Have the person stay there while you restart the engine. By doing so, the system will be able to identify the user and turn on the passenger air bag. If the ” …
In This Article...
Light for Passenger Airbag
230 HEV NX4 Tucson: The manual states that the passenger airbag ON light (overhead cluster) should turn off after around 4 seconds. Indicators for ON and OFF will alternate when the passenger airbag switch is activated. Dash cluster displays no additional alerts.
Can other 230 HEV NX4 owners tell me if the passenger airbag ON light disappears after about 4 seconds?
The airbag on/off wording on the overhead console of my car never turns off. The red warning sign will remain illuminated if there is something on a seat, but it should go out if you fasten the rear seatbelts. The overhead console warnings are for the back seats. When light weights are placed on the back seats, they become exceedingly sensitive.
If a seat belt isn’t fastened and someone is sitting in it, you should see seat belt warnings on the digital dash for the front seats.
I appreciate you informing me about your Passenger Airbag ON light. It appears that Hyundai modified their behavior but left the handbook same. The passenger seat is empty, and none of the seat belt warning lights are on.
I apologize for not reading your post carefully. I responded to your question concerning airbags by talking about seat belts.
A photo of my console is seen here. I can always read the text on the RHS, which tells me if the front passenger air bag is turned on or off. The warning went to OFF after I deactivated the front passenger air bag.
When a back seat is occupied but the seat belt is not fastened, the three red warning lights to its left illuminate. Because the technology is so sensitive, it detects my very light polystyrene booster seat in the back.
Thank you; from what you and others have said, the fact that “RHS Passenger Airbag On” remains illuminated appears to be intentional rather than a defect. Hyundai should update the Tucson NX4 manual, but at least I know I don’t have to bother my neighborhood dealer.
A 2020 Tucson is mine. I must immobilize the passenger.
A 2020 Tucson is mine. I must take the passenger airbag out of service. How can I go about this?
Mechanic’s Helper: You can learn how to accomplish that from the Hyundai mechanic. Do you have any further information regarding the car that would be useful?
Mechanic’s Helper: Before I connect you, is there anything else the Hyundai mechanic needs to know? You can be confident that they will be able to assist you.
We appreciate you taking the time to let us assist you with this issue, and we hope to resolve it shortly.
Please keep in mind that since I don’t know your knowledge or skills, I might need to ask you some questions to get some fundamental information that will help me solve your particular problem.
Sometimes I might have to look for information regarding your issue before I can react, so please be patient. I’m grateful for your patience and will get back to you as soon as I can.
If the passenger airbag does not detect a person occupying the front passenger seat, it will automatically deactivate. The passenger airbag will activate if a passenger is seated in the front seat. The airbags cannot be manually activated or deactivated.
If a fuse is pulled, the entire system is shut down, meaning that none of the airbags will deploy in the case of an accident that calls for their deployment.
I want to help you and provide the best service I can. Do not hesitate to contact me if you have any queries or worries. If I’m not available at the moment, I’ll reply as soon as possible when I am.
How can I activate the passenger airbag?
When the passenger door is open, you may access the switch for the passenger airbag on the passenger side of the instrument panel. Verify that the switch is set to the appropriate position. All front-facing passengers (adults and children) are permitted to occupy the passenger seat securely when the airbag is turned ON.
How do I restart my airbags?
When an adult-sized individual is spotted in the passenger seat, the front passenger air bags will immediately deploy. The illuminated word ON on the PASSENGER AIR BAG control on the center console will indicate this. Even with an adult-sized person seated in the passenger seat, the air bag may not deploy. The word OFF will appear on the control in this situation. Do not operate the car if the air bag control cannot detect the person in the passenger seat. Do the following instead:
Once the air bag control has signaled ON after starting the car, keep the passenger and their seat in place for one minute. The air bag will remain on for one minute after which the passenger may modify their seat and seating posture.
The informative nature of the aforementioned claims warrants independent verification. kindly visit our
How is an airbag in an automobile checked?
Start the car by turning the ignition key to the “start” position. Pay attention to the airbag warning light. Normal operation is when the light flashes briefly and then turns off. The airbag system is malfunctioning if the light stays on or flashes.
My passenger airbag light is not on; why?
The mechanism may automatically switch off if the bag is heavy enough to activate it but not safe enough for the airbag to deploy. There may be a problem with the system if an adult is seated in the front seat with the passenger airbag light remaining lit up “OFF.”
