Your SRS, or Secondary Restraint System, is a crucial safety element because it’s made to control the airbags. Have a mechanic inspect your car and ask them if there are any recalls on it to make sure there are no current problems before you reset the SRS light yourself.
Here’s how to turn off the SRS light on a 2002 Honda Accord if you’ve made sure there aren’t any other issues:
- Fuse box is located underneath the steering wheel. To access the fuse box, remove the panel.
- After removing the panel, several wires and connectors ought to be visible. Find the Memory Erase Signal (MES) connector, which is often a two-hole hold plug in green or yellow. Take out the plug.
- Untwist a metal paper clip to create a U shape. Fill the two-hole plug with the paper clip. This will cause the MES connector to short circuit.
- Put your car keys in the ignition to start the engine while keeping the paper clip in the two-hole plug. Never start the vehicle. The SRS light will flash briefly before going out. The two-hole plug and paper clip should be unplugged.
- The SRS light will turn on once more after the paper clip is taken out. To turn off the SRS light, re-insert the paper clip into the two-hole plug. Take remove the paper clip after turning off the light.
The SRS light will blink twice, indicating that the SRS system and light have been successfully reset. However, if your light returns after the system has been reset, you should get in touch with a professional right once.
Consider reviewing your auto policy to ensure you are paying the lowest prices possible for your coverage while you are taking the time to fix your SRS light. Jerry is a free insurance comparison software that checks around for the best deals with more than 50 different insurance providers. You may make adjustments at any time, receive prices instantly, and text an agent with any queries you may have.
In This Article...
What does the Honda Accord’s SRS light mean?
In my shop, I had to deal with this only last week. The supplemental restraint system’s SRS light serves as a warning light (airbags). A system issue is indicated by the presence of an SRS light. The fuse for the SRS unit is the first item I would check. This can only be verified with some form of scan instrument. A Solus Pro was mine. The first portion of the numerical error code is displayed by the scanner’s slow flash, and the second portion is displayed by the scanner’s quick flash. You should examine the code and go from there, in my opinion. It will probably display a “non-functional” code; this is a regular issue. In the 2000 Accord EX that I worked on last week, I had to completely replace the SRS unit.
What would activate the SRS light?
Your car’s internal computer has disabled the airbags if the SRS (Supplemental Restraint System) indicator remains illuminated. This indicates that there is a problem with the airbags. Although your airbags won’t deploy at random, they might not in the event of an accident, therefore it’s crucial to locate the issue and have it fixed by a qualified repair.
Your car’s SRS light will come on for around 6-7 seconds when you turn the key, then go out if it detects no abnormalities. You may have an issue with the airbags itself, a loose wire, a broken seat belt buckle, or an issue with the Engine Control Unit (ECU) if the SRS light remains on or starts flashing intermittently. To get you back on the road safely, our mechanics at My Auto Solutions in Buford, Georgia, provide airbag module reset, removal, and installation services.
Drive while the SRS light is on?
One should not ignore the airbag light or the SRS warning when they appear. It doesn’t necessary imply that the vehicle is unsafe to operate, but doing so is risky and akin to playing with fire. When this light is on, it indicates that your safety system isn’t functioning properly and, in some situations, that your airbags aren’t functional and won’t deploy in a collision.
Can I drive safely with my SRS light on? The answer is negative, as there is a significant risk if an accident were to occur, even if it is possible that the airbags may still deploy with the light on. We advise having a specialist examine it and identify the problem so that it may be corrected right away.
How do I turn off my SRS light?
When you experience the same problem, you should start by following this technique, which is identical to resetting the airbag light on a Toyota Camry. It needs timing the airbag light and has four straightforward stages that are simple to complete.
First, activate the ignition. Wait for the airbag light to turn on next; it typically illuminates for seven seconds before turning off automatically. After waiting three seconds, immediately flip the ignition switch off. Before starting the engine, go through the basic procedures a couple of times. Your car’s airbag light should illuminate for seven seconds before turning off permanently if everything is done correctly.
What does it cost to repair the airbag light?
The type of defect that needs to be fixed will determine how much it will cost. You might shell out between $1,100 and $1,500 to repair the airbag in the steering wheel, mostly for the labor. But if you can fix the clock spring yourself, it should only cost $250 to $350 to replace it.
