The 2017 Hyundai Elantra’s TPMS can be easily reset. Make sure the car is on level, flat ground first. Verify that the tire pressure is within the proper psi range for each tire. The psiAmount should be stamped on the tire’s side if you look there. You’ll want to get in the car after this is finished and switch on the power, but do not start the engine. A button with the label “tpms” or something similar is located to the right of the steering wheel. When it starts to blink, hit it and keep it down. Once it blinks, let the car sit for roughly 20 minutes so that it can readjust. You can switch off the car and then turn it back on when the light stops blinking to be sure the reset was successful.
Can someone kindly explain me how to reset the TPMS as we all know that the 2017 model does not have a TPMS button?
I just looked beneath the steering wheel of my girlfriend’s car, and there is no TPMS button. I did notice a yellow switch after removing the fuse box cover, but I refrained from touching it.
Press the tpms reset button on a 2017 Hyundai Elantra, hold it down until the light flashes three times, and then let go. Turn on the engine and give the sensor 20 minutes to run. Usually, the tire pressure control reset button is located under the steering wheel.
My 2017 Hyundai Elantra lacks a reset button, but the owner’s manual describes an optional tire pressure monitoring system; mine only has a general warning light. A reset button might be present on the pricier model but not on the more basic one like mine.
In This Article...
How Do You Reset A Hyundai Elantra’s TPMS?
You may reset the tire-pressure monitoring system in your Hyundai Elantra once you’ve found the TPMS.
The following steps will show you how to reset the TPMS on a Hyundai Elantra:
1. Turn the ignition to the “ON” position and insert the key.
2. Avoid starting the car.
3. Hold down the TPMS reset button while waiting for the tire pressure light to blink three times.
4. Let go of the TPMS button.
5. Start the vehicle.
6. Permit the sensor to reset for 20 minutes.
Your tire-pressure monitoring system will be reset by following these instructions. After putting air in your tires, it’s crucial to reset your TPMS since it keeps your knowledge of your tire pressure accurate. When your tires need to be inflated, the tire pressure monitoring system will let you know by turning on the tire pressure light.
2009–2017 TPMS Tip Featured Elantra, Elantra Coupe, and Elantra Touring from Hyundai
Mitchell 1 contributes TPMS knowledge to Modern Tire Dealer, a highly regarded journal that produces editorial content targeted at independent tire dealers. This story is being shared on our blog along with a link to the Modern Tire Dealer website, where you may read it in its entirety. The TPMS information in this page can also be found in our ProDemand(r) auto repair information software’s reset procedures tab, along with other crucial reset procedure information for the chosen car.
NEED FOR SPECIAL TOOLS? Yes, a TPMS module on a Hyundai GDS (Global Diagnostic System).
The 2011–2017 Hyundai Elantra, 2014 Elantra Coupe, and 2009–2012 Elantra Touring all have tire pressure monitoring systems (TPMS) that use wheel-mounted tire pressure sensors to keep track of the air pressure in the four road tires. The system accomplishes this by using a receiver, four radio frequency (RF) tire pressure sensors, two warning lights on the instrument panel, and a data circuit.
The low pressure warning light on the instrument cluster will turn on if tire pressure falls below the permitted threshold or if a quick leak is discovered. The TPMS warning indication will be illuminated if the system discovers a fault with the receiver or sensor, or if it discovers a defect that is external to the receiver or sensor. The light will remain on during the whole ignition cycle if the issue is deemed “important.”
There are two operating modes for the tire pressure sensor: stationary/rolling mode and sleep mode. The sensor will record temperature and pressure every four seconds while measuring acceleration every 60 seconds in the stationary/rolling mode. To save battery life, the sensor enters a low current consumption state during sleep mode and stops taking measurements. When new, all sensors are in this condition. The sensor won’t communicate unless the commence command asks it to or the speed of the car reaches 20 mph (32 km/h).
All tires must have their air pressure checked and changed to the specified cold pressure mentioned on the vehicle certification label (located on the driver’s door or door pillar) when the low tire pressure warning light illuminates. Repair the tire as necessary if it has been damaged. Make sure the alarm light is turned off (this may take up to four minutes if the tire is not rapidly re-inflated). Check the tire pressure again if the warning light remains on. Turn the wheel a quarter turn and wait another four minutes if the tire pressure is satisfactory (the sensor may be in an RF null). There is a TPMS issue if the Hyundai Elantra tire pressure light is still on or the TPMS warning indicator is lighted.
NOTE: It must be started if the tire pressure sensor is replaced. Rotation of the wheels and tires has no impact on the TPMS. Check the air pressure in each tire and make any necessary adjustments when the low tire pressure warning light illuminates.
Why, after filling my Elantra’s tires, does the tire pressure light remain on?