How many airbags are there in the Hyundai Tucson?
Seven airbags, some of which have rollover sensors, are also included, and a frame-integrated energy-absorbing steering column is also present.
How should the passenger airbag light be set?
Only when there is an issue with the airbag system in the car should the airbag warning light remain illuminated. The car’s computer runs a system check each time you turn the key. To demonstrate that it is functioning, the light briefly illuminates before turning off.
How can I turn off the airbag light?
When you experience the same problem, you should start by following this technique, which is identical to resetting the airbag light on a Toyota Camry. It needs timing the airbag light and has four straightforward stages that are simple to complete.
First, activate the ignition. Wait for the airbag light to turn on next; it typically illuminates for seven seconds before automatically turning off. After waiting three seconds, immediately flip the ignition switch off. Before starting the engine, go through the basic procedures a couple of times. Your car’s airbag light should illuminate for seven seconds before turning off permanently if everything is done correctly.
The operation of the passenger airbag sensor.
Consider yourself and your family moving into a new home. Your goods fill the trunk and back seat of your car, but you still have to transport your daughter, who is seven years old. She must ride in the front passenger seat; you have no choice. Will she be secure there, though? What occurs if there is a collision? How will she be affected by the airbags?
Although it’s never a good idea, drivers are occasionally compelled to do otherwise by circumstances. You should be fine if you drive an American car or truck built after 2006 because they all have some form of airbag suppression, most likely an OCS.
Let’s look at a well-known OCS produced by Delphi. A pressure sensor, a silicone-filled “bladder,” and an electronic control panel are all housed inside the seat. The pressure sensor alerts the ECU to the occupant’s weight when someone sits on the seat. The airbag, which has its own control unit, receives the data from the ECU after that. The computer in the car uses that data to decide whether to activate or deactivate the passenger airbag.
Not only does the OCS measure weight. It assesses whether a passenger is wearing a seat belt by reading their position in the vehicle. Additionally, the OCS can interpret the pressure generated when a kid seat is installed thanks to a seat belt tension sensor on the vehicle. In other words, the system is made to distinguish between carrying a heavy thing there or using a child safety seat to occupy that seat. The passenger airbag status is shown to the driver by a light or symbol on the instrument panel.
The car’s two stage airbags activate once the onboard computer determines the passenger’s size and weight. These airbags can inflate fully, partially, or not at all depending on the size of the people. A child or tiny adult who is hit by an airbag at full speed could suffer serious injuries or perhaps die. In addition, when the car is in a small collision, twin stage airbags can also activate at lower speeds.
Although weight sensors are already the most used method of occupant detection, automakers are testing brand-new technologies that may be even more efficient. Some experimental systems use optical pictures of the occupants to distinguish between children and adults, and they use that knowledge to switch the airbags on or off appropriately. Others even go as far as using sitting passengers’ heartbeats and respiration to detect physiological parameters and instruct the airbags [source: Delphi]. Keep in mind that it is always safer to keep young children in the back seat, even in vehicles with an OCS.
We’ll examine the background of airbag sensor systems and the initial justification for their use in the next section.
How many airbags are there in the Tucson?
While the 2021 Hyundai Tucson has a number of driver-attention safety systems, there are several additional non-driver oriented features that are more passive until they are required to be employed, such as: seven airbags System LATCH. surround-view display
How much weight triggers the passenger airbag?
airbag off indicator for passengers This happens when an infant or young child, weighing no more than 65 lbs (29 kg), is detected on the front passenger’s seat by the weight sensors. Small children and infants should always be properly restrained in the back seat.
Why is the flashing airbag light on?
A light on your instrument cluster turning on, or worse, continuing to blink, is one of the most annoying things that may happen. Please allow me to explain what you can do to disable the airbag light if you are having this issue personally.
It’s crucial to first understand why your car’s airbag light initially illuminated. There are several causes. It can indicate that your battery backup is dead, that your airbag clock spring is broken, or that the SRS airbag control module is malfunctioning. It might potentially indicate a problem with your impact sensors or seat belts. Whatever the cause of the airbag light may be, the major concern you should have is that unless the problem is resolved, your airbags won’t deploy in subsequent collisions. This implies that every time you get in your car to drive, you put yourself at risk for harm or perhaps death.