We frequently receive a lot of inquiries about Toyota Smart Key and push button start from prospective automobile buyers who stop by to visit us about purchasing a brand-new 2016 Toyota RAV4. It’s a useful feature for drivers, but many people looking to buy a car make reservations because they’re worried about what might happen if it breaks down. When we examine how to start your Toyota when Smart Key won’t work, take a look at some of the potential causes and how to handle each situation.
In This Article...
Reasons Why Toyota Smart Key and Push Button Start Won’t Work
Pressing the START button on your brand-new 2016 Toyota Camry and having the engine not start is one of the most discouraging experiences you can have. There are four main causes for this that might happen, and many of them are simple to fix. See how you can respond to the main causes of this, which are described below.
- Low on power is the Toyota Smart Key.
- You have a weak engine battery.
- The brake pedal is not being pressed firmly by your foot.
- It’s possible that you pressed the Smart Key deactivation button by accident.
Some of these problems are far simpler to solve than others. The first thing to do is to check that your foot is firmly on the brake pedal. Without taking that simple step and firmly tapping the brake, this safety function will prevent you from starting the key.
Your key fob’s battery might be low if your 2016 Toyota Prius still won’t start. Try using a different Smart Key or bringing the key fob closer to the START button. Check your owner’s manual for advice on replacing the battery if this appears to be the issue.
Another possible explanation for why your Toyota won’t start with Smart Key is that you accidentally pressed the deactivation switch. A little-known component that can give you trouble is the Smart Key deactivation switch, which is situated below the steering wheel at the bottom of the instrument panel. You only need to turn a switch to resume your activities.
When you push the START button, your instrument panel may darken, which could be a sign that your car’s battery is low. Have a friend jumpstart your car for you if necessary, or check your battery connection. If this keeps happening, you might wish to make an appointment for service with the Toyota of Greensburg Service Department.
How do I turn off my Toyota Smart Key?
in order to prevent your key fob from sending an unlock code.
Push the unlock button twice after depressing the lock button once. It’s been turned off.
How is my Toyota Smart Key reset?
Process for Programming a Toyota Key Fob
- The Toyota’s driver’s seat is where you should be.
- From “off” to “on,” turn your key in the ignition.
- Within five seconds, quickly turn your ignition key from “off” to “on” again.
- Your ignition key needs to be removed.
- Close and reopen the driver’s door twice in the next 40 seconds.
Replace the batteries inside the key fobs
If you haven’t changed the battery in the key fob(s) in a while, do so now before continuing. When you try to reprogram a key fob with a defective battery, it can be a real pain. The batteries are often inexpensive and simple to replace. If you are unsure how to change them, consult your owner’s manual.
Get inside the car
With your car keys and the remote in hand, go in the driver’s seat and lock all the doors. Closing the doors is crucial because if you leave one open, it can disrupt the procedure.
Turn on the ignition
Once seated, turn the key to the “On” position in the ignition to turn the electrical systems on. Do not start the engine and double-check that the ignition is not in the radio mode.
Press the lock button on the remote key
Turn the key back to the “Off” position while holding down the lock button on the fob. At least three times, go through this process, finishing with the key in the “On” position. This notifies your electronic control units that the signal is coming from your key in the ignition and does save the info later. How to Start & Unlock a Car With a Dead Key Fob
Listen for a Lock Sound
You will hear the lock sound once you have completed the aforementioned steps. You have now accessed the programming mode, as indicated by this. Press the lock button once more in the following five seconds to complete the programming.
Programming additional remotes
If there are other remotes, program them successfully by pressing the “Lock” button within 10 seconds after entering the programming mode.
Step out from your car and test the result
Close all doors as you exit the vehicle and take your key fobs with you. Test the functionality of both unlocks with each of your key fobs that were programmed.
Why doesn’t my automobile recognize my key fob?
The most frequent cause of a keyless entry system failing to send signals is a faulty battery in the key fob. Use the extra key fob to unlock the car and turn on the ignition if one is available.
