a new set of rims because lug patterns differ significantly between Honda models.
Whether you drive a compact Honda Civic or a roomy Honda Odyssey, you might wish to upgrade or replace your current wheels. The size of your wheels or rims will depend on your car’s lug pattern, so getting the numbers correct is essential to finding the optimum fit.
Fit of 5×100 with 5×114 3?
As shown in the image, 5×114.3 would imply 5 lugs (or holes), and the circle’s diameter would be 114.3 mm. A 5×100 would contain 5 holes as well, but because of the circle’s 14.3 mm lower diameter, the two are incompatible.
Some wheels have 10 holes and are classified as 5×100/5×114.3. The first set of five is 5×100, while the second is 5×114.3. By making one wheel suitable for numerous more cars, this helps the wheel manufacturer save money.
A 205 55R16 tire is what size?
205/55R16 tires have a section width of 8.1 inches, a height of 24.9 inches, and a diameter of 16. The circumference is 78.1 inches, or 811 miles per rotation. They can typically be installed on wheels with a rim width of 16 x 5.5 to 7.5.
What is the Honda Civic’s bolt pattern for 2009?
The bolt pattern of the 2009 Honda Civic Sedan LX-S is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.
What is the 2005 Honda Civic’s lug pattern?
The bolt pattern of the 2005 Honda Civic EX Coupe is 4-100 mm. This indicates that there are 4 lugs and that the circumference of the circle formed by the lugs is 100 mm (3.94 inches).
What is the 2003 Honda Civic’s bolt pattern?
Depending on the year, model, and trim level, the majority of Honda Civics come standard with a 5×114. 3 bolt pattern with rims that range in size from 15 to 20 inches.
How many lugs does a 2000 Honda Civic have?
Depending on the year, model, and trim level, the majority of Honda Civics come standard with a 5×114. 3 bolt pattern with rims that range in size from 15 to 20 inches. Not only are these some of the most common wheel dimensions, but the 5×114. 3 bolt pattern and lug pattern may be the most common ones as well.
Do larger tires use more fuel?
For instance, because larger tires are heavier, they reduce fuel efficiency whereas smaller tires improve it. Additionally, larger tires take more resistance and work to roll than smaller tires since they have a higher rolling resistance.
Do all automobiles fit on five-lug universal rims?
The answer is no, a universal wheel does not exist. What wheels can go on your car depends on a variety of things.
Width and Diameter The wheel’s diameter and width are two of the most important variables. Every car will have a variety of wheel diameter sizes that will snugly and properly fit, ranging in size from several inches. Typically, this happens as a result of automobiles having multiple sizes and wheel selections for each trim level (i.e. base modelpremium luxury model). This gives the consumer the choice to select wheels based on their aesthetics and functionality.
Both the diameter and width of the wheel are expressed in inches. The rim width is the distance between the edges of one bead seat and the other bead seat, whereas the wheel diameter is the height of the wheel across the center.
Offset The offset of a wheel is the separation between its centerline and its mounting surface. It is expressed in millimeters and can either be positive or negative depending on how far the mounting surface is from the center line. When the mounting surface is in front of the wheel centerline, the offset is positive; when it is behind the wheel centerline, the offset is negative.
This is crucial since you have to stay inside your car’s specified offset range. The wheel may not provide enough space for the wheel hub and brakes to operate properly if the alteration is too radical. The turning radius of your car may be affected by an incorrectly offset wheel, and the wheel may rub against the wheel well.
The diameter of the circle that goes through the center of all the studs, wheel bolts, or wheel rim holes is known as the Pitch Circle Diameter (PCD). You won’t be able to put the wheels on your car without additional parts or a new wheel hub if the PCD of the wheel you want to buy does not match the PCD of your wheel hub.
Two Drilled Wheels Dual-drilled wheels are not universal, despite what some people may believe. Don’t be duped by salespeople or marketing; a ten-lug wheel won’t fit any car with five lugs. Dual drilled wheels are those with two PCDs or bolt patterns.
For instance, a dual-drilled wheel with the bolt patterns 5115 and 5120 will only fit on cars with those specific bolt patterns. Other bolt patterns will not accommodate these wheels.
Q: What rims are interchangeable between different cars?
Fortunately, any car has a replaceable rim available. All you need to do is make sure the new wheel’s bolt patterns, size, and offset match those on the old one.
By looking at the sticker label on the inside of the driver’s door or measuring the rim, you may determine the new wheel’s proper size. Take your car to a mechanic if you are not the do-it-yourself kind.
Q: What cars use a 5114 3 bolt pattern?
A wheel hub with 114, 3 and 5 bolts or nuts is all that a 5114 3 bolt pattern is. 5114,3 bolt designs are used by various car manufacturers and models.