Set the key to the “On” position in the ignition with the car off, but don’t push the starter. Once the TPMS light has flashed three times, let go of the tire pressure monitor reset button. Start the engine and give the sensor 20 minutes to refresh.
In This Article...
On a 2017 Hyundai Sonata, how do you reset the tire pressure indicator?
Set the key to the “On” position in the ignition with the car off, but don’t push the starter. Once the TPMS light has flashed three times, let go of the tire pressure monitor reset button. Start the vehicle, then wait 20 minutes for the sensor to re-calibrate.
Why, after filling the tires, does my tire pressure light remain on in a Hyundai?
If you’ve inflated your tires, but the air pressure warning light continues to flash, your tire pressure monitoring system is malfunctioning or you have a slow leak. A bright TPMS warning light indicates a problem with a tire pressure sensor, assuming there isn’t a leak in your tire. One of them might be damaged, the lithium-ion battery might be dead, or the TPMS itself might have an internal problem. You’ll need to get your Tire Pressure Monitoring System repaired in any of these scenarios.
Quick Tip: Recheck the tire to ensure it is inflated to the correct air pressure if the TPMS warning light illuminates again after you have inflated it. Low tire pressure indicates an air leak, which requires repair or tire replacement.
How can I turn my tire pressure warning light off?
Don’t start the car; just turn the key to “on.” Till the tire pressure light blinks three times, press and hold the TPMS reset button. Press the button again to start the vehicle. The light ought to turn off in 20 minutes.
Why won’t my tire pressure warning light turn on?
Try the following if your TPMS light is still on after you have inflated your tires to the recommended pressure: 10 minutes at a speed of 50 mph would be plenty. When you start the car again, the TPMS light should not be on because the tire sensors should have been reset.
My tires are in good condition, so why is my low tire pressure sign on?
While the tires appear to be in good condition and the low tire pressure light is ON, you can:
- simply press a button to reset the machine and observe the results; or
- The sensors need to be changed since one or more of them are damaged.
After starting the vehicle, the low tire pressure warning light ought to turn on for a few seconds. The light ought to be turned off right away.
Drive your car, preferably to the closest gas station or tire shop, to check the air pressure in each tire if the low tire pressure warning light is still on.
Typically, a tire with an air pressure that is 10% to 15% low will turn on the warning light. The air pressure inside the tires also tends to drop in cold or icy conditions. Short trips in the car will warm up the tires and raise the pressure in them.
But if the low tire pressure warning light is still on and all the tires are adequately inflated and warmed up, move on to the next step.
Take this opportunity to get out the owner’s manual. The TPMS reset button may be found on the console or in the glove box, depending on the make and model of your car.
Here are the steps to take after finding the TPMS reset button:
- Don’t start the engine after turning the key to the ON position.
- For at least three seconds, press and hold the TPMS reset button before letting go. The system will switch off the warning light and produce a beep or other audible alert.
- To finish the reset process, start the engine and drive the vehicle for 30 to 1 hour at a minimum speed of 19 mph.
- It’s time to check or replace the TPMs sensors if the warning light comes back on.
- To get the system tested, drive to the nearest tire store or dealership.
If your car has TPMS, avoid making it a practice of resetting it every time the low tire pressure warning light comes on.
Your safety is considered during the system’s design. The pace of technological advancement means that the TPMS sensors get better with each new model. However, you should make it a practice to check the tire pressure each time you get in the car in order to get the most out of what you have.
Use a different method than the TPMS to check the tire pressure. A quick visual check is sufficient to establish the existence of a flat.
Here’s a helpful hint: just in case, always have a tiny tire pressure gauge in the glove box. You may check the real tire pressure with this straightforward gadget before the TPMS activates.
Take your vehicle to the shop so they can “re-learn” the sensor with a specific tool if your TPMS light is still on. These tools are available online, but they are not inexpensive. I would advise researching the Autel TS501.
What does the Hyundai Sonata’s TPMS light mean?
Your Hyundai Sonata’s tire pressure monitoring light turning on indicates that one or more tires are either under- or over-inflated. To keep you safe while driving on the road and to prevent any damage to your tires, car tires must be filled to a specified PSI.
A Hyundai Sonata should have a PSI of 34. The tire pressure light on your car’s dashboard will turn on if the tire pressure monitoring system determines that the tire pressure is either too high or too low. The tire pressure sensor needs to be reset after your tires have been inflated to the recommended PSI.
If you don’t know how to reset the tire pressure sensor on a Hyundai Sonata, this page contains all the instructions you require. For detailed instructions on how to reset the TPMS on every Hyundai Sonata model from 2007 through 2020, keep reading.
When will the tire pressure return to normal?
The air in your tire does not leave when the temperature drops. So unless you have additional reasons to suspect a tire hole, you don’t need to go looking for one. In colder climates, the air in your tire actually condenses. Even testing this with other items is possible.
