Usually found somewhere under the steering wheel, the reset button for the tire pressure monitoring system. Till the tire pressure monitor system light blinks three times, keep the reset button depressed. The sensors should reset about 20 minutes after you restart the vehicle.
In This Article...
How To Reset The Tire Pressure Sensor On The Hyundai Sonata For Models From 2007 to 2018
Driving the vehicle for at least 10 minutes at a speed of 50 mph or higher is the simplest way to reset the tire pressure sensor on every Hyundai Sonata vehicle.
You must manually reset the tire pressure light if it remains on after 10 minutes of driving. From 2007 to 2018, all Hyundai Sonata models can be repaired using the following procedure.
Locate the TPMS reset button in step two (usually underneath or to the side of the steering wheel).
Step 3: Hold down the tire pressure monitoring reset button while waiting for three consecutive flashes of the tire pressure warning light.
Step 5: To fully reset the sensor, start the vehicle and let it run for 20 minutes.
Step 6: The tire pressure light ought to go out after the TPMS sensor has been manually reset.
How to re-set the tire pressure on a Hyundai Sonata
Once the TPMS light has flashed three times, let go of the tire pressure monitor reset button. Start the engine and give the sensor 20 minutes to refresh. Under the steering wheel is typically where you’ll find the TPMS reset button. Consult your owner’s handbook if you are unable to locate it.
How to reset the tire pressure light on a Hyundai Sonata 2020 is another common query. When the tire pressure light blinks three times, release pressure on the TPMS reset button. Start the car and let it run for 20 minutes to let the sensor reset. Under the steering wheel is typically where you’ll find the TPMS reset button. Consult the owner’s manual for your car if you can’t find it.
How to reset the tire pressure light on a Hyundai is another common question. Release the TPMS reset button after holding it down while waiting for the light to blink three times. To reset the sensor, start the engine and let it run for 20 minutes. The reset button for the tire pressure monitor is often located underneath the steering wheel.
A 2018 Hyundai Sonata’s tire pressure light needs to be reset, too. Hold down the tpms reset button on the 2018 Hyundai Sonata until the tire pressure light blinks, then start the car and wait for around 20 minutes.
Furthermore, where is the 2017 Hyundai Sonata’s TPMS reset button? Make sure the tire pressure is right before starting the 2017 Hyundai Sonata to reset the TPMs. After 10 minutes, press the reset button, which is located to the right of the steering wheel. You might need to keep pressing the button until the light flashes in some circumstances. A button with the label “tpms” or something similar is located to the right of the steering wheel. When it starts to blink, hit it and keep it down. Once it blinks, let the car sit for roughly 20 minutes so that it can readjust.
How can I turn off the tire pressure warning light?
When the tire pressure light blinks three times, release pressure on the TPMS reset button. Start the car and let it run for 20 minutes to let the sensor reset. Under the steering wheel is normally where you’ll find the reset button for the tire pressure monitor. If you can’t find it, consult the owner’s manual for your vehicle.
Why, after filling the tires, does my tire pressure light remain on in a Hyundai?
If you’ve inflated your tires, but the air pressure warning light continues to flash, your tire pressure monitoring system is malfunctioning or you have a gradual leak. A bright TPMS warning light indicates a problem with a tire pressure sensor, assuming there isn’t a leak in your tire. One of them might be damaged, the lithium-ion battery might be dead, or the TPMS itself might have an internal problem. You’ll need to get your Tire Pressure Monitoring System repaired in any of these scenarios.
Quick Tip: Recheck the tire to ensure it is inflated to the correct air pressure if the TPMS warning light illuminates again after you have inflated it. Low tire pressure indicates an air leak, which requires repair or tire replacement.
Why won’t my tire pressure warning light turn on?
Try the following if your TPMS light is still on after you have inflated your tires to the recommended pressure: 10 minutes at a speed of 50 mph would be plenty. When you start the car again, the TPMS light should not be on because the tire sensors should have been reset.
My tire pressure is fine, so why won’t the light go off?
When the TPMS warning light illuminates, proceed with caution. This indicates that at least one of your tires may be at least 25% under-inflated.
*The simplest way to get the most accurate reading is to check the tire pressure before you drive on it when the tire is “cool.” If your TPMS light is on, first check that you have correctly reset your TPMS by following these instructions.
Will my TPMS light automatically turn off if I fill my tires with air after it illuminates?
Several minutes after reinflating the tires to the prescribed pressure, the TPMS light ought to go out.
What happens if I adjust the tire pressure but the light on my tire pressure gauge still doesn’t go out?
The only place that can fix a computer issue that causes the TPMS warning light to turn ON and flash ON for one second and OFF for three seconds is the dealership service center. When the TPMS warning light illuminates and remains on, one or more tires may have low tire pressure. The light ought to go out once the tire is inflated to the recommended tire pressure listed on the door placard. Always check the pressure in all of your tires because one or more of them may not be at the proper pressure.
Can the tire pressure monitoring system be turned off?
