- Go to Setup > Connectivity > iOS > Enable Apple CarPlay on the Hyundai infotainment system’s touchscreen.
- Utilize an Apple Lightning to USB cable to connect your Apple iPhone to your Hyundai.
- You should see a green Apple CarPlay emblem on your Hyundai’s infotainment screen.
In This Article...
Install CarPlay
- Connect your iPhone to the USB port in your car if it supports CarPlay with a USB cord. There may be a CarPlay icon or a smartphone icon on the USB port’s label. Use an Apple Lightning to USB cable exclusively.
- Connect your iPhone to the USB port in your car if your vehicle supports CarPlay both wirelessly and via USB cable. On your next drive, a notification on your iPhone will offer to link you wirelessly.
- Simply press and hold the voice command button on your steering wheel if your car only supports wireless CarPlay. Ensure that Bluetooth or wireless mode is selected on your stereo. Next, make sure Wi-Fi is turned on by going to Settings > Wi-Fi on your iPhone. Activate Auto-Join by tapping the CarPlay network and then tapping it again. Select your vehicle by going to Settings > General > CarPlay. For more details, consult your car’s owner’s manual.
It might be necessary to upgrade in order to activate Apple CarPlay and Android Auto.
Android Auto and Apple CarPlay are pre-installed in the majority of Hyundai vehicles with Display Audio or Navigation that are 2017 model year or newer. Only a small percentage of cars do not have it installed, though. You do not need this update if your car already has Apple CarPlay and Android Auto. To find out if your car qualifies for this upgrade, look at the list below.
Installing Android Auto and Carplay after downloading
There are two ways for drivers to install these devices in their cars. For starters, the Fort Mill Hyundai staff may assist with installation. Otherwise, downloading and installing the software at home is simple. All you need is an Internet-connected computer, a USB stick with at least 2GB of free space, and enough time.
You can install the program on your Hyundai vehicle after downloading it and copying it to the USB device. The engine of the car must be running during installation, which might take up to an hour. Therefore, it is advised that you park your vehicle for installation in a place that is well-ventilated and shaded.
The USB disk should be plugged into the car’s USB port. then select the SETUP button on the radio. Select the SYSTEM INFO icon by descending the touchscreen display of the car. Afterward, select the UPDATE button located at the bottom of the screen. The installation procedure will begin as a result.
How does Hyundai’s Apple CarPlay function?
Siri can be used to access a number of Apple CarPlay features. Touch and hold the home symbol to bring up Siri. You can also push the speech recognition button on the steering wheel as an alternative. You may use Siri to start calls, send texts, and start navigation while still keeping your attention on the road.
Why won’t my Hyundai’s Apple CarPlay function?
I experienced exactly the same problems as user dcwarpath. In reality, dcwarpath and I have the same model year, trim level, and package (2021 SEL with Convenience Pkg), as well as the identical iPhone XR. I constantly had to use the hard reset button since the phone frequently lost connection (to the right of the Tune knob). Although I adore the car, the frequent audio and screen cuts off were annoying.
I discovered that turning off the Wireless’s automatic request to join other wifi networks helped a little, but the issue persisted. When I later upgraded to an iPhone 12 running iOS 15.2, the issue was resolved entirely. The firmware for the Hyundai infotainment system was also not updated by me. Since I’ve had the phone for roughly three weeks, the wireless car play has never disconnected while I’m driving.
I don’t understand why it now functions with the new phone. Despite the fact that I can’t think of any reason why this would be the case, I had read that the issue might potentially arise due to inadequate cell coverage. Maybe the iPhone 12 merely received some upgrades to the BT, Wifi, or cellular radios that are now making it functional.
Check to see if CarPlay isn’t restricted if it can’t detect your iPhone. Make sure CarPlay is turned on by going to Settings > Screen Time > Content & Privacy Restrictions, tapping Allowed Apps. Navigate to Settings > General > CarPlay, choose your vehicle, and then select Forget This Car. Restart CarPlay after that.
Why is Apple CarPlay not functioning on my Hyundai Tucson?
Make sure the USB port and cable are in good working order if you plan to use CarPlay with an iPhone. The infotainment system in your car can be connected to your iPhone through the USB connector.
Additionally, you should examine the cords for damage or breakage since this can be the reason CarPlay isn’t working. To see if CarPlay functions properly at that point, you can try replacing the USB cord with another one. If it does, the USB cable is the problem. If it doesn’t, something else—possibly the USB port—might be at fault.
Does Hyundai support Apple CarPlay wirelessly?
It’s just as simple to set it up whether your Hyundai SUV or sedan supports wireless Apple CarPlayTM. While your phone is in Bluetooth(r) pairing mode, just press and hold the Voice Control button on your steering wheel.
How can I make Apple CarPlay work?
- Connect your smartphone to the USB port in your car and check for the CarPlay icon.
- After selecting “Settings,” select “General” and “CarPlay.” Select your car from the list of “Available Cars.”
How do I get my iPhone to work with Apple CarPlay?