Between $350 and $450 is the typical cost to repair an airbag sensor, with the parts typically costing approximately $300. If you don’t have a sophisticated code scanner, it’s advisable to have a mechanic handle the repair because the codes will need to be reset.
How much does servicing an airbag cost?
The cost of replacing an airbag can be significantly more than the airbag itself. They take a long time to replace, and the cost of replacing all the linked parts adds up quickly.
Expect to pay, on average, between $1,000 and $1,500 for each replacement airbag. Just the airbags themselves are included; other parts that require replacement are not. A replacement airbag module will cost an additional $600 and above.
Therefore, if your driver’s and passenger’s front airbags have deployed as a result of a frontal collision, you should budget about $3,000 to repair your airbag system. Getting your car roadworthy goes above and beyond bodywork! Is it cheaper to sell your car instead of paying these expenditures to fix it?
Of course, the overall cost of repair for replacing your airbags and/or your instrument panel may vary based on the year, make, and model of your car. As an illustration, the cost to repair the driver-side airbags on a Ford F150 ranges from $200 to $700. The cost of replacing the side passenger airbags in a Honda Civic ranges from $400 to $1,000. Depending on the manufacturer, cars like BMW, Nissan Altima, Toyota Camry, and others may be expensive or affordable.
Can the airbag light be reset without a tool?
Without a scanner, most automobile models make it difficult to reset the airbag light. This is a safety warning since, when the airbag light appeared, you should always fix the problem. Fortunately, if you fix the issue, the airbag light will typically also turn off by itself in many automobile models.
However, in some older vehicles, the airbag light can be reset without a scanner by disconnecting the battery wires.
Make that there are no loose wires or rust in the connector plugs in the wiring system under the driver’s or passenger’s seat. Restart your car after spraying an electronic cleaner on the connecting plugs.
If you can’t detect any issues there, you should really invest in an OBD2 scanner or have a shop interpret the codes because otherwise you’ll have to guess what the issue is.
What does it imply if the airbag light is on indefinitely?
A problem with the seatbelts or airbags is indicated by the airbag light. Therefore, it’s usually not a good idea to drive when the airbag light is on. We advise having it towed to the dealership rather than driving it yourself if it continues to flash inside your car.
How much does a Honda Civic SRS light repair cost?
Cost estimation for the replacement of the occupant sensor in a Honda Civic. A replacement air bag occupant sensor for a Honda Civic costs, on average, between $974 and $999. While parts are priced at $878, labor costs are predicted to range between $96 and $121.
What does the internal SRS unit failure mean?
If the SRS unit displays the code 5-1 Internal Failure, the car has been in an accident, and the ACM airbag control module has crash information recorded in it. Any diagnostic scan tool won’t be able to clean or remove this code. The message “cannot run routine” will appear.
How can a Honda’s SRS code be read?
Follow these steps to read the SRS codes on your Honda:
- Step 2: To make a U shape, untwist a paper clip.
- The first step is to unlock your automobile and unlock the driver’s side door. The ODBII port is situated between the dashboard and the steering wheel. To locate this port, you might have to stoop down.
- Step 3: Connect the paper clip to ports 4 and 9 of the ODBII.
- Step 4: Insert your automobile key into the ignition, but do not start the car (just put it in accessory mode). The SRS light should start flashing.
The main code and subcode are the two components of an SRS code. Count the flashes to determine the main code.
- These will be single flashes for values ranging from 1 to 10.
- For values 11 through 15, adding extra flashes together makes the value of 10 equal to every four quick flashes. For instance, two single flashes followed by one set of four continuous blinks equals twelve.
- You’ll witness two sets of four continuous flashes for values of 20 and above, which equals 20, and then add further flashes together. Two sets of four continuous flashes followed by one single flash, for instance, equals 21.
Count the number of blinks you observe to decode the subcode. This equals 5 if there are 5 single blinks. DTC 21-1 is represented by the code when the main code is 21, and the subcode is 1.
To analyze the problem with your car, see the SRS code chart, which defines each code in detail. Searching Google will bring up this graph.
You obviously care about your car because you are taking the time to understand SRS codes. Therefore, spend some time reviewing your auto coverage to be sure it still satisfies your needs today and that you aren’t paying too much for it.
In less than a minute, the Jerry app will produce comparative quotations from leading suppliers. Jerry collects your data from your former insurance, so you won’t have to fill out any time-consuming forms or make any unnecessary phone calls. The typical user of Jerry saves $879 annually on auto insurance.