The newer BMW models contain a feature known as a tire pressure control display that determines whether the tires have the right quantity of air in them. This operates by increasing the measured number of tire revolutions as the radius of the car tire decreases owing to less air.
Since most tires have different designs when compared to one another, the issue arises when switching from winter to summer tires and vice versa and causes the tire pressure control display on the on-board computer to activate. Fortunately, BMW automobiles have a reset button for the tire pressure control display.
You can use the iDrive system to verify the status of your car if the tire-pressure warning symbol displays in the instrument cluster or in alerts.
Select My vehicle from the main menu, then tap Vehicle status, and then check the icon for the Tire Pressure Monitor to turn it on. Your tires’ current pressure is shown on the tire pressure meter. If you got a warning, it advised you to reset the device by selecting Perform reset on the TPMS information screen.
After the reset, if all tires display green, the pressure is accurate. Incorrect pressure is indicated by a red accent on a tire.
In This Article...
The warning light for low tire air pressure is on. Next, what?
Quick Tip: Keep a tire gauge with you at all times in the glove box so you can quickly check the air pressure once a month. Always inspect the tires when they are cold, preferably in the morning.
- If it appears during a cold morning or just before you start driving When it becomes colder, your tires’ air pressure will decrease. In reality, the pressure will decrease more as the temperature drops. The TPMS dashboard warning light will turn on when the tire air pressure drops by 25% or more. Your tires will need to be inflated, but you should be careful not to overfill them because the air will expand as the tires warm up.
Quick Tip: The TPMS Warning Light reset button is available on some vehicles. Reset the warning light on your instrument panel once you’ve inflated the tires to the proper pressure.
How can a flat tire light be turned off?
Don’t start the car; just turn the key to “on.” Till the tire pressure light blinks three times, press and hold the TPMS reset button. Press the button again to start the vehicle. The light ought to turn off in 20 minutes.
Why is the tire pressure light on in my BMW?
What it means: Your vehicle’s tire pressure will be too low and the BMW tire pressure monitoring system (TPMS) will notify you. When air pressure is 25% below the usual suggested pressure for your BMW model, the warning light turns on. Low tire pressure could put your BMW at danger for tire failure, excessive tire wear and tear, handling issues, and decreased fuel efficiency.
What to do if it comes on: Turn off your car and check the pressure in each tire if the TPMS light comes on when you start it. Ensure that the tires are inflated to the optimum pressure. The recommended tire pressure is printed in your owner’s handbook or on a placard inside the driver-side door of your car.
Find a gas station with air pumps, check the tire pressure, and add air as necessary if the TPMS indicator illuminates while you are driving. The TPMS light will also come on if your tire suddenly flattens as a result of damage. Pull over right away and inspect your tires if you see this light and experience a difference in how your car handles. Many BMW automobiles come with run-flat tires already mounted from the manufacturer with no spare tire. If so, move cautiously to a BMW service center in the area. You will need to hire a tow truck if you have fitted aftermarket tires that are not run flats.
It often denotes a TPMS malfunction if the indicator glows and flashes. The first step is to check the pressure in each of your tires once more and add air if needed. Your best option is to take it to a qualified BMW mechanic for diagnosis if the TPMS light is still on after adding air.
Note: Extreme weather changes can have an impact on tires, particularly in the colder winter months. It’s a good idea to inspect your tires each month.
What actions are required to turn off the light: If your tire pressure is too low, you should fill them up with air and then reset your TPMS (see the directions in your owner’s manual to do this). If this doesn’t work, you’ll need to visit your local BMW repair shop for an accurate diagnosis.
Why won’t my tire pressure warning light turn on?
When the TPMS warning light illuminates, proceed with caution. This indicates that at least one of your tires may be at least 25% under-inflated.
*The simplest way to get the most accurate reading is to check the tire pressure before you drive on it when the tire is “cool.” If your TPMS light is on, first check that you have correctly reset your TPMS by following these instructions.
Will my TPMS light automatically turn off if I fill my tires with air after it illuminates?
Several minutes after reinflating the tires to the prescribed pressure, the TPMS light ought to go out.
What happens if I adjust the tire pressure but the light on my tire pressure gauge still doesn’t go out?
