Reconnect the battery, being careful not to tighten the bolt when you do so. Check to see if the check engine light is now off by starting your automobile. If the light stays on or comes back on at any stage, the automobile still has a problem that needs to be looked at by a qualified mechanic.
- Do not let anything metallic touch the battery’s two posts at the same time. By doing so, you run the danger of receiving an electrical shock and damaging the battery.
In This Article...
SERPRESULT
If the problem or code that caused your Hyundai Tucson’s check engine light to come on is resolved, it will typically turn off by itself.
If the problem or code that caused your Hyundai Tucson’s check engine light to come on is fixed, it will typically turn off by itself.
How can I turn a Hyundai Tucson’s Check Engine light back off?
Remove the bolt while leaving the negative terminal attached with a 1/4 or 3/8 ratchet, then totally detach it. For at least five minutes, let the battery sit unplugged. Reconnect the battery, being careful not to tighten the bolt when you do so. Check to see if the check engine light is now off by starting your automobile.
When the CEL starts blinking after waiting seven seconds, fully depress the accelerator and hold it there for roughly 10 seconds. Allow 10 seconds to pass. Press the accelerator pedal all the way down and hold it there for at least 10 seconds.
Sometimes, even after you’ve solved the issue with your car, the check engine light will remain on. You’ll have to manually reset the light if that happens. One choice is to repeatedly switch the ignition on and off three times. Drive your car around a bit after that to see whether the light turns off.
three times, turn the car on and off
Following three consecutive turns on and off, some vehicles will automatically reset the fault codes that led to the initial error. Put your key in the ignition, start the car for about a second, and then switch it off for about a second to do this. Then drive the car normally after doing this two more times. Verify if the check engine light has been reset.
On a 2019 Hyundai Tucson, how do you turn off the check engine light?
If the problem or code that caused your 2019 Hyundai Tucson’s check engine light to come on is resolved, it will often turn off by itself. For instance, if a loose gas cap was the reason your check engine light illuminated, it will turn off once the cap is tightened.
Why is the Hyundai Tucson’s check engine light on?
Your 2021 Hyundai Tucson’s check engine light will begin flashing if there is an urgent need for repair, so you should bring your Hyundai in right away. The typical indication of this blinking light is a serious engine misfire that allows unburned fuel to leak into the exhaust system.
Why is the 2017 Hyundai Tucson’s check engine light on?
If your 2017 Hyundai Tucson’s check engine light begins to blink, the issue requires immediate care, and your Hyundai needs to be taken in right away. This stark light frequently denotes a terrible engine misfire that causes unburned fuel to spew into the exhaust system.
Can you turn off the check engine light manually?
You might have requested for assistance with a computer problem if you’ve ever worked in an office setting with an IT department.
Probably the first thing your IT wizard asked was, “Have you tried resetting your computer?”
The analogous repair for a car’s check engine light is the on-off technique. It compels the computer to reboot and restore its previously saved state.
Simply switch the ignition on for 1-2 seconds, then off for 1-2 seconds, using your key. Three or four times through, repeat this step.
If the check engine light is still on after the reset, your car might still be having issues. Think about using the OBD2 scanner to check for the error code or taking your car to a qualified repair.
How can I extinguish the engine light?
The reasoning is fairly straightforward: If you continue to drive, the onboard computers will recheck the issue, provide an update on your car’s performance on the road, and turn off the message when it detects no faults.
You might need to take another look at the first issue yourself if you are forced to ignore the light for several days after the initial incident. Either the error is still present or other parts of your engine are still experiencing the issue.
Why is the check engine light on on my Hyundai?
What Sets Off the Check Engine Light on a Hyundai? In general, the Hyundai check engine light acts as a “catch-all” to inform you when your car needs maintenance. It could start as a result of a serious problem or just because your gas cap is unfastened.
How can a Hyundai’s check engine light be reset?
- As you drive, let the light turn off on its own. None.
- Three consecutive times of starting and stopping the engine None.
- Reconnect the battery after disconnecting it. Wrench.
- Use a code reader for the OBD
Without a scanner, how can I turn off my check engine light?
Using a Scanner to Reset a Check Engine Light. Without a scanner, unplug the negative battery cable from the engine and wait a few seconds to restart the check engine light. Your car’s diagnostic system will be reset as a result, and if the underlying problem has been fixed, the light should go off right away.
What causes the check engine light to come on?
- sensor for oxygen (or O2 sensor)
- failure of the catalytic converter
- failure of the ignition coil or spark plug.
- faulty airflow sensor
- Switch out the thermostat.
- Clean all EGR ports and replace the exhaust gas recirculation (EGR) valve.
How far must you travel to turn the check engine light off?
Most likely, the problem with your check engine light has been resolved, but it’s still on. And you’re growing annoyed by it. Maybe you spent a fortune on it.
You probably don’t know this, but you need to drive for 50 to 100 miles after clearing the car’s computer.
The computer in your car will keep track of all the sensors’ readings while you drive and record them.