Even when the tires are fully inflated, the tire pressure light may occasionally remain on. This could be a result of the TPMS needing to be reset. It might take up to 20 minutes after the TPMS has been reset for the light to turn off. You can also try driving for 10 minutes at speeds greater than 50 mph. If there is a problem with your automobile battery, the tire-pressure light can keep flashing.
Should your tire pressure light be reset?
You should first check the pressure in your tires. Remember to check every tire, including your spare. It should reset your tire pressure indicator as long as your tires are correctly filled and fall within the acceptable range for your car.
You might need to fix your tire, have your TPMS examined, or try one of the following if the light is still on after setting the tire to the appropriate PSI:
- Drive for ten minutes. Attempt to reach a speed of 50 MPH.
- A TPMS reset button or process may be available in your car’s vehicle control center. Examine a professional or consult your owner’s manual (highly recommended).
Important information: If the pressure isn’t set to the car’s specifications, resetting the TPMS with a button or the vehicle control center may have negative effects.
Les Schwab experts are familiar with the reset processes to complete the task if those solutions don’t work. Each sensor can be programmed into the computer system of your car using tools we have. The next time you start your car or truck, or a few miles down the road, the indicator light ought to go out once your tires are correctly inflated or repaired.
Why does my tire pressure light come on in Hyundai when my tires are fine?
Several cars now come with a built-in tire pressure monitoring system (TPMS). An indication light will flash on your dashboard if the air pressure in your tires drops below the recommended level.
The information system in the dashboard may have a menu that shows you which of the four tires is malfunctioning. The TPMS indicator may be on in a number of circumstances, however your tires may not require replacement or upkeep.
If this occurs and all of your tires seem to be in good condition. This light may illuminate even if your tires are in good condition for a number of different reasons. The decrease in outdoor temperature is one explanation. To double-check and confirm it, it is advisable to maintain a tire pressure gauge in the automobile.
Why won’t my tire pressure warning light turn on?
When the TPMS warning light illuminates, proceed with caution. This indicates that at least one of your tires may be at least 25% under-inflated.
*The simplest way to get the most accurate reading is to check the tire pressure before you drive on it when the tire is “cool.” If your TPMS light is on, first check that you have correctly reset your TPMS by following these instructions.
Will my TPMS light automatically turn off if I fill my tires with air after it illuminates?
Several minutes after reinflating the tires to the prescribed pressure, the TPMS light ought to go out.
What happens if I adjust the tire pressure but the light on my tire pressure gauge still doesn’t go out?
The only place that can fix a computer issue that causes the TPMS warning light to turn ON and flash ON for one second and OFF for three seconds is the dealership service center. When the TPMS warning light illuminates and remains on, one or more tires may have low tire pressure. The light ought to go out once the tire is inflated to the recommended tire pressure listed on the door placard. Always check the pressure in all of your tires because one or more of them may not be at the proper pressure.
My tire pressure is fine, so why won’t the light go off?
How to Reset the Tire Pressure Light Try the following if your TPMS light is still on after you have inflated your tires to the recommended pressure: 10 minutes at a speed of 50 mph would be plenty. When you start the car again, the TPMS light should not be on because the tire sensors should have been reset.
How do I reset the TPMS on a 2018 Hyundai Elantra?
Usually found somewhere under the steering wheel, the reset button for the tire pressure monitoring system. Till the tire pressure monitor system light blinks three times, keep the reset button depressed. The sensors should reset about 20 minutes after you restart the vehicle.
How can I turn off the low pressure indicator?
Don’t start the car; just turn the key to “on.” Till the tire pressure light blinks three times, press and hold the TPMS reset button. Press the button again to start the vehicle. The light ought to turn off in 20 minutes.
How long does the tire pressure light remain illuminated?
Even when the tires are in good shape, the low tire pressure light may occasionally remain on. In such circumstances, you should manually check the tire pressure to make sure there is no issue. People frequently witness this light in the coldest part of the day, the morning. However, the light occasionally turns off when the temperature rises. In any case, until the air warms up and expands, your tires may still be a few PSI under-inflated in cool weather.
A defective tire pressure sensor often exhibits three symptoms. When you discover that your tires are flat but the sensor didn’t alert you, it is the first scenario. The second sign that anything is wrong with the sensors is when your ECU turns on the TPMS light on your dashboard. When the sensor suggests that you have a flat tire when you are aware that you don’t, it is the third indication of an inaccurate alert.
After a few kilometers of driving with properly inflated tires, the sensor light typically turns off. However, you should reset the TPMS in accordance with the directions in the owner’s manual if it doesn’t turn off automatically after traveling for around 10 miles.
In 2008, the U.S. Department of Transportation mandated that tire pressure monitoring systems be installed in all automobiles (TPMS). As a result, even if you can reset it, the TPMS in your car cannot be turned off.
Technically, driving with the TPMS light on is possible, but it is not recommended. The sensor alert indicates either an under- or over-inflated tire. Ignoring this warning could result in excessive tire wear or possibly a blowout, all of which could be dangerous for you and other road users.