The only place that can fix a computer issue that causes the TPMS warning light to turn ON and flash ON for one second and OFF for three seconds is the dealership service center. When the TPMS warning light illuminates and remains on, one or more tires may have low tire pressure. The light ought to go out once the tire is inflated to the recommended tire pressure listed on the door placard. Always check the pressure in all of your tires because one or more of them may not be at the proper pressure.
How is a service tire monitor removed?
The service tire monitor system continues to report low tire pressure no matter how many times I check, deflate, and re-inflate the air in my tires. Can I fix my tire monitor system in any way?
In less than two minutes, find out if your auto insurance is being overcharged.
It must be stressful to assume your tire pressure is low all the time! Fortunately, there are quick fixes for service tire monitor systems.
Resetting the system is the simplest technique to repair the service tire monitor system in your car. When the sensors occasionally need extra assistance, there are two ways to reset the system.
Driving for at least 10 minutes at highway speeds is the first step towards resetting the system. When you start the car again or after your current drive, the light ought to go off.
You should reset the TPMS light if the approach described above doesn’t work. You can accomplish this by:
- without starting the engine, turning the ignition to the on position.
- Locate the TPMS button, then press and hold it until the alert flashes or goes away.
- driving around for a while, stopping, and then starting the car again.
The service tire monitor system should be maintained by a qualified technician if neither of the aforementioned approaches succeeds.
Download Jerry to save money on your auto insurance if you’re searching for something to do while you’re waiting for the technician to finish the repairs. The Jerry app, a registered broker that provides end-to-end support, gathers reasonable rates, assists you in switching plans, and, once you’ve made a decision, will even assist you in canceling your old policy.
How long does it take for a BMW tire pressure reset?
When the tire pressure light blinks three times, release pressure on the TPMS reset button. For the sensors to reset, start the car and let it run for 20 minutes. The button to reset the tire pressure monitor is under the steering wheel.
How can my BMW 3 Series be reset?
The mechanic will reset the computer in your BMW after the service is complete so it can record your mileage and let you know when the car will need maintenance again in the future. However, the techniques listed below can help you if you maintain your own car but are unclear of how to reset the computer system.
- With the engine off, turn the key to the ON position.
- For TEN seconds, press and HOLD the ODOMETER button. It can be found at the Instrument Cluster’s extreme bottom LEFT corner.
- The dash screen will display FGSTNR along with a number. Your chassis number is this.
- The LAST FOUR numerals are added. Ex: 3+4+5+6= 18 Your UNLOCK CODE is going to be 18.
- Press and hold the ODOMETER button one more until the FGSTNR clearing area appears.
- Press the odometer button until the upper Menu area (entering code menu) reaches 19 after the bottom area has cleared; When you do, the text will appear at the bottom: Press the odometer button to enter your unlock code after turning the lock on. This is seen in the bottom portion.
- The screen will appear as in the image above after a little period, at which point the menu will once again appear at the top. To access the number 21 menu, press the odometer button.
- On the screen’s bottom, it will say: RESET? To complete the reset, press the odometer button.
Your BMW’s computer has been restarted! The existing settings must now be added again, or new ones must be added.
**NOTE: Slowly repeat the procedures if you are unable to reset the BMW computer on your first attempt. If you’re still having trouble, ask the dealership for help or refer to your car’s owner’s manual.
Can the tire pressure monitoring system be turned off?
Yes, it is possible to disable your tire pressure monitoring device using a smart, non-intrusive approach. You only need to use an emulator created to get around the TPMS. The TPMS bypass emulator is a tiny box-shaped gadget containing technology that allows you to “switch off” your tire pressure monitoring system.
How long does the tire pressure light remain illuminated?
After a few kilometers of driving, the light may turn off if the tires are adequately inflated. According to the owner’s manual for the car, the TPMS may need to be reset if the light does not go out automatically after traveling for roughly 10 miles.
Why are my tires in good condition but my tire pressure sign is on?
It’s likely that one or more of your tires have low air pressure if you see the tire pressure indicator turn on. However, even if your tires are in good condition, there are a number of things that could cause the sensors to go off, so you shouldn’t rely only on the data from the tire pressure monitoring system of your car.
Is driving permitted while the tire pressure light is on?
You should be able to find our store or an air pump if the light just came on and you need to get there. However, it is unsafe to keep driving while the light is on. This is why: When you drive your car with low tire pressure, you accelerate the premature and severe tire wear.