Lightning(r) connector from your iPhone must be used to connect to the Toyota USB port. On the Toyota EntuneTM 3.0 touchscreen, select “Apple CarPlay.” To access Apple CarPlay, select Menu > General. Apple CarPlay ought to connect instantly once your phone is linked to a USB wire.
Without a USB port, how do I use CarPlay?
Do not worry if your vehicle does not support wired CarPlay or if you do not have a USB-A to Lightning connector on hand. Without a wire, you can install CarPlay by using the voice command capabilities of your vehicle.
While the wireless or Bluetooth is turned on, press and hold the voice command button on the steering wheel.
Once it has initialized, CarPlay will keep doing so each time you start your engine.
Why does my plugged-in Apple CarPlay not function?
Restarting the iPhone and the infotainment system, attempting a new USB cable, and ensuring that Siri and CarPlay are enabled will most likely help if your Apple CarPlay isn’t working.
You can significantly enhance your driving experience by using Apple Carplay. Therefore, it can be a major pain in the neck if it doesn’t work. It was aggravating to cope with when my iPhone suddenly stopped connecting to my automobile. Fortunately, I was able to solve the problem, and I will now explain how I accomplished it.
Are you experiencing the same issue with Apple CarPlay not functioning? Lucky for you, I’m here to assist you.
Does Apple CarPlay immediately connect?
Do one of the following in a car that supports wireless CarPlay (see your owner’s manual for specific instructions):
Note: If your car supports wireless CarPlay, you may be able to link it by simply connecting your iPhone with a Lightning to USB cable to the car’s USB port. If supported, you are prompted to pair wireless CarPlay for later usage after starting CarPlay via a USB cable. If you accept, iPhone will wirelessly connect to CarPlay automatically the next time you take a trip.
On some electric vehicles, use the Maps app to identify the vehicle for EV routing after connecting to CarPlay. See Maps on iPhone: Set up electric car routing.
When you connect an iPhone to specific car models, CarPlay Home automatically appears.
Select the CarPlay logo on your car’s display if CarPlay Home doesn’t show up.
Where is CarPlay located on the iPhone?
You might need to give permission on your iPhone if this is your first time syncing iPhone 12 CarPlay to your vehicle. If not, wait for Apple CarPlay to be detected by the stereo.
Alternately, you can choose your car’s name by going to “Settings > General > CarPlay > Available Cars” on your iPhone.
How can I link my iPhone via Bluetooth to my Hyundai?
When you’re out and about, Bluetooth makes it simple and safe to stay connected to the contacts, applications, and music on your mobile device. You must understand how to connect your smartphone to the multimedia system in your Hyundai before you can begin using Bluetooth.
A general, step-by-step tutorial for pairing your phone can be found below. Please visit Hyundai Bluetooth connecting instructions for instructions unique to your vehicle and device.
1. Click the Setup button, which is next to the LCD display controls.
2. Click the Bluetooth icon in the Settings Menu.
3. Choose Bluetooth Connection from the Bluetooth menu.
4. Choose Create New.
5. Ensure that your device has Bluetooth enabled.
6. Open the Bluetooth screen on your device, then choose the device name that corresponds to the one that is shown.
7. A Passkey can be needed on your phone. Put the number into your phone if asked.
8. The car will certify that the connection between your device and the vehicle was successful.
9. The car will acknowledge that it downloaded your contacts.
10. If you want to make your phone the primary device for Auto Connection, choose Yes.
Apple CarPlay – is it an app?
There are numerous methods for retrofitting CarPlay into a car, but some of them are trickier than others. The simplest option is to get a standalone display that works with CarPlay and doesn’t need to be retrofitted into your car in any significant way.
It’s important to note that Apple does not offer a specific driving mode on iPhones or a single CarPlay app, in contrast to Android. There is a Driving Focus mode that disables phone distractions while you are driving, but there is no mode that enables you to use a CarPlay-like interface on your phone.
There are gadgets like the Intellidash Plus that allow you to connect in your phone and use CarPlay. Though you’ll need to find a spot to put the screen so it’s both helpful and doesn’t obstruct your view of the road, functionally it’s the same as if you bought a car with CarPlay built-in.
Alternately, you could always replace the factory-installed display/navigation system in your car with an aftermarket device if you’d prefer something a little more streamlined. All you have to do is be prepared to go through the hassle of replacing your old unit with a new one.
Additionally, it depends on your ability to actually improve your car, which isn’t a given. Additionally, keep in mind that many aftermarket devices demand a double DIN slot, although many older vehicles might only have one. There are single-DIN CarPlay units available, however the selection you have is entirely based on your vehicle.
Prices do vary here, but you should expect to pay at least a few hundred dollars. While more sophisticated models like the wireless Kenwood Excelon DNX997XR (opens in new tab) and 10.1-inch Pioneer-WT8600NEX (opens in new tab) can cost upwards of $1,500, units like the Pioneer DMH-1500NEX (opens in new tab) cost just under $500.
Of course, installation costs must also be taken into account. Because you should probably leave this type of work in the skilled hands of a professional. Realistically speaking, it might be worthwhile to get a separate display in order to avoid the hassle.