Use the key that is included in the spare fob if it is not available to unlock the door. Check your owner’s manual for information on how to start your automobile when the key fob malfunctions.
After changing the battery, is the Toyota key fob required to be reprogrammed?
A remote key fob needs to be associated with your vehicle particularly in order to be secure.
This stops people who drive the same make and model of automobile as you from using their remote to access your car. You’ll need to reprogram the fob if changing the batteries has erased this connection or if it was somehow disrupted in order for it to once again recognize your automobile.
Standard programming sequence
Your key fob can typically be reconfigured by following this typical procedure:
Instead of starting and then returning to the locked position, turn the key into the run position. Repeat this multiple times.
You’ll typically hear a chime or other sound when you’ve cycled the key enough times. At that point, you can push the lock or unlock button on your key fob to hear another chime.
Why won’t my keyless entry work?
- You’re not depressing the brake pedal all the way. As you push the Start button, make sure your foot is firmly on the brake pedal.
- The battery in your Smart Key is low or dead. Try pressing while holding your Smart Key near to the Start button. You may need to replace the Smart Key battery if this doesn’t work. Your Owner’s Manual contains directions for doing this.
- The car’s engine battery is underpowered. You must go to your nearby Toyota Service Center for a diagnosis and perhaps a new battery if this is the case.
- Unintentionally, the Smart Key deactivation switch was engaged. A deactivation switch, which is situated at the bottom of the instrument panel on the dashboard just beneath the steering wheel, might be available in your Toyota vehicle.
What would prevent a push-button start from functioning?
Your engine cannot be started by a defective starter. Try jumping it straight if you think your starter could be defective. If the starter still won’t start your engine after trying these things, you might need to buy a new starter or a new solenoid, module, or relay.
What should I do after changing the battery in my key fob?
The majority of people use their key fob to unlock their car doors and trunk. But what occurs if the battery runs out? You might believe that getting a new key fob requires visiting a dealership or a locksmith, but did you know that you can simply reset it yourself?
This is how:
Find the little button on your key fob first. This is typically found on the fob’s backside.
2. For around 15 seconds, press and hold the button.
3. Release the button after 15 seconds, and your key fob should be reset!
The owner’s manual for your car should always be consulted if you have any issues or inquiries.
Simply press and hold the reset button for a few seconds if your key fob has one. Remove the battery cover and press the tiny reset button on the circuit board if your key fob lacks a reset button.
What distinguishes keyless entry from smart keys?
More remote actions are possible with smart keys than with a typical keyless entry fob. Without touching a button, smart keys allow you to lock or open your doors based on how close your car is. Depending on who used the fob last, the chip in a smart key may also calibrate settings and preferences.
How do I find out which battery my key fob uses?
Open your fob to find the battery your automobile key fob uses. There will probably be an engraving that starts with CR followed by a string of digits if the item contains a battery. Check your owner’s manual or search online for your car’s make, model, and year without a battery or engraving.
Will changing the battery on my key fob make it work again?
A dead battery is the most frequent cause of a key fob not functioning. Having said that, your keyfob might be having more serious issues. A key fob replacement or even automobile door lock repair may be necessary if it stops operating after a battery change.
How do I know if changing my key fob battery will fix my car key?
When the key does not function under any conditions, it is likely that the car key fob has a dead battery. On all door locks, all buttons have the same lack of effectiveness. When buttons are pressed, no lights illuminate, suggesting that no signal was transmitted. The backup fob, however, functions flawlessly.
What do I do if my key fob is not working after a battery change?
Before you replace the automobile remotes if your key fob still won’t work after a battery change, make sure your locks are operating properly. Additionally, make sure you didn’t unintentionally deprogram your keychain.
Can you fix a key fob not working after a battery change?
Although replacing the remote’s batteries might be the quickest repair for the problem, this is by no means your only option. Check to see if the key fob or the vehicle is the root of your issue. After determining the root cause, correct or change the damaged components.