Details are as follows:
After resetting the codes, your automobile hasn’t been driven for enough time. Solution: Continue driving until the system flashes READY.
But wait, there are still some very crucial items to consider. So let’s look more closely.
How long should the check engine light remain on?
It is still possible to drive your car if the Check Engine light comes on for any reason, but it is only advised to go another 50 to 100 miles before checking your car’s computer for problem codes. You can pinpoint the problem at hand using this technique and deal with it however you see proper.
Depending on the problem that caused the Check Engine light to come on, you could be able to keep driving for a very long time or only a few days. The engine computer has time to reset some sensors after traveling between 50 and 100 miles, which could resolve the issue.
Do oil changes cause the check engine light to illuminate?
Your car’s check engine light coming on is the first indication that it needs an oil change. When the oil is too dirty or not flowing sufficiently through the engine, it may turn on.
Resetting the check engine light at Autozone?
Are you curious if your neighborhood Autozone can extinguish a check engine light? The answer is “yes,” but there are a few points to keep in mind:
- Local auto parts shops frequently offer to read your codes for free, but not all of them will turn off the light because of legal concerns. Some of them aren’t even equipped with code scanners for the check engine light.
- Whether or whether it is obvious that the components will cure your check engine light, salespeople are frequently encouraged to sell you items while you are at the store (and may actually be a waste of money).
Why is my engine light on when there doesn’t seem to be a problem?
The on-board diagnostic system uses the “check engine” light to alert you of problems. However, that something might be any number of other things, great or tiny. It might turn on due to a minor issue, such as a gas cap that is loose or broken. It might also indicate a serious engine breakdown.
Why is the check engine light yellow?
Depending on the issue, if the check engine light comes on, it may flicker or be on all the time. A issue that requires immediate attention is indicated by a blinking light, or in some cars, a red light instead of a yellow or orange light. In either case, you ought to have the car looked at by a mechanic.
An engine misfire that is severe enough in late-model cars to send unburned fuel into the exhaust system, where it can quickly destroy the catalytic converter and necessitate an expensive repair, is typically indicated by a blinking light. If that occurs, you should turn down the engine and get the automobile or truck checked out as soon as you can.
Even if there is no immediate danger if the light is steady, you should make an appointment as soon as feasible. Even while your fuel mileage may be declining and your vehicle may be spewing unsafe amounts of hydrocarbons and other pollutants, you might not notice a decline in performance since modern automotive systems frequently try to adjust when there is a problem.
According to Jim Collins, a national training team leader for Ford Motor Co., “The customer is really, in the long run, potentially hurting their pocketbook by leaving that light on and ignoring it.” The car’s computer may in some severe circumstances lower power for you in an effort to lessen the likelihood of damage.
Here are some recommendations on what you should do if the check engine light illuminates:
- Search for a critical issue that need quick action. Look for any warning signs of low oil pressure or overheating on your dashboard in the gauges and lights. These circumstances call for you to stop and turn off the engine as soon as you can find a secure location to do so. On some cars, a yellow check engine light indicates troubleshoot, while a red one commands immediate stopping.
- Possibly tighten the gas cap. This frequently makes the issue go away. The light might not reset for a while, so keep that in mind. Some automobiles feature a secondary indicator that sounds when the gas cap is loose.
- Reduce the load and speed. Reduce your speed and make an effort to lessen the demands on the engine if the check engine light is on or you notice any major performance issues, including a lack of power. For instance, it would be wise to put an end to hauling a trailer. Get the car evaluated as soon as you can to avoid costly damage.
- If any built-in diagnostic tools are available, use them. Many contemporary vehicles feature built-in remote diagnostic capabilities that allow for reporting on fault codes and scheduling an appointment for service. Today, numerous automakers offer remote diagnostics and the option to book a service appointment, including Fiat Chrysler, Ford, Hyundai, Jaguar/Land Rover, and Volvo.
Driving is possible with the engine warning light on.
Generally speaking, you can keep driving to your destination unless there are more signs that something is amiss. To prevent further harm to your car, you should then have it inspected by a professional as soon as you can.
However, if you notice further problems with your car that point to an issue with the engine or if the EML is red or flashing while the engine is running, this may be a sign of a more serious issue. If this occurs, you ought to:
- As soon as it’s safe to do so, stop.
- Turn off the car’s engine.
What does a check engine light that is solid mean?
The Check Engine Light may illuminate either continuously or intermittently. They have two distinct meanings.
When the engine light flashes while it is on, there is an urgent problem. Find a secure location to stop your car, then turn it off. Perhaps you could think about having it towed to the shop. To prevent damage to your car, a specialist needs to identify the issue as soon as possible. A severe issue arises when the check engine light flashes.
Even though there may still be cause for concern if the engine light remains steady, you don’t need to panic right away. A solid Check Engine Light may signify a simple issue, such as a loose gas cap, or it may point to a more serious issue, such as a fuel, timing, or transmission problem. Although there isn’t the same urgency as if the light were flashing directly at you, have your car looked at.