Yes, it is possible to disable your tire pressure monitoring device using a smart, non-intrusive approach. You only need to use an emulator created to get around the TPMS. The TPMS bypass emulator is a tiny box-shaped gadget containing technology that allows you to “switch off” your tire pressure monitoring system.
Will the tire pressure light automatically turn off?
Tire pressure can be impacted by overnight temperature variations or by cold winter days. The low-pressure indicator may then display as a result of this. The pressure in your tires can change by up to 10 PSI when there are significant temperature changes between day and night.
After about 20 minutes of driving, the light may turn off on its own when the right inflation level stabilizes and the air in your tires warms and expands.
In any case, you ought to have your air checked immediately. Your tires are at least 25% underinflated, according to the TPMS light. This poses a risk to your safety, especially if the load is close to your vehicle’s maximum load capacity. There is a higher possibility of tire failure, degraded handling, and increased tire wear and tear. Your fuel economy may also suffer.
My tires are in good condition, so why is my low tire pressure sign on?
defective TPMS sensor Additionally, these sensors are powered by onboard batteries, which have an approximate lifespan of 5 to 7 years (up to 10 years in the best cases). The TPMS sensor may malfunction and illuminate the low tire pressure signal even when the tires are in good condition due to low battery power and aging-related wear and tear.
What does the Hyundai Sonata’s TPMS light mean?
Your Hyundai Sonata’s tire pressure monitoring light turning on indicates that one or more tires are either under- or over-inflated. To keep you safe while driving on the road and to prevent any damage to your tires, car tires must be filled to a specified PSI.
A Hyundai Sonata should have a PSI of 34. The tire pressure light on your car’s dashboard will turn on if the tire pressure monitoring system determines that the tire pressure is either too high or too low. The tire pressure sensor needs to be reset after your tires have been inflated to the recommended PSI.
If you don’t know how to reset the tire pressure sensor on a Hyundai Sonata, this page contains all the instructions you require. For detailed instructions on how to reset the TPMS on every Hyundai Sonata model from 2007 through 2020, keep reading.
What does the 2009 Hyundai Sonata’s TPMS light mean?
Check the air pressure in each tire and make any necessary adjustments when the low tire pressure warning light illuminates. Repair the tire as necessary if it has been damaged. Make sure the alarm light is turned off. There is a TPMS issue if the warning light is still on.
How soon after tire filling will the light turn on?
Within twenty minutes, the light ought to turn off. While the car is off, disconnect the positive battery cable. To release the last of the power, turn on the engine and press the horn for three seconds.
How long should the tire light be on when driving?
Low tire pressure makes the situation worse because it is more difficult to gain traction and roll ahead. Under these circumstances, avoid driving with low tire pressure for more than 40 miles or more than 30 minutes.
Driving with having a faulty tire pressure sensor is it safe?
No, it is not safe to drive with the TPMS Light on. It indicates that one of your tires is either under- or over-inflated. The recommended tire pressure for your vehicle can be found in the owner’s manual or on a sticker on the door, trunk, or fuel door. This may result in excessive tire wear, perhaps result in tire failure, and result in a blowout that is hazardous to you and other motorists on the road. For detailed instructions on how to check your TPMS system, make sure to consult your owner’s manual. Different manufacturers may have altered how their TPMS lights activate.
What distinguishes TPMS from low tire pressure?
A tire pressure monitoring system (TPMS) is built into your car and is intended to monitor the air pressure in each tire. The Low Tire Pressure indicator on your dash goes on automatically when the system detects a low tire (it looks like a tire with an exclamation point in it). Until the tires are checked and the pressure is adjusted, this light will remain on.
On the other hand, the TPMS light is intended to turn on when there is an issue with the monitoring system itself. For instance, if a sensor in a wheel malfunctions, the TPMS light will illuminate and remain on until the issue has been resolved.
The maintenance process is not replaced by the TPMS system. Even if the indicator is not on, you should physically check your tire pressure at least once every month.
The informative nature of the aforementioned claims warrants independent verification. kindly visit our
Do tires need more than 35 psi?
You might have spotted the words “Max. Press. 35 PSI” somewhere on the sidewall of your tire, just below the large, strong lettering of the manufacturer, for instance (pounds per square inch).
You may determine the maximum cold pressure required for your tire to bear its maximum weight using that value.
According to Rod Tate, owner of Stafford, Texas’ highly regarded Colony One Auto Center, most average tires need between 32 and 35 pounds per square inch (PSI) of air.
Large vehicles need tires that are substantially larger, between 50 and 60 PSI. Heavy-duty automobiles can ascend much more. As an illustration, the tire in the image below needs 41 pounds per square inch of air.
However, since almost all vehicle manufacturers recommend lower tire inflation pressures than the tires’ maximum pressure, the maximum pressure of the tire may not always be the best pressure for every vehicle on which it can be used.
Instead of using the maximum pressure, you should should stick to the recommended pressure that is printed either within your automobile or in the manual. I’ll explain why in the part that follows.