The air inside a basketball will slightly condense as the temperature drops if you leave it outside over night. The air pressure in the ball will likely be back to normal if you return in the morning or afternoon as the temperature rises.
The warning light on your tire-pressure monitoring system (TMPS) may come on because of the cold weather, but this is likely only going to be a temporary issue since warmer temperatures or even just driving your car will heat up the tires, forcing the air within to expand.
You shouldn’t disregard low air pressure in your tires, even though it may return to normal as the temperature rises. Every 10 degrees that the temperature decreases, your tires lose around 1 PSI (pounds per square inch) of pressure. If the temperature fluctuates significantly, this might mount up.
You should also be aware that your tires will gradually lose air pressure on their own over time. They will normally decrease 1 PSI per month. You may want to have your tires pumped if your car experiences significant air pressure loss.
Low tire pressure makes driving extremely risky, and icy roads combined with low tire pressure just makes things worse. Low tire pressure can result in shorter stopping distances, less fuel economy, and potentially shorter tire life!
After a tire rotation, does the TPMS need to be reset?
These sensors measure the air pressure and transmit the information to the dashboard of your car. The batteries can last up to 10 years, and there is no need to reset them after rotating tires or making inflation changes. They provide precise pressure readings.
Should the TPMS be reset after purchasing new tires?
After changing or rotating your tires, or after adding new sensors, you should always reset your TPMS. Even after you have inflated your tires, some sensor manufacturers advise restarting the device. By teaching the primary TPMS system to identify the sensors in their new locations, resetting the TPMS is frequently referred to as retraining the system. TPMS reset procedures vary from vehicle to vehicle and typically involve a specific sequence of ignition and pedal actions, a configuration change in your dashboard menu, or the use of a TPMS Reset Tool.
How soon after tire filling will the light turn on?
After a few kilometers of driving, the light may turn off if the tires are adequately inflated. According to the owner’s manual for the car, the TPMS may need to be reset if the light does not go out automatically after traveling for roughly 10 miles.
Will the TPMS light turn on if my tires are over-inflated?
You most likely have a Tire Pressure Monitoring System (TPMS) installed if you drive a more recent vehicle. Your tires’ internal electrical TPMS system keeps track of their air pressure. The TPMS turns on a dashboard warning light if your tires are either under- or over-inflated. You need to have your tire pressure checked if the light is steady. You should have your TPMS examined if the light is flashing.
Visit one of our stores for a free tire pressure check if you notice the TPMS light. If you’re on the road, fill up your tires with air as soon as you can at a petrol station. unsure how much more to say? For further information, see How to Check Tire Air Pressure.
Don’t panic if the TPMS light illuminates or flashes after you install the spare if you need to change a tire. Nothing to worry about there; that’s merely the system’s way of letting you know it can’t locate a TPMS unit in the spare tire.
Accurate tire pressure is now possible thanks to TPMS. It automatically alerts you when the pressure is low, keeping you safer, preventing damage to your tires, and increasing your MPG.
AutoZone inspects tire sensors, right?
You can determine if your tire pressure monitoring system is corroding or failing within your wheel with routine inspection; if so, you will need to replace it. For your repair, AutoZone carries every tire pressure monitoring system item you’ll need, enabling you to drive again efficiently and safely.
What distinguishes TPMS from low tire pressure?
A tire pressure monitoring system (TPMS) is built into your car and is intended to monitor the air pressure in each tire. The Low Tire Pressure indicator on your dash goes on automatically when the system detects a low tire. Until the tires are checked and the pressure is adjusted, this light will remain on.
On the other hand, the TPMS light is intended to turn on when there is an issue with the monitoring system itself. For instance, if a sensor in a wheel malfunctions, the TPMS light will illuminate and remain on until the issue has been resolved.
The maintenance process is not replaced by the TPMS system. Even if the indicator is not on, you should physically check your tire pressure at least once every month.
The informative nature of the aforementioned claims warrants independent verification. kindly visit our
Do tires need more than 35 psi?
You might have spotted the words “Max. Press. 35 PSI” somewhere on the sidewall of your tire, just below the large, strong lettering of the manufacturer, for instance.
You may determine the maximum cold pressure required for your tire to bear its maximum weight using that value.
According to Rod Tate, owner of Stafford, Texas’ highly regarded Colony One Auto Center, most average tires need between 32 and 35 pounds per square inch (PSI) of air.
Large vehicles need tires that are substantially larger, between 50 and 60 PSI. Heavy-duty automobiles can ascend much more. As an illustration, the tire in the image below needs 41 pounds per square inch of air.
However, since almost all vehicle manufacturers recommend lower tire inflation pressures than the tires’ maximum pressure, the maximum pressure of the tire may not always be the best pressure for every vehicle on which it can be used.
Instead of using the maximum pressure, you should should stick to the recommended pressure that is printed either within your automobile or in the manual. I’ll explain why in the part that follows.